Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 910M is a compact wheel loader designed for material handling, loading, stockpiling, and general construction applications. It is part of Caterpillar's M Series wheel loader lineup and is commonly used in aggregate yards, landscaping, agriculture, municipal work, and light construction. The 910M features articulated steering, a front-mounted loader arm, and a bucket attachment for efficient loading and transport of loose materials. It is built for maneuverability, operator visibility, and productivity in confined work areas. The model is available with multiple attachment options and is used in applications requiring a versatile, mid-size wheel loader.
| Breakout force | 11,774.00 lbf (52.40 kN) - Starting 2018 |
|---|---|
| Bucket Capacity | 1.7 - 2.5 (1.3 - 1.9) - Starting 2019 |
| Carriage width | 61.00 in (1,550.00 mm) - Starting 2017 |
| Clearance: full lift, 45° dump | 119.00 in (3,026.00 mm) - Starting 2018 |
| Dig depth | 11.60 in (294.00 mm) - Starting 2017 |
| Digging depth | 3.10 in (78.00 mm) - Starting 2017 |
| Engine Power | 92.00 hp (68.61 kw) - Starting 2019 |
| Engine type | Cat C4.4 ACERT - Starting 2019 |
| F Length: rear axle to bumper | 62.00 in (1,590.00 mm) - Starting 2017 |
| Fork tine length | 47.00 in (1,200.00 mm) - Starting 2017 |
| Full lift clearance | 136.00 in (3,457.00 mm) - Starting 2017 |
| Full lift reach | 19.00 in (502.00 mm) - Starting 2017 |
| G Length: hitch to front axle | 51.00 in (1,300.00 mm) - Starting 2017 |
| Ground reach | 27.00 in (693.00 mm) - Starting 2017 |
| H Length: wheel base | 102.00 in (2,600.00 mm) - Starting 2017 |
| Height: overall | 202.00 in (5,140.00 mm) - Starting 2018 |
| Length: overall | 277.00 in (7,043.00 mm) - Starting 2018 |
| Level arm clearance | 64.00 in (1,640.00 mm) - Starting 2017 |
| Level arm reach | 53.00 in (1,354.00 mm) - Starting 2017 |
| Load center | 23.00 in (600.00 mm) - Starting 2017 |
| Max Dump Height | 9.20 ft (2.80 m) - Starting 2019 |
| Maximum fork spacing | 60.00 in (1,526.00 mm) - Starting 2017 |
| Minimum fork spacing | 11.00 in (300.00 mm) - Starting 2017 |
| Net Power | 97.00 hp (72.33 kw) - Starting 2021 |
| Operating Weight | 17,893.00 lbs (8,116.14 kg) - Starting 2021 |
| Overall height | 174.00 in (4,443.00 mm) - Starting 2017 |
| Overall length | 264.00 in (6,719.00 mm) - Starting 2017 |
| P Carry height: bucket pin | 17.00 in (448.00 mm) - Starting 2017 |
| R Width: bucket | 94.00 in (2,401.00 mm) - Starting 2017 |
| Rated capacity 100% | 2.50 cu yd (1.90 cu m) - Starting 2017 |
| Rated capacity 110% | 2.60 cu yd (2.00 cu m) - Starting 2017 |
| Rated load (% of full turn tip): 50% of tip (SAE J1197) | 4,326.00 lbs (1,963.00 kg) - Starting 2017 |
| Rated load (% of full turn tip): 50% of tip (SAE J1197)** | 4,326.00 lbs (1,963.00 kg) - Starting 2018 |
| Rated load (% of full turn tip): 60% of tip - rough terrain (EN474-3) | 5,191.00 lbs (2,355.00 kg) - Starting 2017 |
| Rated load (% of full turn tip): 60% of tip - rough terrain (EN474-3)** | 5,191.00 lbs (2,355.00 kg) - Starting 2018 |
