Create a CEG Account  /  CEG Login
☰
Parts
Buyer's Guides
Digital Issues
Videos


Caterpillar 930M Aggregate Handler Wheel Loader Specs

Buckets

Caterpillar 930M Aggregate Handler Wheel Loader Buckets specifications
Bucket Capacities 2.5-2.7 m3 (3.3-3.5 yd3)

Cab

Caterpillar 930M Aggregate Handler Wheel Loader Cab specifications
Declared Sound Levels Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (1) * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Note (2) The Blue Angel environmental label is an optional attachment for Europe only.
Rops ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II

Engine

Caterpillar 930M Aggregate Handler Wheel Loader Engine specifications
Bore 4.00 in (10.16 cm)
Displacement 427.00 cu in (6,997.29 cu cm)
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model Cat C7.1 ACERT
Maximum Gross Power 164.00 hp (122.30 kw)
Maximum Gross Torque - Iso 14396 (Performance Power Mode: Range 1-4) 592.00 lbs ft (802.63 nm)
Maximum Gross Torque - Iso 14396 (Standard Power Mode: Range 1-3*) 592.00 lbs ft (802.63 nm)
Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Performance Power Mode: Range 1-4) 572.00 lbs ft (775.52 nm)
Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Standard Power Mode: Range 1-3*) 572.00 lbs ft (775.52 nm)
Maximum Net Torque - Sae J1349 (Performance Power Mode: Range 1-4) 566.00 lbs ft (767.38 nm)
Maximum Net Torque - Sae J1349 (Standard Power Mode: Range 1-3*) 566.00 lbs ft (767.38 nm)
Maximum Rated Gross Power - Iso 14396 164.00 hp (122.30 kw)
Maximum Rated Gross Power - Iso 14396 (Din) 166.00 hp (123.79 kw)
Maximum Rated Gross Power - Iso 14396 (Din) (Performance Power Mode: Range 1-4) 166.00 hp (123.79 kw)
Maximum Rated Gross Power - Iso 14396 (Din) (Standard Power Mode: Range 1-3*) 162.00 hp (120.81 kw)
Maximum Rated Gross Power - Iso 14396 (Performance Power Mode: Range 1-4) 164.00 hp (122.30 kw)
Maximum Rated Gross Power - Iso 14396 (Standard Power Mode: Range 1-3*) 160.00 hp (119.31 kw)
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 rpm
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 rpm
Note (1) * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4) Spark arrester performance as standard Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power 157.00 hp (117.08 kw)
Rated Net Power - 1,600 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156.00 hp (116.33 kw)
Rated Net Power - 1,600 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Standard Power Mode: Range 1-3*) 158.00 hp (117.82 kw)
Rated Net Power - 1,600 Rpm - Sae J1349 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) 154.00 hp (114.84 kw)
Rated Net Power - 1,800 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Performance Power Mode: Range 1-4) 160.00 hp (119.31 kw)
Rated Net Power - 1,800 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Performance Power Mode: Range 1-4) 162.00 hp (120.81 kw)
Rated Net Power - 1,800 Rpm - Sae J1349 At Minimum Fan Speed (Performance Power Mode: Range 1-4) 157.00 hp (117.08 kw)
Stroke 5.00 in (12.70 cm)

Loader Hydraulic System

Caterpillar 930M Aggregate Handler Wheel Loader Loader Hydraulic System specifications
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Dump (At Maximum Lift Height) 1.5/1.7 seconds
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Float Down (Maximum Lift To Ground Level) 2.7/2.7 seconds
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Raise (Ground Level To Maximum Lift) 5.1/5.7 seconds
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Total Cycle Time 9.3/10.1 seconds
Lift Cylinder, Double Acting - Bore Diameter 4.70 in (11.94 cm)
Lift Cylinder, Double Acting - Rod Diameter 2.60 in (6.60 cm)
Lift Cylinder, Double Acting - Stroke 28.70 in (72.90 cm)
Maximum Flow - Implement Pump 50.00 gpm (189.25 lpm)
Maximum Flow - Implement Pump - 3rd Function* 50.00 gpm (189.25 lpm)
Maximum Working Pressure - Implement Pump 3626 psi
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Note (3) * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Relief Pressure - Tilt Cylinder 4061 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3626 psi
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure 4061 psi
Tilt Cylinder, Double Acting - Bore Diameter 5.90 in (14.99 cm)
Tilt Cylinder, Double Acting - Rod Diameter 3.50 in (8.89 cm)
Tilt Cylinder, Double Acting - Stroke 21.90 in (55.63 cm)

Operating Specifications

Caterpillar 930M Aggregate Handler Wheel Loader Operating Specifications specifications
Full Turn Tip Load 19,563.00 lbs (8,873.64 kg)

Operational

Caterpillar 930M Aggregate Handler Wheel Loader Operational specifications
Operating Weight 31,144.00 lbs (14,126.70 kg)

Power Train

Caterpillar 930M Aggregate Handler Wheel Loader Power Train specifications
Brakes - Parking Spring applied hydraulically released
Brakes - Service Inboard wet disc
Front Axle Fixed
Front Axle - Traction Aid** Locking differential (standard)
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2) Offset rims available to meet European roading requirements.
Note (3) **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle Oscillating
Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65 10.5 degrees
Rear Axle - Traction Aid - Optional Limited slip differential

Service Refill Capacities

Caterpillar 930M Aggregate Handler Wheel Loader Service Refill Capacities specifications
Cooling System 7.90 gal (29.90 l)
Diesel Exhaust Fluid (Def) Tank 5.00 gal (18.93 l)
Engine Crankcase 5.30 gal (20.06 l)
Front Axles 6.90 gal (26.12 l)
Fuel Tank 51.50 gal (194.93 l)
Hydraulic System - Including Tank 43.60 gal (165.03 l)
Hydraulic Tank 23.80 gal (90.08 l)
Rear Axles 6.60 gal (24.98 l)
Transmission - Gear Box 2.20 gal (8.33 l)

Steering

Caterpillar 930M Aggregate Handler Wheel Loader Steering specifications
Maximum Flow - Steering Pump 34.00 gpm (128.69 lpm)
Maximum Steering Torque - 0 Degrees (Straight Machine) 37,155.00 lbs ft (50,374.75 nm)
Maximum Steering Torque - 40 Degrees (Full Turn) 27,747.00 lbs ft (37,619.38 nm)
Maximum Working Pressure - Steering Pump 3500 psi
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed 2.4 s
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited 2.8 s
Steering Cylinder, Double Acting - Bore Diameter 2.80 in (7.11 cm)
Steering Cylinder, Double Acting - Rod Diameter 1.60 in (4.06 cm)
Steering Cylinder, Double Acting - Stroke 17.20 in (43.69 cm)

Transmission

Caterpillar 930M Aggregate Handler Wheel Loader Transmission specifications
Forward And Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Forward And Reverse - Range 2 8.00 mph (12.87 kph)
Forward And Reverse - Range 3 17.00 mph (27.36 kph)
Forward And Reverse - Range 4 25.00 mph (40.23 kph)
Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.