| - Maximum Clamp Opening |
100.00 in (2,520.00 mm) - Starting 2006
|
| A - Tine Length |
63.00 in (1,620.00 mm) - Starting 2006
|
| A Height to top of stack |
127.00 in (3.22 m) - Starting 2001
|
| Approx. Shipping Wt. |
39,198.00 lbs (17,780.00 kg) - Starting 2003
|
| B - Overall Width |
89.00 in (2,261.00 mm) - Starting 2001
|
| B Height to top of engine compartment |
89.00 in (2.25 m) - Starting 2001
|
| Bore |
4.30 in (110.00 mm) - Starting 1998
|
| Breakout Force |
34,666.00 lbf (15,724.00 kgf) - Starting 2003
|
| Breakout force (§) |
33,280.00 lbf (148.40 kN) - Starting 2001
|
| Breakout force [GP, Bolt-on Edges, 2.7 cu m] |
36,576.00 lbf (163.10 kN) - Starting 1998
|
| Breakout force [GP, Bolt-on Edges, 2.9 cu m] |
34,648.20 lbf (154.50 kN) - Starting 1998
|
| Breakout force [GP, Bolt-on Edges, 3.1 cu m] |
32,809.20 lbf (146.30 kN) - Starting 1998
|
| Breakout force [GP, Teeth and Segments, 2.7 cu m] |
36,487.10 lbf (162.70 kN) - Starting 1998
|
| Breakout force [GP, Teeth and Segments, 2.9 cu m] |
34,536.00 lbf (154.00 kN) - Starting 1998
|
| Breakout force [GP, Teeth and Segments, 3.1 cu m] |
32,697.10 lbf (145.80 kN) - Starting 1998
|
| Breakout force [GP, Teeth, 2.5 cu m] |
36,644.10 lbf (163.40 kN) - Starting 1998
|
| Breakout force [GP, Teeth, 2.7 cu m] |
34,715.40 lbf (154.80 kN) - Starting 1998
|
| Breakout force [GP, Teeth, 2.9 cu m] |
32,876.50 lbf (146.60 kN) - Starting 1998
|
| Breakout force [Material Handling, Bolt-on Edges, 3.1 cu m] |
34,827.60 lbf (155.30 kN) - Starting 1998
|
| Breakout force [Material Handling, Bolt-on Edges, 3.3 cu m] |
33,212.90 lbf (148.10 kN) - Starting 1998
|
| Breakout force [Material Handling, Teeth and Segments, 3.1 cu m] |
34,715.40 lbf (154.80 kN) - Starting 1998
|
| Breakout force [Material Handling, Teeth and Segments, 3.3 cu m] |
33,100.80 lbf (147.60 kN) - Starting 1998
|
| Breakout force [Material Handling, Teeth, 2.9 cu m] |
34,894.90 lbf (155.60 kN) - Starting 1998
|
| Breakout force [Material Handling, Teeth, 3.1 cu m] |
33,280.20 lbf (148.40 kN) - Starting 1998
|
| Breakout force [Rock, Bolt-on Edges, 2.7 cu m] |
31,687.90 lbf (141.30 kN) - Starting 1998
|
| Breakout force [Rock, Bottom Strap Teeth, 2.7 cu m] |
33,482.00 lbf (149.30 kN) - Starting 1998
|
| Bucket Arrangement A - Tine Length |
64.00 in (1,626.00 mm) - Starting 2001
|
| Bucket Capacity |
3.79 cu yd (2.90 cu m) - Starting 2013
|
| Bucket Weight |
5,236.00 lbs (2,375.00 kg) - Starting 2013
|
| Bucket Width |
120.00 in (3,058.00 mm) - Starting 2013
|
| Bucket width (§) |
117.00 in (2,970.00 mm) - Starting 2001
|
| C - Back Height |
74.59 in (1,895.00 mm) - Starting 2006
|
| C Height to top of ROPS |
133.00 in (3.37 m) - Starting 2001
|
| Change in Digging depth [High lift arrangement; applies to all listed buckets] |
1.00 in (25.00 mm) - Starting 1998
|
| Change in Dump clearance at full lift and 45° discharge [High lift arrangement; applies to all listed buckets] |
22.00 in (558.00 mm) - Starting 1998
|
| Change in Operating weight [High lift arrangement; applies to all listed buckets] |
463.00 lbs (210.00 kg) - Starting 1998
|
| Change in Overall height with bucket at full raise [High lift arrangement; applies to all listed buckets] |
22.00 in (558.00 mm) - Starting 1998
|
| Change in Overall length [High lift arrangement; applies to all listed buckets] |
20.70 in (525.00 mm) - Starting 1998
|
| Change in Reach at full lift and 45° discharge [High lift arrangement; applies to all listed buckets] |
1.00 in (25.00 mm) - Starting 1998
|
| Change in Reach with lift arms horizontal and bucket level [High lift arrangement; applies to all listed buckets] |
16.70 in (425.00 mm) - Starting 1998
|
| Change in Static tipping load, full 40° turn [High lift arrangement; applies to all listed buckets] |
-2,062.00 lbs (-935.00 kg) - Starting 1998
|
| Change in Static tipping load, straight [High lift arrangement; applies to all listed buckets] |
-1,874.00 lbs (-850.00 kg) - Starting 1998
|
| D - Minimum Opening |
17.64 in (448.00 mm) - Starting 2001
|
| D Hinge pin height at carry position |
9.00 in (230.00 mm) - Starting 2001
|
| Digging depth (§) |
4.80 in (125.00 mm) - Starting 2001
|