| Rated load (% of full turn tip): 80% of tip - firm and level (EN474-3) | 6,921.00 lbs (3,141.00 kg) - Starting 2017 |
| Rated load (% of full turn tip): 80% of tip - firm and level (EN474-3)** | 6,921.00 lbs (3,141.00 kg) - Starting 2018 |
| Reach: 2130 mm (7'0") clearance, 45° dump | 74.00 in (1,881.00 mm) - Starting 2018 |
| Reach: full lift, 45° dump | 47.00 in (1,208.00 mm) - Starting 2018 |
| Reach: level arm, level bucket | 107.00 in (2,725.00 mm) - Starting 2018 |
| S Width: tread center | 70.00 in (1,800.00 mm) - Starting 2017 |
| Struck capacity | 2.30 cu yd (1.75 cu m) - Starting 2017 |
| T Turning radius: over bucket | 213.00 in (5,419.00 mm) - Starting 2017 |
| Tip Load | 13,237.00 lbs (6,004.21 kg) - Starting 2021 |
| Tipping load - full turn (ISO 14397-1) | 8,652.00 lbs (3,926.00 kg) - Starting 2017 |
| Tipping load - full turn (ISO 14397-1)* | 8,652.00 lbs (3,926.00 kg) - Starting 2018 |
| Tipping load - full turn, ISO 14397-1 | 9,970.00 lbs (4,524.00 kg) - Starting 2019 |
| Tipping load - full turn, ISO 14397-1* | 9,970.00 lbs (4,524.00 kg) - Starting 2018 |
| Tipping load - full turn, rigid tire | 10,606.00 lbs (4,812.00 kg) - Starting 2019 |
| Tipping load - full turn, rigid tire** | 10,606.00 lbs (4,812.00 kg) - Starting 2018 |
| Tipping load - straight (ISO 14397-1) | 10,221.00 lbs (4,637.00 kg) - Starting 2017 |
| Tipping load - straight (ISO 14397-1)* | 10,221.00 lbs (4,637.00 kg) - Starting 2018 |
| Tipping load - straight, ISO 14397-1 | 11,958.00 lbs (5,426.00 kg) - Starting 2019 |
| Tipping load - straight, ISO 14397-1* | 11,958.00 lbs (5,426.00 kg) - Starting 2018 |
| Tipping load - straight, rigid tire | 12,457.00 lbs (5,652.00 kg) - Starting 2019 |
| Tipping load - straight, rigid tire** | 12,457.00 lbs (5,652.00 kg) - Starting 2018 |
| Travel Speed(Fwd/Rev) | 25 / 25 mph - Starting 2021 |
| Turning radius, bucket at carry | 217.00 in (5,514.00 mm) - Starting 2018 |
| U Width: over tires | 88.00 in (2,259.00 mm) - Starting 2017 |
| V Turning radius: outside of tires | 185.00 in (4,716.00 mm) - Starting 2017 |
| W Turning radius: inside of tires | 96.00 in (2,446.00 mm) - Starting 2017 |
| Width: bucket | 94.00 in (2,401.00 mm) - Starting 2017 |
| Front | Fixed; Locking differential (standard) |
|---|---|
| Rear | Oscillating 11 degrees; Locking differential (Standard) |
| Bucket Capacities | 1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3) |
|---|
| Fops | ISO 3449:2005 Level II |
|---|---|
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. |
| Rops | ISO 3471:2008 |
| Height | 9.83 ft (3.00 m) |
|---|---|
| Length | 22.50 ft (6.86 m) |
| Weight | 18,199.00 lbs (8,254.94 kg) |
| Width | 7.33 ft (2.24 m) |
| Bore | 4.20 in (10.67 cm) |
|---|---|
| Displacement | 268.00 cu in (4,391.74 cu cm) |
| Emissions | Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
| Engine Model | Cat C4.4 ACERT |
| Maximum Gross Power | 100.00 hp (74.57 kw) |
| Maximum Gross Power - Iso 14396 | 100.00 hp (74.57 kw) |
