Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 918M is a compact wheel loader designed for material handling, stockpiling, loading, and general construction work. It is part of Caterpillar's M Series wheel loader lineup and is commonly used in aggregate yards, agriculture, landscaping, municipal work, and light industrial applications. The 918M features articulated steering, a front-mounted loader arm, and a cab configured for operator visibility and control. Typical uses include moving soil, gravel, mulch, pallets, and other loose materials. As a wheel loader, the 918M is built for maneuverability, cycle efficiency, and versatility across jobsite conditions.
| 1st | 10 6.3 - Starting 2017 |
|---|---|
| 2nd | 20 12.5 - Starting 2017 |
| Bore | 4.13 in (105.00 mm) - Starting 2017 |
| Breakout force | 17,356.00 lbf (77.23 kN) - Starting 2018 |
| Bucket Capacity | 1.7 - 2.5 (1.3 - 1.9) - Starting 2019 |
| Clearance: full lift, 45° dump | 109.00 in (2,780.00 mm) - Starting 2018 |
| Dig depth | 2.40 in (62.00 mm) - Starting 2017 |
| engine displacement | 268.00 cu in (4.40 L) - Starting 2018 |
| Engine Model | C4.4 ACERT* - Starting 2017 |
| Engine Power | 112.00 hp (83.52 kw) - Starting 2019 |
| Engine type | Cat C4.4 ACERT - Starting 2019 |
| F Length: rear axle to bumper | 63.00 in (1,615.00 mm) - Starting 2017 |
| Flywheel Power - Gross (SAE J1995) | 117.00 hp (87.00 kW) - Starting 2017 |
| Fuel Tank Capacity | 40.70 US gal (154.00 L) - Starting 2017 |
| G Length: hitch to front axle | 53.00 in (1,350.00 mm) - Starting 2017 |
| Ground Clearance | 13.00 in (348.00 mm) - Starting 2017 |
| H Length: wheel base | 106.00 in (2,700.00 mm) - Starting 2017 |
| Height: overall | 193.00 in (4,928.00 mm) - Starting 2018 |
| High | 40 25 - Starting 2017 |
| High Speeds Reverse | 25.00 mph (40.00 km/h) - Starting 2017 |
| High** | 40 25 - Starting 2018 |
| High** Speeds Reverse | 25.00 mph (40.00 km/h) - Starting 2018 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Dump | 1.8 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Lower | 2.7 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Raise | 4.8 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Total | 9.3 sec - Starting 2017 |
| Hydraulic System Capacity - (includes tank) | 25.90 US gal (98.00 L) - Starting 2017 |
| Length: overall | 264.00 in (6,719.00 mm) - Starting 2018 |
| Max Dump Height | 9.30 ft (2.83 m) - Starting 2019 |
| Maximum Gross Power - ISO 14396 | 115.00 hp (86.00 kW) - Starting 2017 |
| Maximum Gross Power - ISO 14396 (DIN) | 117.00 hp (86.00 kW) - Starting 2017 |
| Net Power | 113.00 hp (84.27 kw) - Starting 2021 |
| No. Cylinders | 4 - Starting 2017 |
| Operating Weight | 20,869.00 lbs (9,466.03 kg) - Starting 2019 |
| P Carry height: bucket pin | 13.00 in (345.00 mm) - Starting 2017 |
| R Width: bucket | 94.00 in (2,401.00 mm) - Starting 2017 |
| Rated capacity 100% | 2.10 cu yd (1.60 cu m) - Starting 2017 |
| Rated capacity 110% | 2.20 cu yd (1.70 cu m) - Starting 2017 |
| Rated Engine RPM | 2200 rpm - Starting 2017 |
| Rated load (50% of full turn tip SAE J1197) | 3,520.00 lbs (1,597.00 kg) - Starting 2017 |
| Rated load (50% of full turn tip* SAE J1197) | 3,520.00 lbs (1,597.00 kg) - Starting 2018 |
| Rated Net Power - ISO 9249 (DIN) | 114.00 hp (84.00 kW) - Starting 2017 |
| Rated Net Power - ISO 9249 EEC | 113.00 hp (84.00 kW) - Starting 2017 |
| Rated Net Power - SAE J1349 | 112.00 hp (83.00 kW) - Starting 2017 |
| Reach: 2130 mm (7'0") clearance, 45° dump | 59.00 in (1,514.00 mm) - Starting 2017 |
| Reach: full lift, 45° dump | 38.00 in (966.00 mm) - Starting 2018 |
| Reach: level arm, level bucket | 93.00 in (2,378.00 mm) - Starting 2018 |
| S Width: tread center | 70.00 in (1,800.00 mm) - Starting 2017 |
| Stroke | 5.00 in (127.00 mm) - Starting 2017 |
| Struck capacity | 1.90 cu yd (1.45 cu m) - Starting 2017 |
| T Turning radius: over bucket | 212.00 in (5,390.00 mm) - Starting 2017 |
| Tip Load | 13,578 6,159) - Starting 2021 |
| Tipping load - full turn, ISO 14397-1 | 12,611.00 lbs (5,722.00 kg) - Starting 2019 |
| Tipping load - full turn, ISO 14397-1* | 12,611.00 lbs (5,722.00 kg) - Starting 2018 |
| Tipping load - full turn, rigid tire | 13,416.00 lbs (6,087.00 kg) - Starting 2019 |
| Tipping load - full turn, rigid tire** | 13,416.00 lbs (6,087.00 kg) - Starting 2018 |
| Tipping load - straight, ISO 14397-1 | 14,964.00 lbs (6,790.00 kg) - Starting 2019 |
| Tipping load - straight, ISO 14397-1* | 14,964.00 lbs (6,790.00 kg) - Starting 2018 |
| Tipping load - straight, rigid tire | 15,588.00 lbs (7,073.00 kg) - Starting 2019 |