| Digging depth [GP, Bolt-on Edges, 2.7 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Bolt-on Edges, 2.9 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Bolt-on Edges, 3.1 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth and Segments, 2.7 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth and Segments, 2.9 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth and Segments, 3.1 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth, 2.5 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth, 2.7 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth, 2.9 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Bolt-on Edges, 3.1 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Bolt-on Edges, 3.3 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Teeth and Segments, 3.1 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Teeth and Segments, 3.3 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Teeth, 2.9 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Teeth, 3.1 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Rock, Bolt-on Edges, 2.7 cu m] |
3.97 in (101.00 mm) - Starting 1998
|
| Digging depth [Rock, Bottom Strap Teeth, 2.7 cu m] |
4.72 in (120.00 mm) - Starting 1998
|
| Dump clearance at full lift and - 45° discharge angle |
114.00 in (2.89 m) - Starting 2001
|
| Dump clearance at full lift and 45° discharge (§) |
107.00 in (2,720.00 mm) - Starting 2001
|
| Dump clearance at full lift and 45° discharge angle [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
112.00 in (2.85 m) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Bolt-on Edges, 2.7 cu m] |
116.00 in (2,945.70 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Bolt-on Edges, 2.9 cu m] |
114.10 in (2,898.40 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Bolt-on Edges, 3.1 cu m] |
112.30 in (2,852.10 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth and Segments, 2.7 cu m] |
112.00 in (2,844.20 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth and Segments, 2.9 cu m] |
110.10 in (2,795.80 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth and Segments, 3.1 cu m] |
108.20 in (2,748.70 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth, 2.5 cu m] |
112.00 in (2,844.20 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth, 2.7 cu m] |
110.10 in (2,795.80 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth, 2.9 cu m] |
108.20 in (2,748.70 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Material Handling, Bolt-on Edges, 3.1 cu m] |
111.90 in (2,843.60 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Material Handling, Bolt-on Edges, 3.3 cu m] |
110.60 in (2,808.20 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Material Handling, Teeth and Segments, 3.1 cu m] |
109.20 in (2,775.60 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Material Handling, Teeth and Segments, 3.3 cu m] |
106.20 in (2,698.30 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Material Handling, Teeth, 2.9 cu m] |
107.60 in (2,733.60 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Material Handling, Teeth, 3.1 cu m] |
106.20 in (2,698.30 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Rock, Bolt-on Edges, 2.7 cu m] |
112.70 in (2,862.50 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [Rock, Bottom Strap Teeth, 2.7 cu m] |
110.50 in (2,807.30 mm) - Starting 1998
|
| Dump Clearance at max. height |
115.00 in (2.92 m) - Starting 2003
|
| Engine Displacement |
439.00 cu in (7.20 L) - Starting 1998
|
| Engine Model |
3126B ATAAC - Starting 2006
|
| F Hinge pin height at full lift |
157.00 in (3.98 m) - Starting 2001
|
| Flywheel Horse- power |
183.00 hp (136.47 kw) - Starting 1998
|
| Flywheel Horsepower |
183.00 hp (136.47 kw) - Starting 2002
|
| Flywheel Power: Max. |
196.00 hp (146.00 kW) - Starting 2001
|
| Flywheel Power: Net |
183.00 hp (136.00 kW) - Starting 2001
|
| Forward Speed - 1st |
4.30 mph (6.90 km/h) - Starting 1998
|
| Forward Speed - 2nd |
7.90 mph (12.70 km/h) - Starting 1998
|
| Forward Speed - 3rd |
13.90 mph (22.30 km/h) - Starting 1998
|
| Forward Speed - 4th |
23.00 mph (37.00 km/h) - Starting 2001
|
| Fuel Tank Capacity |
78.00 US gal (295.00 L) - Starting 1998
|
| Full Turn Static Tipping Load |
19,149.00 lbs (8,686.00 kg) - Starting 2006
|
| G Maximum overall height |
213.00 in (5.40 m) - Starting 2001
|
| Ground Clearance |
16.20 in (412.00 mm) - Starting 2003
|
| Ground clearance (std. tires) |
16.00 in (400.00 mm) - Starting 2001
|
| Ground clearance (std. tires) [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
16.00 in (400.00 mm) - Starting 1998
|
| Group Number - Linkage Arrangement |
Pin-On - Starting 2006
|
| Group Number - Logging Arrangement |
157 - 3466 |
| H Maximum digging depth |
3.30 in (85.00 mm) - Starting 2001
|
| Height to top of engine compartment [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
89.00 in (2.25 m) - Starting 1998
|
| Height to top of ROPS [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
133.00 in (3.37 m) - Starting 1998
|
| Height to top of stack [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
127.00 in (3.22 m) - Starting 1998
|
| High Lift Adjustment - Breakout force (§) |
-1,464.00 lbf (-6.50 kN) - Starting 2001
|
| High Lift Adjustment - Digging depth (§) |
0.00 in (-10.00 mm) - Starting 2001
|
| High Lift Adjustment - Static tipping load, full 40° turn (§) |
-321.00 lbs (-146.00 kg) - Starting 2001
|
| High Lift Adjustment - Static tipping load, straight (§) |
-119.00 lbs (-54.00 kg) - Starting 2001
|
| Hinge pin height at carry position [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
9.00 in (230.00 mm) - Starting 1998
|
| Hinge pin height at full lift [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
157.00 in (3.98 m) - Starting 1998
|
| Hydraulic Cycle Time (rated load) - Dump |
2.2 sec - Starting 2001
|
| Hydraulic Cycle Time (rated load) - Lower (Empty, Float Down) |
2.2 sec - Starting 2001
|
| Hydraulic Cycle Time (rated load) - Raise |
6.3 sec - Starting 2001
|
| Hydraulic Cycle Time (rated load) - Total |
10.7 sec - Starting 2001
|
| Hydraulic Cycle Time - Dump [Rated load in bucket; lowering empty in float] |
2.2 sec - Starting 1998
|
| Hydraulic Cycle Time - Lower (Empty, Float Down) [Rated load in bucket; lowering empty in float] |
2.2 sec - Starting 1998
|
| Hydraulic Cycle Time - Raise [Rated load in bucket; lowering empty in float] |
6.3 sec - Starting 1998
|
| Hydraulic Cycle Time - Total [Rated load in bucket; lowering empty in float] |
10.7 sec - Starting 1998
|
| Hydraulic System Capacity - (includes tank) |
40.40 US gal (153.00 L) - Starting 1998
|
| Hydraulic Tank Capacity |
23.20 US gal (88.00 L) - Starting 1998
|
| J Machine center point to axle |
66.00 in (1.68 m) - Starting 2001
|
| K Wheelbase |
132.00 in (3.35 m) - Starting 2001
|
| L Radius of wheel |
32.00 in (820.00 mm) - Starting 2001
|
| Loader clearance circle with bucket in carry position (§) |
527.00 in (13.38 m) - Starting 2001
|
| Loader clearance circle with bucket in carry position [GP, Bolt-on Edges, 2.7 cu m] |
520.00 in (13.22 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Bolt-on Edges, 2.9 cu m] |
522.00 in (13.25 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Bolt-on Edges, 3.1 cu m] |
523.00 in (13.29 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth and Segments, 2.7 cu m] |
526.00 in (13.36 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth and Segments, 2.9 cu m] |
527.00 in (13.39 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth and Segments, 3.1 cu m] |
529.00 in (13.43 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth, 2.5 cu m] |
526.00 in (13.36 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth, 2.7 cu m] |
550.00 in (13.97 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth, 2.9 cu m] |
529.00 in (13.43 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Bolt-on Edges, 3.1 cu m] |
522.00 in (13.25 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Bolt-on Edges, 3.3 cu m] |
523.00 in (13.28 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Teeth and Segments, 3.1 cu m] |
527.00 in (13.39 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Teeth and Segments, 3.3 cu m] |
528.00 in (13.42 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Teeth, 2.9 cu m] |
527.00 in (13.39 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Teeth, 3.1 cu m] |
528.00 in (13.42 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Rock, Bolt-on Edges, 2.7 cu m] |
526.00 in (13.36 m) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Rock, Bottom Strap Teeth, 2.7 cu m] |
527.00 in (13.38 m) - Starting 1998
|
| M Maximum overall length |
316.00 in (8.03 m) - Starting 2001
|
| Machine center point to axle [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
66.00 in (1.68 m) - Starting 1998
|
| Max. Reach at max. height |
47.00 in (1,202.00 mm) - Starting 2003
|
| Maximum digging depth [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
3.97 in (101.00 mm) - Starting 1998
|
| Maximum Forward Speed |
23.00 mph (37.00 km/h) - Starting 2003
|
| Maximum overall height [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
207.00 in (5.26 m) - Starting 1998
|
| Maximum overall length [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
317.00 in (8.05 m) - Starting 1998
|
| Maximum Reverse Speed |
24.90 mph (40.00 km/h) - Starting 2003
|
| Maximum rollback at carry height |
45 deg - Starting 1998
|
| Maximum rollback at ground |
37.5 deg - Starting 1998
|
| Maximum rollback at maximum lift |
59 deg - Starting 1998
|
| N Reach at full lift |
50.00 in (1.27 m) - Starting 2001
|
| Net Power |
196.00 hp (146.00 kW) - Starting 2006
|
| No. Cylinders |
6 - Starting 1998
|
| O Maximum rollback at maximum lift |
59 deg - Starting 2001
|
| Operating Weight |
42,380.00 lbs (19,223.00 kg) - Starting 2006
|
| Operating weight (§) |
38,890.00 lbs (17,641.00 kg) - Starting 2001
|
| Operating weight [GP, Bolt-on Edges, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,178.00 lbs (17,322.00 kg) - Starting 1998
|
| Operating weight [GP, Bolt-on Edges, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,297.00 lbs (17,376.00 kg) - Starting 1998
|
| Operating weight [GP, Bolt-on Edges, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,411.00 lbs (17,428.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth and Segments, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,387.00 lbs (17,417.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth and Segments, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,506.00 lbs (17,471.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth and Segments, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,621.00 lbs (17,523.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth, 2.5 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,023.00 lbs (17,252.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,142.00 lbs (17,306.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,257.00 lbs (17,358.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Bolt-on Edges, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,164.00 lbs (17,316.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Bolt-on Edges, 3.3 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,255.00 lbs (17,357.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Teeth and Segments, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,374.00 lbs (17,411.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Teeth and Segments, 3.3 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,464.00 lbs (17,452.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Teeth, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,010.00 lbs (17,246.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Teeth, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,101.00 lbs (17,287.00 kg) - Starting 1998
|
| Operating weight [Rock, Bolt-on Edges, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,914.00 lbs (17,656.00 kg) - Starting 1998
|
| Operating weight [Rock, Bottom Strap Teeth, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
38,731.00 lbs (17,573.00 kg) - Starting 1998
|
| Overall height with bucket at full raise (§) |
211.00 in (5,350.00 mm) - Starting 2001
|
| Overall height with bucket at full raise [GP, Bolt-on Edges, 2.7 cu m] |
202.40 in (5,140.30 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Bolt-on Edges, 2.9 cu m] |
204.60 in (5,198.10 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Bolt-on Edges, 3.1 cu m] |
206.90 in (5,256.50 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth and Segments, 2.7 cu m] |
202.40 in (5,140.30 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth and Segments, 2.9 cu m] |
204.60 in (5,198.10 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth and Segments, 3.1 cu m] |
206.90 in (5,256.50 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth, 2.5 cu m] |
202.40 in (5,140.30 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth, 2.7 cu m] |
204.60 in (5,198.10 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth, 2.9 cu m] |
206.90 in (5,256.50 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Bolt-on Edges, 3.1 cu m] |
204.60 in (5,198.20 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Bolt-on Edges, 3.3 cu m] |
206.50 in (5,245.90 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Teeth and Segments, 3.1 cu m] |
204.60 in (5,198.20 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Teeth and Segments, 3.3 cu m] |
206.50 in (5,245.90 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Teeth, 2.9 cu m] |
204.60 in (5,198.20 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Teeth, 3.1 cu m] |
206.50 in (5,245.90 mm) - Starting 1998
|
| Overall height with bucket at full raise [Rock, Bolt-on Edges, 2.7 cu m] |
209.80 in (5,330.10 mm) - Starting 1998
|
| Overall height with bucket at full raise [Rock, Bottom Strap Teeth, 2.7 cu m] |
209.80 in (5,330.10 mm) - Starting 1998
|
| Overall length (§) |
325.00 in (8,260.00 mm) - Starting 2001
|
| Overall length [GP, Bolt-on Edges, 2.7 cu m] |
312.10 in (7,928.20 mm) - Starting 1998
|
| Overall length [GP, Bolt-on Edges, 2.9 cu m] |
314.50 in (7,988.20 mm) - Starting 1998
|
| Overall length [GP, Bolt-on Edges, 3.1 cu m] |
316.90 in (8,048.20 mm) - Starting 1998
|
| Overall length [GP, Teeth and Segments, 2.7 cu m] |
317.70 in (8,070.00 mm) - Starting 1998
|
| Overall length [GP, Teeth and Segments, 2.9 cu m] |
320.10 in (8,130.00 mm) - Starting 1998
|
| Overall length [GP, Teeth and Segments, 3.1 cu m] |
322.40 in (8,190.00 mm) - Starting 1998
|
| Overall length [GP, Teeth, 2.5 cu m] |
317.70 in (8,070.00 mm) - Starting 1998
|
| Overall length [GP, Teeth, 2.7 cu m] |
320.10 in (8,130.00 mm) - Starting 1998
|
| Overall length [GP, Teeth, 2.9 cu m] |
322.40 in (8,190.00 mm) - Starting 1998
|
| Overall length [Material Handling, Bolt-on Edges, 3.1 cu m] |
314.30 in (7,983.20 mm) - Starting 1998
|
| Overall length [Material Handling, Bolt-on Edges, 3.3 cu m] |
316.30 in (8,033.20 mm) - Starting 1998
|
| Overall length [Material Handling, Teeth and Segments, 3.1 cu m] |
319.90 in (8,125.00 mm) - Starting 1998
|
| Overall length [Material Handling, Teeth and Segments, 3.3 cu m] |
321.90 in (8,175.00 mm) - Starting 1998
|
| Overall length [Material Handling, Teeth, 2.9 cu m] |
319.90 in (8,125.00 mm) - Starting 1998
|
| Overall length [Material Handling, Teeth, 3.1 cu m] |
321.90 in (8,175.00 mm) - Starting 1998
|
| Overall length [Rock, Bolt-on Edges, 2.7 cu m] |
317.20 in (8,058.00 mm) - Starting 1998
|
| Overall length [Rock, Bottom Strap Teeth, 2.7 cu m] |
318.70 in (8,096.00 mm) - Starting 1998
|
| P Maximum rollback at carry height |
45 deg - Starting 2001
|
| Product Identification Prefix |
AXX AXR - Starting 2003
|
| Q Maximum rollback at ground |
37.5 deg - Starting 2001
|
| Radius of wheel [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
32.00 in (818.00 mm) - Starting 1998
|
| Rated bucket capacity (§) |
4.50 cu yd (3.50 cu m) - Starting 2001
|
| Rated Capacity |
4.05 cu yd (3.10 cu m) - Starting 2003
|
| Rated Engine RPM |
2200 rpm - Starting 1998
|
| Reach at full lift and 45° discharge (§) |
57.00 in (1,440.00 mm) - Starting 2001
|
| Reach at full lift and 45° discharge [GP, Bolt-on Edges, 2.7 cu m] |
47.90 in (1,216.70 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Bolt-on Edges, 2.9 cu m] |
49.30 in (1,250.80 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Bolt-on Edges, 3.1 cu m] |
50.70 in (1,286.60 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth and Segments, 2.7 cu m] |
51.90 in (1,316.70 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth and Segments, 2.9 cu m] |
53.10 in (1,349.70 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth and Segments, 3.1 cu m] |
54.50 in (1,384.60 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth, 2.5 cu m] |
51.90 in (1,316.70 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth, 2.7 cu m] |
53.10 in (1,349.70 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth, 2.9 cu m] |
54.50 in (1,384.60 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Material Handling, Bolt-on Edges, 3.1 cu m] |
45.70 in (1,160.40 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Material Handling, Bolt-on Edges, 3.3 cu m] |
47.10 in (1,196.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Material Handling, Teeth and Segments, 3.1 cu m] |
49.30 in (1,250.90 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Material Handling, Teeth and Segments, 3.3 cu m] |
50.60 in (1,286.30 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Material Handling, Teeth, 2.9 cu m] |
49.30 in (1,250.90 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Material Handling, Teeth, 3.1 cu m] |
50.60 in (1,286.30 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Rock, Bolt-on Edges, 2.7 cu m] |
51.90 in (1,316.70 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [Rock, Bottom Strap Teeth, 2.7 cu m] |
53.30 in (1,353.30 mm) - Starting 1998
|
| Reach at full lift [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
51.00 in (1.29 m) - Starting 1998
|
| Reach with lift arms horizontal and bucket level |
110.00 in (2,805.00 mm) - Starting 2001
|
| Reach with lift arms horizontal and bucket level [GP, Bolt-on Edges, 2.7 cu m] |
97.50 in (2,477.20 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Bolt-on Edges, 2.9 cu m] |
99.90 in (2,537.20 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Bolt-on Edges, 3.1 cu m] |
102.30 in (2,597.20 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth and Segments, 2.7 cu m] |
103.10 in (2,619.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth and Segments, 2.9 cu m] |
105.50 in (2,679.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth and Segments, 3.1 cu m] |
107.80 in (2,739.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth, 2.5 cu m] |
103.10 in (2,619.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth, 2.7 cu m] |
105.50 in (2,679.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth, 2.9 cu m] |
107.80 in (2,739.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Bolt-on Edges, 3.1 cu m] |
99.70 in (2,532.20 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Bolt-on Edges, 3.3 cu m] |
101.70 in (2,582.20 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Teeth and Segments, 3.1 cu m] |
105.30 in (2,674.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Teeth and Segments, 3.3 cu m] |
107.20 in (2,724.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Teeth, 2.9 cu m] |
105.30 in (2,674.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Teeth, 3.1 cu m] |
107.20 in (2,724.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Rock, Bolt-on Edges, 2.7 cu m] |
102.60 in (2,607.20 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Rock, Bottom Strap Teeth, 2.7 cu m] |
105.90 in (2,689.00 mm) - Starting 1998
|
| Reverse Speed - 1st |
4.70 mph (7.60 km/h) - Starting 1998
|
| Reverse Speed - 2nd |
8.70 mph (13.90 km/h) - Starting 1998
|
| Reverse Speed - 3rd |
15.30 mph (24.50 km/h) - Starting 1998
|
| Reverse Speed - 4th |
25.30 mph (40.50 km/h) - Starting 1998
|
| Static tipping load, full 35° turn (§) |
25,290.00 lbs (11,472.00 kg) - Starting 2001
|
| Static tipping load, full 40° turn (§) |
24,470.00 lbs (11,100.00 kg) - Starting 2001
|
| Static tipping load, full 40° turn [GP, Bolt-on Edges, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,426.00 lbs (10,629.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Bolt-on Edges, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,182.00 lbs (10,518.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Bolt-on Edges, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
22,944.00 lbs (10,410.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Teeth and Segments, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,188.00 lbs (10,521.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Teeth and Segments, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
22,944.00 lbs (10,410.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Teeth and Segments, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
22,703.00 lbs (10,301.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Teeth, 2.5 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,841.00 lbs (10,817.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Teeth, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,589.00 lbs (10,703.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [GP, Teeth, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,343.00 lbs (10,591.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Material Handling, Bolt-on Edges, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,605.00 lbs (10,710.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Material Handling, Bolt-on Edges, 3.3 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,393.00 lbs (10,614.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Material Handling, Teeth and Segments, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,362.00 lbs (10,600.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Material Handling, Teeth and Segments, 3.3 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,151.00 lbs (10,504.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Material Handling, Teeth, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
24,021.00 lbs (10,899.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Material Handling, Teeth, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,803.00 lbs (10,800.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Rock, Bolt-on Edges, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
22,836.00 lbs (10,361.00 kg) - Starting 1998
|
| Static tipping load, full 40° turn [Rock, Bottom Strap Teeth, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
23,127.00 lbs (10,493.00 kg) - Starting 1998
|
| Static tipping load, straight (§) |
27,820.00 lbs (12,621.00 kg) - Starting 2001
|
| Static tipping load, straight [GP, Bolt-on Edges, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,629.00 lbs (12,082.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Bolt-on Edges, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,371.00 lbs (11,965.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Bolt-on Edges, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,117.00 lbs (11,850.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth and Segments, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,391.00 lbs (11,974.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth and Segments, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,131.00 lbs (11,856.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth and Segments, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
25,877.00 lbs (11,741.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth, 2.5 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
27,081.00 lbs (12,287.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,814.00 lbs (12,166.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,552.00 lbs (12,047.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Bolt-on Edges, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,834.00 lbs (12,175.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Bolt-on Edges, 3.3 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,609.00 lbs (12,073.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Teeth and Segments, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,591.00 lbs (12,065.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Teeth and Segments, 3.3 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,366.00 lbs (11,963.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Teeth, 2.9 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
27,288.00 lbs (12,381.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Teeth, 3.1 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
27,056.00 lbs (12,276.00 kg) - Starting 1998
|
| Static tipping load, straight [Rock, Bolt-on Edges, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,067.00 lbs (11,827.00 kg) - Starting 1998
|
| Static tipping load, straight [Rock, Bottom Strap Teeth, 2.7 cu m] [23.5-R25 XHA L3 tires; standard operating configuration] |
26,369.00 lbs (11,964.00 kg) - Starting 1998
|
| Stroke |
5.00 in (127.00 mm) - Starting 1998
|
| Struck capacity (§) |
3.16 cu yd (2.44 cu m) - Starting 2001
|
| Tires used for measurements |
23.5-R25, XHA (L-3 - Starting 2001
|
| Tread Width |
84.00 in (2.14 m) - Starting 1998
|
| Tread width (std. tires) |
84.00 in (2.14 m) - Starting 2001
|
| Tread width (std. tires) [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
84.00 in (2.14 m) - Starting 1998
|
| Weight, Approximate |
5,100.00 lbs (2,310.00 kg) - Starting 2001
|
| Wheelbase [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
132.00 in (3.35 m) - Starting 1998
|
| Width Over Tires |
114.00 in (2.89 m) - Starting 2003
|
| Width over tires (std. tires) |
114.00 in (2.89 m) - Starting 2001
|
| Width over tires (std. tires) [General purpose 3.1 m³ bucket, bolt-on cutting edge, standard tires] |
114.00 in (2.89 m) - Starting 1998
|