Caterpillar 930G Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 930G ➔

The Caterpillar 930G is a wheel loader designed for material handling, loading, stockpiling, and general construction applications. It is part of Caterpillar's G-series wheel loader lineup and is commonly used in aggregate yards, construction sites, agriculture, and industrial material handling. The 930G features a front-mounted loader bucket, articulated steering, and a diesel powertrain suited for repetitive loading cycles and maneuverability in confined work areas. Typical uses include truck loading, site cleanup, and bulk material transport. The model is recognized for its balance of productivity, operator visibility, and serviceability within the mid-size wheel loader category.

General Specifications

Caterpillar 930G Wheel Loader General Specifications specifications
1st	7.3 4.5 - Starting 2006
2nd	12.3 7.6 - Starting 2006
3rd	24.1 15.0 - Starting 2006
4th	38.3 23.8 - Starting 2006
A Height to top of stack	126.00 in (320.04 cm) - Starting 2006
A Maximum overall length	310.00 in (787.40 cm) - Starting 2006
A Rated operating load (retracted) - @ full articulation	4,622.00 lbs (2,096.51 kg) - Starting 2006
Approx. Shipping Wt.	28,122.00 lbs (12,755.94 kg) - Starting 2005
B Height to top of engine compartment	88.00 in (223.52 cm) - Starting 2006
B Reach horizontal (retracted)	148.00 in (375.92 cm) - Starting 2006
B Reach with forks at ground level	59.00 in (149.86 cm) - Starting 2006
B Wheel base	114.00 in (289.56 cm) - Starting 2006
Bore	3.94 in (10.01 cm) - Starting 2006
Breakout Force	32,115.00 lbf (14,567.00 kgf) - Starting 2005
Breakout force (§) - SAME	30,023.00 lbs (13,618.22 kg) - Starting 2006
Bucket	2.70 cu yd (2.10 cu m) - Starting 2006
Bucket clearance at maximum - lift and level	166.00 in (421.64 cm) - Starting 2006
Bucket width	102.00 in (259.08 cm) - Starting 2006
C Height to top of ROPS	129.00 in (327.66 cm) - Starting 2006
C Load center	24.00 in (60.96 cm) - Starting 2006
C Machine center point to front axle	57.00 in (144.78 cm) - Starting 2006
C Rated operating load (mid-position) - @ full articulation	3,759.00 lbs (1,705.06 kg) - Starting 2006
D Hinge pin height at carry position	22.00 in (55.88 cm) - Starting 2006
D Reach horizontal (mid-position)	187.00 in (474.98 cm) - Starting 2006
D Reach with arms horizontal - and forks level	82.00 in (208.28 cm) - Starting 2006
D Rear axle to counterweight	71.00 in (180.34 cm) - Starting 2006
Digging depth (§)	8.60 in (21.84 cm) - Starting 2006
Dump angle at maximum lift	45 deg - Starting 2006
Dump clearance at full lift and 45° discharge (§)	127.00 in (322.58 cm) - Starting 2006
Dump Clearance at max. height	115.00 in (292.10 cm) - Starting 2005
E Dump clearance at full lift and - 45° discharge angle	135.00 in (342.90 cm) - Starting 2006
E Dump clearance at full lift and - F Hinge pin height at full lift	179.00 in (454.66 cm) - Starting 2006
E Ground clearance	16.00 in (40.64 cm) - Starting 2006
E Rated operating load (extended) - @ full articulation	3,171.00 lbs (1,438.34 kg) - Starting 2006
E Reach with fork at maximum height	30.00 in (76.20 cm) - Starting 2006
Engine Displacement	366.00 cu in (5,997.68 cu cm) - Starting 2006
Engine Model	3056E DIT ATAAC - Starting 2006
F Height to top of engine compartment	88.00 in (223.52 cm) - Starting 2006
F Reach at end of forks with arms - horizontal and forks level	74.00 in (187.96 cm) - Starting 2006
F Reach horizontal (extended)	226.00 in (574.04 cm) - Starting 2006
Flywheel Horse- power	149.00 hp (111.11 kw) - Starting 2005
Flywheel Power: Net	149.00 hp (111.11 kw) - Starting 2006
Fork tine length	48.00 in (121.92 cm) - Starting 2006
Fuel Tank Capacity	59.40 US gal (225.00 L) - Starting 2006
G Clearance horizontal	74.00 in (187.96 cm) - Starting 2006
G Ground to top of tine at - maximum height	173.00 in (439.42 cm) - Starting 2006
G Height to top of ROPS	129.00 in (327.66 cm) - Starting 2006
G Maximum overall height	230.00 in (584.20 cm) - Starting 2006
Ground Clearance	16.00 in (40.64 cm) - Starting 2006
Ground clearance (std. tires)	16.00 in (40.64 cm) - Starting 2006
Ground to top of the tine clearance	154.00 in (391.16 cm) - Starting 2006
H Fork tine length	47.00 in (119.38 cm) - Starting 2006
H Height to top of stack	126.00 in (320.04 cm) - Starting 2006
H Maximum digging depth	6.20 in (15.75 cm) - Starting 2006
H Reach full down (retracted)	73.00 in (185.42 cm) - Starting 2006
Height to center axle	27.00 in (68.58 cm) - Starting 2006
Hydraulic System Capacity - (includes tank)	33.00 US gal (125.00 L) - Starting 2006
Hydraulic Tank Capacity	18.50 US gal (70.00 L) - Starting 2006
J Machine center point to axle	57.00 in (144.78 cm) - Starting 2006
J Reach full down (mid-position)	96.00 in (243.84 cm) - Starting 2006
K Maximum digging depth - (bucket level)	6.20 in (15.75 cm) - Starting 2006
K Reach full down (extended)	111.00 in (281.94 cm) - Starting 2006
K Wheel base	114.00 in (289.56 cm) - Starting 2006
L Clearance full down (retracted)	72.00 in (182.88 cm) - Starting 2006
L Maximum rollback at carry height	57 deg - Starting 2006
L Radius of wheel	27.00 in (68.58 cm) - Starting 2006
Length - rear axle to bumper	71.00 in (180.34 cm) - Starting 2006
Loader clearance radius with bucket in carry position (§)	482.00 in (1,224.28 cm) - Starting 2006
M Clearance full down (mid-position)	106.00 in (269.24 cm) - Starting 2006
M Maximum overall length	310.00 in (787.40 cm) - Starting 2006
M Maximum rollback at ground	52 deg - Starting 2006
Max.	159.00 hp (118.57 kw) - Starting 2006
Max. Reach at max. height	61.00 in (154.94 cm) - Starting 2005
Maximum Forward Speed	23.80 mph (38.30 kph) - Starting 2005
Maximum Reverse Speed	15.00 mph (24.14 kph) - Starting 2005
N Clearance full down (extended)	140.00 in (355.60 cm) - Starting 2006
N Dump clearance at full lift - and 45° discharge angle	135.00 in (342.90 cm) - Starting 2006
N Reach at full lift	42.00 in (106.68 cm) - Starting 2006
No. Cylinders	6 - Starting 2006
O Hinge pin height at carry position	22.00 in (55.88 cm) - Starting 2006