| Tipping load - straight, rigid tire** | 15,588.00 lbs (7,073.00 kg) - Starting 2018 |
| Travel Speed(Fwd/Rev) | 25 / 25 mph - Starting 2021 |
| Tread Width | 70.00 in (1,800.00 mm) - Starting 2017 |
| Turning radius, bucket at carry | 213.00 in (5,434.00 mm) - Starting 2018 |
| U Width: over tires | 88.00 in (2,259.00 mm) - Starting 2017 |
| V Turning radius: outside of tires | 192.00 in (4,877.00 mm) - Starting 2017 |
| W Turning radius: inside of tires | 101.00 in (2,563.00 mm) - Starting 2017 |
| Width Over Tires | 88.00 in (2,259.00 mm) - Starting 2017 |
| Width: bucket | 91.00 in (2,320.00 mm) - Starting 2017 |
| Front | Fixed; Locking differential (standard) |
|---|---|
| Rear | Oscillating 11 degrees; Locking differential (standard) |
| Bucket Capacities | 1.3-1.9 m3 (1.7-2.5 yd3) |
|---|
| Fops | SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II |
|---|---|
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. |
| Rops | SAE J1040 MAY94, ISO 3471-1994 |
| Height | 10.17 ft (3.10 m) |
|---|---|
| Length | 22.00 ft (6.71 m) |
| Weight | 20,904.00 lbs (9,481.91 kg) |
| Width | 7.33 ft (2.24 m) |
| Bore | 4.20 in (10.67 cm) |
|---|---|
| Displacement | 268.00 cu in (4,391.74 cu cm) |
| Emissions | Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
| Engine Model | Cat C4.4 ACERT |
| Maximum Gross Power | 115.00 hp (85.76 kw) |
| Maximum Gross Power - Iso 14396 | 115.00 hp (85.76 kw) |
| Maximum Gross Power - Iso 14396 (Din) | 117.00 hp (87.25 kw) |
| Maximum Gross Power - Maximum Engine Speed | 2350 rpm |
| Maximum Gross Power - Sae J1995 | 117.00 hp (87.25 kw) |
| Maximum Gross Torque - Iso 14396 | 369.00 lbs ft (500.29 nm) |
| Maximum Gross Torque - Sae J1995 | 372.00 lbs ft (504.36 nm) |
| Maximum Net Torque - Iso 9249 | 365.00 lbs ft (494.87 nm) |
| Maximum Net Torque - Sae J1349 | 361.00 lbs ft (489.44 nm) |
| Net Power | 113.00 hp (84.27 kw) |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Rated Net Power - Iso 9249 | 113.00 hp (84.27 kw) |
| Rated Net Power - Iso 9249 (Din) | 114.00 hp (85.01 kw) |
| Rated Net Power - Rated Engine Speed | 2200 rpm |
| Rated Net Power - Sae J1349 | 112.00 hp (83.52 kw) |
| Stroke | 5.00 in (12.70 cm) |
| Hydraulic Cycle Time - Dump, At Maximum Reach | 1.8 s |
|---|---|
| Hydraulic Cycle Time - Float Down, Maximum Lift To Ground Level | 2.7 s |
| Hydraulic Cycle Time - Rackback | 2.2 s |
| Hydraulic Cycle Time - Raise, Ground Level To Maximum Lift | 4.8 s |
| Hydraulic Cycle Time - Total Cycle Time | 11.5 s |
| Maximum Flow - Implement Pump | 43.60 gpm (165.03 lpm) |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High | 40.00 gpm (151.40 lpm) |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard | 25.00 gpm (94.63 lpm) |
| Maximum Flow - Implement Pump - 4rd Function, Maximum Flow | 25.00 gpm (94.63 lpm) |
| Maximum Working Pressure - Implement Pump | 4061 psi |
| Note | All cycle times listed are with cylinder snubbing turned off. |
| Relief Pressure - Tilt Cylinder | 4641 psi |
| Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure | 4641 psi |
| Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure | 4641 psi |
| Rated Bucket Capacity | 2.5 cu yd |
|---|
| Operating Weight | 20,917.00 lbs (9,487.80 kg) |
|---|
| Axles - Front | 4.50 gal (17.03 l) |
|---|---|
| Axles - Rear | 4.50 gal (17.03 l) |
| Cooling System | 5.70 gal (21.57 l) |
| Diesel Exhaust Fluid (Def) Tank | 5.00 gal (18.93 l) |
| Engine Crankcase | 2.30 gal (8.71 l) |
| Fuel Tank | 40.70 gal (154.05 l) |
| Hydraulic System - Including Tank | 25.90 gal (98.03 l) |
| Hydraulic Tank | 14.50 gal (54.88 l) |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Transmission | 0.90 gal (3.41 l) |
| Maximum Flow - Steering Pump | 21.70 gpm (82.13 lpm) |
|---|---|
| Maximum Working Pressure - Steering Pump | 3190 psi |
| Number Of Steering Wheel Turns - Full Left To Full Right Or Full Right To Full Left | 3.4 turns |
| Steering Articulation Angle - Each Direction | 40 degrees |
| Steering Cycle Times - Full Left To Full Right - At 2,350 Rpm: 90 Rpm Steering Wheel Speed | 2.3 s |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
|---|---|
| Note (2) | In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Other Choices Include | 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport |
| Standard Size | 17.5-25 12PR |
| Forward And Reverse - High Range | 25.00 mph (40.23 kph) |
|---|---|
| Forward And Reverse - Low Range, Speed Range 1* | 6.30 mph (10.14 kph) |
| Forward And Reverse - Low Range, Speed Range 2 | 12.50 mph (20.12 kph) |
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |