Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 950K is a medium wheel loader designed for material handling, stockpiling, truck loading, and general construction work. It is part of Caterpillar's K-series wheel loader lineup and is commonly used in aggregate yards, quarries, waste handling, and site preparation applications. The 950K features a diesel engine, articulated steering, hydraulic lift and tilt functions, and a front-mounted bucket for loading and transport tasks. It is built for productivity, operator visibility, and durability in demanding jobsite conditions. The model is often selected for its balance of operating capacity, maneuverability, and versatility across a range of earthmoving and material handling operations.
| 11 Clearance at full lift and maximum dump | 96.00 in (243.84 cm) - Starting 2016 |
|---|---|
| 14 Carriage height | 48.00 in (121.92 cm) - Starting 2016 |
| 1st | 7.5 4.7 - Starting 2015 |
| 2nd | 14.1 8.8 - Starting 2015 |
| 3rd | 24.8 15.4 - Starting 2015 |
| 4th | 39.8 24.7 - Starting 2015 |
| 4th Speeds Reverse | 23.60 mph (37.98 kph) - Starting 2015 |
| 6 Reach with arms horizontal - and forks level | 68.00 in (172.72 cm) - Starting 2016 |
| 9 Ground to top of tine at maximum - height and fork level | 147.00 in (373.38 cm) - Starting 2016 |
| A - Tine Length | 30.00 in (76.20 cm) - Starting 2013 |
| B - Overall Width | 72.00 in (182.88 cm) - Starting 2013 |
| Breakout force (§) | -1,812.00 lbf (-8.00 kN) - Starting 2015 |
| Bucket Capacity | 3.50-5.00 cu yd (2.70-3.80 cu m) |
| Bucket Weight | 3,014.00-3,600.00 lbs (1,367.13-1,632.93 kg) |
| Bucket Width | 122.00 in (309.88 cm) - Starting 2015 |
| Capacity - struck (§) | 3.30 cu yd (2.52 cu m) - Starting 2013 |
| D - Minimum Opening | 53.00 in (134.62 cm) - Starting 2013 |
| Digging depth (§) | 0.10 in (0.25 cm) - Starting 2015 |
| Dump clearance at maximum lift and 45° discharge (§) | 19.00 in (48.26 cm) - Starting 2015 |
| E - Maximum Clamp Opening | 110.00 in (279.40 cm) - Starting 2013 |
| Emission Standards | Tier 4 Interim equivalent - Starting 2017 |
| Engine Displacement | 427.80 cu in (7,010.40 cu cm) - Starting 2013 |
| Flywheel Power: Gross | 232.00 hp (173.01 kw) - Starting 2013 |
| Group Number - Logging Arrangement | 377 - 0722 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Dump (at Maximum Raise) | 1.8 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Raise (from Carry Position) | 5.9 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Total | 10.0 sec - Starting 2013 |
| J Machine center point to axle | 66.00 in (167.64 cm) - Starting 2015 |
| Loader clearance circle with bucket at carry position (§) | 16.00 in (40.64 cm) - Starting 2015 |
| Machine and work tool availability varies by region. | Contact your local Cat dealer - Starting 2016 |
| Maximum Engine: Gross | 232.00 hp (173.01 kw) - Starting 2015 |
| Maximum Engine: Net | 210.00 hp (156.60 kw) - Starting 2015 |
| Maximum Net Power Engine RPM | 1900 rpm - Starting 2015 |
| Operating weight | 1,326.00 lbs (601.46 kg) - Starting 2015 |
| Overall height with bucket at maximum lift | 20.00 in (50.80 cm) - Starting 2015 |
| Overall length | 24.00 in (60.96 cm) - Starting 2015 |
| ping loads conform to the international standard as (Sept2007). | · CEN EN 474-3: 80% of or hydraulic limit. - Starting 2016 |
| Q Maximum rollback at ground | 45 deg - Starting 2015 |
| Reach at level lift arm and bucket level (§) | 14.00 in (35.56 cm) - Starting 2015 |
| Reach at maximum lift and 45° discharge (§) | 1.00 in (2.54 cm) - Starting 2015 |
| SAE J1197, SAE J732, CEN EN 474-3. Rated load is determined by considering % of machine | stability, hydraulic lift - Starting 2016 |
| Speeds Reverse - 1st | 7.5 4.7 - Starting 2013 |
| Speeds Reverse - 2nd | 14.1 8.8 - Starting 2013 |
| Speeds Reverse - 3rd | 24.8 15.4 - Starting 2013 |
| Speeds Reverse - 4th | 39.8 24.7 - Starting 2013 |
| Static tipping load, articulated (ISO) | -2,622.00 lbs (-1,189.32 kg) - Starting 2015 |
| Static tipping load, articulated (Rigid Tire) | -2,955.00 lbs (-1,340.37 kg) - Starting 2015 |
| Static tipping load, straight (ISO) | -2,820.00 lbs (-1,279.13 kg) - Starting 2015 |
| Static tipping load, straight (Rigid Tire) | -3,174.00 lbs (-1,439.70 kg) - Starting 2015 |
| Static tipping loads and operating weight are based on | · SAE J1197: 50% of full - Starting 2016 |
| the machine configuration for handling target | in your specific machine - Starting 2016 |
| Weight, Approximate | 4,253.00 lbs (1,929.13 kg) - Starting 2013 |
| Front | Fixed |
|---|---|
| Maximum Single-Wheel Rise And Fall | 18.90 in (48.01 cm) |
| Rear | Oscillating ?13 degrees |
| Brakes | Meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 required standards |
|---|
| Breakout Force | 36,194.24 lbs (16,417.45 kg) |
|---|---|
| Bucket Capacity - Heaped | 15.7 cu yd |
| Bucket Capacities | 2.50 to 9.20 m3 (3.25 to 12.00 yd3) |
|---|
| Rops/Fops | Meets SAE and ISO standards |
|---|
| Height | 11.83 ft (3.61 m) |
|---|---|
| Length | 27.25 ft (8.31 m) |
| Weight | 42,811.00 lbs (19,418.77 kg) |
| Width | 8.92 ft (2.72 m) |
| Bore | 4.10 in (10.41 cm) |
|---|---|
| Displacement | 427.80 cu in (7,010.40 cu cm) |
| Engine Make | 2236 |
| Engine Model | Cat? C7.1 ACERT? |
| Maximum Engine Power - 1,900 Rpm - Iso 14396 | 230.00 hp (171.51 kw) |
| Maximum Engine Power - 1,900 Rpm - Iso 14396 - Metric | 234.00 hp (174.50 kw) |
| Maximum Gross Power - 1,900 Rpm - Sae J1995 | 243.00 hp (181.21 kw) |
| Maximum Gross Power - 1,900 Rpm - Sae J1995 - Metric | 245.00 hp (182.70 kw) |
| Maximum Net Power - 1,900 Rpm - Eec 80/1269 | 221.00 hp (164.80 kw) |
| Maximum Net Power - 1,900 Rpm - Eec 80/1269 - Metric | 224.00 hp (167.04 kw) |
| Maximum Net Power - 1,900 Rpm - Iso 9249 | 221.00 hp (164.80 kw) |
| Maximum Net Power - 1,900 Rpm - Iso 9249 - Metric | 224.00 hp (167.04 kw) |
| Maximum Net Power - 1,900 Rpm - Sae J1349 | 221.00 hp (164.80 kw) |
| Maximum Net Power - 1,900 Rpm - Sae J1349 - Metric | 224.00 hp (167.04 kw) |
| Net Power | 210.60 hp (157.05 kw) |
| Net Power - Iso 9249 | 221.00 hp (164.80 kw) |
| Peak Gross Torque - 1,300 Rpm - Sae J1995 | 777.00 lbs ft (1,053.46 nm) |
| Peak Net Torque - 1,400 Rpm - Sae J1349 | 729.00 lbs ft (988.38 nm) |
| Stroke | 5.30 in (13.46 cm) |
| Dump Time | 1.8 sec |
|---|---|
| Hydraulic Cycle Time - Dump, At Maximum Raise | 1.8 s |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.5 s |
| Hydraulic Cycle Time - Raise From Carry Position | 5.9 s |
| Hydraulic Cycle Time - Total | 10 s |
| Implement System - Maximum Operating Pressure | 3800 psi |
| Implement System - Maximum Pump Output At 2,340 Rpm | 90.00 gpm (340.65 lpm) |
| Implement System - Optional 3rd And 4th Function Maximum Flow | 74.00 gpm (280.09 lpm) |
| Implement System - Optional 3rd And 4th Function Maximum Pressure | 3000 psi |
| Lower Time | 2.5 sec |
| Raise Time | 5.9 sec |
| Steering System - Pump Type | Piston |
| Breakout Force | 34,742.00 lbs (15,758.73 kg) |
|---|---|
| Static Tipping Load - Full 40 Degrees Turn - Iso 14397-1* | 25,883.00 lbs (11,740.35 kg) |
| Static Tipping Load - Full 40 Degrees Turn - Rigid Tires** | 27,751.00 lbs (12,587.66 kg) |
| Fuel Capacity | 83.00 gal (314.16 l) |
|---|---|
| Hydraulic System Fluid Capacity | 50.00 gal (189.25 l) |
| Operating Weight | 44,064.00 lbs (19,987.12 kg) |
| Static Tipping Weight | 24,268.50 lbs (11,008.02 kg) |
| Cooling System | 15.90 gal (60.18 l) |
|---|---|
| Crankcase | 4.80 gal (18.17 l) |
| Differential - Final Drives - Front | 11.40 gal (43.15 l) |
| Differential - Final Drives - Rear | 11.40 gal (43.15 l) |
| Fuel Tank - Standard | 83.00 gal (314.16 l) |
| Hydraulic Tank | 49.90 gal (188.87 l) |
| Transmission | 11.40 gal (43.15 l) |
| Standards | Standards |
|---|
| Tires | Choices |
|---|
| Forward - 1 | 4.30 mph (6.92 kph) |
|---|---|
| Forward - 2 | 8.00 mph (12.87 kph) |
| Forward - 3 | 14.10 mph (22.69 kph) |
| Forward - 4 | 23.60 mph (37.98 kph) |
| Max Speed - Forward | 23.60 mph (37.98 kph) |
| Max Speed - Reverse | 24.80 mph (39.91 kph) |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Reverse - 1 | 4.70 mph (7.56 kph) |
| Reverse - 2 | 8.80 mph (14.16 kph) |
| Reverse - 3 | 15.40 mph (24.78 kph) |
| Reverse - 4 | 24.70 mph (39.75 kph) |
| Operating Weight | 44,064.00 lbs (19,987.12 kg) |
|---|