O Maximum rollback at maximum lift	62 deg - Starting 2006
Operating weight	29,020.00 lbs (13,163.27 kg) - Starting 2006
Overall height with bucket at full raise (§)	208.00 in (528.32 cm) - Starting 2006
Overall length	299.00 in (759.46 cm) - Starting 2006
P Maximum rollback at carry height	57 deg - Starting 2006
P Reach at full lift and 45° dump	42.00 in (106.68 cm) - Starting 2006
P Reach at maximum height (retracted)	51.00 in (129.54 cm) - Starting 2006
Product Identification Prefix	TFR - Starting 2005
Q Clearance level bucket at full height	166.00 in (421.64 cm) - Starting 2006
Q Maximum rollback at ground	52 deg - Starting 2006
Q Reach at maximum height (mid-position)	67.00 in (170.18 cm) - Starting 2006
R Maximum hinge pin height	179.00 in (454.66 cm) - Starting 2006
R Reach at maximum height (extended)	83.00 in (210.82 cm) - Starting 2006
Rated bucket capacity	4.00 cu yd (3.10 cu m) - Starting 2006
Rated Capacity	3.00 cu yd (2.30 cu m) - Starting 2005
Rated Engine RPM	2300 rpm - Starting 2006
Rated operating load - Per CEN 474-3 firm level ground	9,739.00 lbs (4,417.54 kg) - Starting 2006
Rated operating load - Per CEN 474-3 rough terrain	7,304.00 lbs (3,313.04 kg) - Starting 2006
Rated operating load - Per SAE J1197	6,087.00 lbs (2,761.02 kg) - Starting 2006
Reach at 45° discharge and 2130 mm (7'0") clearance (§)	69.00 in (175.26 cm) - Starting 2006
Reach at full tilt and 45° discharge (§)	40.00 in (101.60 cm) - Starting 2006
Reach with lift arms horizontal and bucket level	107.00 in (271.78 cm) - Starting 2006
Reach with lift arms horizontal and forks level	67.00 in (170.18 cm) - Starting 2006
S Clearance at maximum height (retracted)	255.00 in (647.70 cm) - Starting 2006
S Maximum overall height	230.00 in (584.20 cm) - Starting 2006
Speeds Reverse - 1st	7.3 4.5 - Starting 2006
Speeds Reverse - 2nd	12.3 7.6 - Starting 2006
Speeds Reverse - Dump	1.7 - Starting 2006
Speeds Reverse - Lower (Empty, Float Down)	2.8 - Starting 2006
Speeds Reverse - Raise	5.0 - Starting 2006
Speeds Reverse - Total	9.5 - Starting 2006
Static tipping load straight (§)	21,222.00 lbs (9,626.15 kg) - Starting 2006
Static tipping load with 40° turn (§)	18,029.00 lbs (8,177.83 kg) - Starting 2006
Static tipping load with level arms and forks, full 40° turn	14,145.00 lbs (6,416.07 kg) - Starting 2006
Static tipping load with level arms and forks, straight	16,169.00 lbs (7,334.14 kg) - Starting 2006
Stroke	5.00 in (12.70 cm) - Starting 2006
Struck capacity	2.50 cu yd (1.90 cu m) - Starting 2006
T Clearance at maximum height - (mid-position)	291.00 in (739.14 cm) - Starting 2006
T Full dump at maximum lift	45 deg - Starting 2006
Tires	600/65R25 GP 3D - Starting 2006
Tires used for measurements	600/65R25 GP 3D - Starting 2006
Tread Width	77.00 in (195.58 cm) - Starting 2006
U Clearance at maximum height (extended)	327.00 in (830.58 cm) - Starting 2006
U Maximum roll back at maximum lift	62 deg - Starting 2006
Width Over Tires	95.00 in (241.30 cm) - Starting 2006
Years Built	2005 - 2007

Axles

Caterpillar 930G Wheel Loader Axles specifications
Axle Oscillation	11 degrees

Blade

Caterpillar 930G Wheel Loader Blade specifications
Width	8.40 ft (2.56 m)

Bucket

Caterpillar 930G Wheel Loader Bucket specifications
Breakout Force	30,349.30 lbs (13,766.23 kg)
Bucket Capacity - Heaped	2.8 cu yd
Bucket Capacity - Struck	2.3 cu yd

Buckets

Caterpillar 930G Wheel Loader Buckets specifications
Bucket Capacities	2.1 m3 - 5.0 m3 2.6 yd3 - 6.5 yd3
Bucket Width	8.40 ft (2.56 m)

Cab

Caterpillar 930G Wheel Loader Cab specifications
Fops	SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Rops	SAE J1040 MAY94, ISO 3471-1994

Dimensions

Caterpillar 930G Wheel Loader Dimensions specifications
Bucket Clearance-Maximum Lift/Carry	11.50 ft (3.51 m)
Bucket Pin Height - Maximum Lift	12.60 ft (3.84 m)
Carry Height	1.20 ft (0.37 m)
Centerline Of Front Axle To Hitch	4.70 ft (1.43 m)
Digging Depth	5.00 in (12.70 cm)
Dump Angle At Maximum Lift	45 degrees
Dump Clearance At Max Lift	9.60 ft (2.93 m)
Dump Clearance At Maximum Lift - 45 Degrees	9.10 ft (2.77 m)
Fork Tine Length	3.94 ft (1.20 m)
Ground Clearance	1.20 ft (0.37 m)
Height	10.67 ft (3.25 m)
Height - Center Of Axle	2.10 ft (0.64 m)
Height - Top Of Exhaust Stack	10.40 ft (3.17 m)
Height - Top Of Hood	85.20 in (216.41 cm)
Height - Top Of Rops/Fops	10.50 ft (3.20 m)
Height To Top Of Cab	10.76 ft (3.28 m)
Hinge Pin Max Height	13.29 ft (4.05 m)
Hook Height At Max Lift - Extended	25.39 ft (7.74 m)
Hook Height At Max Lift - Standard	22.44 ft (6.84 m)
Hook Reach At Max Lift - Extended	5.87 ft (1.79 m)
Hook Reach At Max Lift - Standard	7.30 ft (2.23 m)
Length	24.25 ft (7.39 m)
Length - Rear Axle To Bumper	6.40 ft (1.95 m)
Length W/ Bucket On Ground	24.28 ft (7.40 m)
Length With Bucket On Ground	25.85 ft (7.88 m)
Length With Out Forks On Ground	25.14 ft (7.66 m)
Max Lift Height	12.76 ft (3.89 m)
Overall Height	16.90 ft (5.15 m)
Overall Height - Bucket Raised	16.90 ft (5.15 m)
Overall Length	23.60 ft (7.19 m)
Rack Back Angle - Carry	51 degrees
Rack Back Angle - Ground	50 degrees
Rack Back Angle - Maximum Lift	58 degrees
Reach At Max Height And Dump	3.55 ft (1.08 m)
Reach At Maximum Lift And 45 Degrees Dump	3.60 ft (1.10 m)
Weight	29,044.00 lbs (13,174.15 kg)
Wheel Base	9.20 ft (2.80 m)
Wheel Base Length	9.20 ft (2.80 m)
Wheelbase	9.52 ft (2.90 m)
Width	8.08 ft (2.46 m)
Width - Over Tires	8.00 ft (2.44 m)
Width Over Tires	8.06 ft (2.46 m)

Engine

Caterpillar 930G Wheel Loader Engine specifications
Bore	4.00 in (10.16 cm)
Displacement	366.20 cu in (6,000.96 cu cm)
Eec 80/1269 (1)	150.00 hp (111.86 kw)
Eec 80/1269 (2)	161.00 hp (120.06 kw)
Engine Make	2236
Engine Model	366.00 in (929.64 cm)
Gross Power	161.00 hp (120.06 kw)
Iso 9249 (1997) (1)	150.00 hp (111.86 kw)
Iso 9249 (1997) (2)	161.00 hp (120.06 kw)
Max Torque	80
Maximum Net Power - 2000 Rpm	159.00 hp (118.57 kw)
Net Power	150.20 hp (112.01 kw)
Number Of Cylinders	1
Power Measured @	2300 rpm
Rated Net Power	149.00 hp (111.11 kw)
Sae J1349 (1)	149.00 hp (111.11 kw)
Sae J1349 (2)	159.00 hp (118.57 kw)
Stroke	5.00 in (12.70 cm)

Hydraulic System

Caterpillar 930G Wheel Loader Hydraulic System specifications
Dump Time	1.7 sec
Lower Time	2.8 sec
Pump Flow Capacity	58.20 gpm (220.29 lpm)
Pump Type	variable-displacement axial piston
Raise Time	5 sec
Relief Valve Setting	3756.5 psi

Loader Hydraulic System

Caterpillar 930G Wheel Loader Loader Hydraulic System specifications
Bore (1)	4.50 in (11.43 cm)
Bore (2)	6.00 in (15.24 cm)
Dump	1.7 s
Hydraulic Cycle Time	9.5sec
Lower, Empty, Float Down	2.8 s
Maximum Working Pressure	3755 psi
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf)	58.00 gpm (219.53 lpm)
Pump Flow - Implement Pump	58.00 gpm (219.53 lpm)
Raise	5 s
Relief Pressure - Implement Pump	3755 psi
Stroke (1)	30.60 in (77.72 cm)
Stroke (2)	37.00 in (93.98 cm)
Total	9.5 s

Operating Specifications

Caterpillar 930G Wheel Loader Operating Specifications specifications
Articulation Angle	40 degrees
Dump Clearance	9.30 ft (2.83 m)
Dump Clearance At Full Lift And 45 Degrees Dump Angle	9.70 ft (2.96 m)
Reach - Full Lift And 45 Degrees Dump	3.60 ft (1.10 m)
Static Tipping Load - Full Turn	18,029.00 lbs (8,177.83 kg)

Operational

Caterpillar 930G Wheel Loader Operational specifications
Alternator Supplied Amperage	80 amps
Cooling System Fluid Capacity	10.60 gal (40.12 l)
Engine Oil Capacity	4.30 gal (16.28 l)
Front Axle/Diff Fluid Capacity	6.90 gal (26.12 l)
Front Diff Fluid Capacity	6.90 gal (26.12 l)
Fuel Capacity	59.50 gal (225.21 l)
Hydraulic System Fluid Capacity	33.10 gal (125.28 l)
Operating Voltage	24 V
Operating Weight	27,963.50 lbs (12,684.05 kg)
Rear Axle/Diff Fluid Capacity	6.70 gal (25.36 l)
Rear Diff Fluid Capacity	6.70 gal (25.36 l)
Static Tipping Load - Bucket	20,833.70 lbs (9,450.02 kg)
Static Tipping Load - Forks	15,943.90 lbs (7,232.04 kg)
Static Tipping Load - Material Handler	8,212.30 lbs (3,725.04 kg)
Tire Size	20.5R25
Transmission Fluid Capacity	9.20 gal (34.82 l)
Turning Radius	17.30 ft (5.27 m)

Service Refill Capacities

Caterpillar 930G Wheel Loader Service Refill Capacities specifications
Cooling System	10.60 gal (40.12 l)
Crankcase	4.20 gal (15.90 l)
Front	6.90 gal (26.12 l)
Fuel Tank	59.40 gal (224.83 l)
Hydraulic System - Including Tank	33.00 gal (124.91 l)
Hydraulic Tank	18.50 gal (70.02 l)
Rear	6.60 gal (24.98 l)
Transmission	9.10 gal (34.44 l)

Steering

Caterpillar 930G Wheel Loader Steering specifications
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)	17.60 gpm (66.62 lpm)
Maximum Working Pressure	3500 psi
Minimum Turning Radius - Over Tires	207.00 in (525.78 cm)
Steering Angle - Each Direction	40 degrees
Steering Articulation	40 degrees
Steering Cylinder, Two, Bore	2.80 in (7.11 cm)

Tires

Caterpillar 930G Wheel Loader Tires specifications
Size	17.5-25 12PR L-2
Tread Width	7.90 ft (2.41 m)

Transmission

Caterpillar 930G Wheel Loader Transmission specifications
2	7.60 mph (12.23 kph)
3	15.00 mph (24.14 kph)
4	23.80 mph (38.30 kph)
Forward - 1	4.50 mph (7.24 kph)
Max Speed - Forward	38.00 mph (61.15 kph)
Max Speed - Reverse	24.00 mph (38.62 kph)
Max Speed Forward	23.70 mph (38.14 kph)
Max Speed Reverse	15.60 mph (25.11 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	3
Reverse - 1	4.50 mph (7.24 kph)
Transmission Type	countershaft

Weights

Caterpillar 930G Wheel Loader Weights specifications
Maximum Weight	29,044.00 lbs (13,174.15 kg)
Operating Weight	28,725.00 lbs (13,029.46 kg)
Optional Counterweight	1,036.20 lbs (470.01 kg)