| Maximum Gross Power - Iso 14396 (Din) | 101.00 hp (75.32 kw) |
| Maximum Gross Power - Maximum Engine Speed | 2350 rpm |
| Maximum Gross Power - Sae J1995 | 102.00 hp (76.06 kw) |
| Maximum Gross Torque - Iso 14396 | 332.00 lbs ft (450.13 nm) |
| Maximum Gross Torque - Sae J1995 | 336.00 lbs ft (455.55 nm) |
| Maximum Net Torque - Iso 9249 | 329.00 lbs ft (446.06 nm) |
| Maximum Net Torque - Sae J1349 | 325.00 lbs ft (440.64 nm) |
| Net Power | 97.00 hp (72.33 kw) |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Rated Net Power - Iso 9249 | 97.00 hp (72.33 kw) |
| Rated Net Power - Iso 9249 (Din) | 98.00 hp (73.08 kw) |
| Rated Net Power - Rated Engine Speed | 2200 rpm |
| Rated Net Power - Sae J1349 | 96.00 hp (71.59 kw) |
| Stroke | 5.00 in (12.70 cm) |
| Hydraulic Cycle Time - Dump, At Maximum Reach | 1.4 s |
|---|---|
| Hydraulic Cycle Time - Float Down, Maximum Lift To Ground Level | 3.7 s |
| Hydraulic Cycle Time - Rackback | 2.2 s |
| Hydraulic Cycle Time - Raise, Ground Level To Maximum Lift | 5.2 s |
| Hydraulic Cycle Time - Total Cycle Time | 12.5 s |
| Maximum Flow - Implement Pump | 32.00 gpm (121.12 lpm) |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow | 24.00 gpm (90.84 lpm) |
| Maximum Flow - Implement Pump - 4th Function, Maximum Flow | 24.00 gpm (90.84 lpm) |
| Maximum Working Pressure - Implement Pump | 3408 psi |
| Relief Pressure - Tilt Cylinder | 4931 psi |
| Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure | 3046 psi |
| Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure | 3046 psi |
| Rated Bucket Capacity | 2.5 cu yd |
|---|
| Operating Weight | 17,893.00 lbs (8,116.14 kg) |
|---|
| Axles - Front Center Differential | 2.00 gal (7.57 l) |
|---|---|
| Axles - Rear Center Differential | 2.00 gal (7.57 l) |
| Cooling System | 5.70 gal (21.57 l) |
| Diesel Exhaust Fluid (Def) Tank | 5.00 gal (18.93 l) |
| Engine Crankcase | 2.30 gal (8.71 l) |
| Fuel Tank | 40.70 gal (154.05 l) |
| Hydraulic System - Including Tank | 25.90 gal (98.03 l) |
| Hydraulic Tank | 14.50 gal (54.88 l) |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Transmission | 0.90 gal (3.41 l) |
| Maximum Flow - Steering Pump | 17.00 gpm (64.35 lpm) |
|---|---|
| Maximum Working Pressure - Steering Pump | 2683 psi |
| Number Of Steering Wheel Turns - Full Left To Full Right Or Full Right To Full Left | 3.75 turns |
| Steering Articulation Angle - Each Direction | 40 degrees |
| Steering Cycle Times - Full Left To Full Right - At 2,350 Rpm: 90 Rpm Steering Wheel Speed | 3.2 s |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
|---|---|
| Note (2) | In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Other Choices Include | 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport |
| Standard Size | 15.5-25 12PR |
| Forward And Reverse - High Range | 25.00 mph (40.23 kph) |
|---|---|
| Forward And Reverse - Low Range, Speed Range 1* | 6.30 mph (10.14 kph) |
| Forward And Reverse - Low Range, Speed Range 2* | 12.50 mph (20.12 kph) |
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |