Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 950M (TIER 4/STAGE IV) (2016) ➔

Bucket Capacities

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Bucket Capacities specifications
Bucket Range	2.5-9.2 m? (3.3-12.0 yd?)

Buckets

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Buckets specifications
Bucket Capacities	2.5-9.2 m? (3.3-12.0 yd?)

Dimensions - High Lift

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Dimensions - High Lift specifications
Centerline Of Rear Axle To Edge Of Counterweight	6.33 ft (1.93 m)
Centerline Of Rear Axle To Hitch	5.50 ft (1.68 m)
Ground Clearance	1.17 ft (0.36 m)
Height - Top Of Exhaust Pipe	11.17 ft (3.40 m)
Height - Top Of Hood	8.83 ft (2.69 m)
Height - Top Of Rops	11.33 ft (3.45 m)
Hinge Pin Height At Carry Height	2.58 ft (0.79 m)
Hinge Pin Height At Maximum Lift	14.83 ft (4.52 m)
Lift Arm Clearance At Maximum Lift	11.92 ft (3.63 m)
Maximum Width - Over Tires - Loaded	9.25 ft (2.82 m)
Note	All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket	24.58 ft (7.49 m)
Rack Back - Carry Height	49 degrees
Rack Back - Maximum Lift	59 degrees
Rack Back At Ground	40 degrees
Tread Width	7.00 ft (2.13 m)
Wheel Base	11.00 ft (3.35 m)

Dimensions - Standard Lift

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Dimensions - Standard Lift specifications
Centerline Of Rear Axle To Edge Of Counterweight	6.33 ft (1.93 m)
Centerline Of Rear Axle To Hitch	5.50 ft (1.68 m)
Ground Clearance	1.17 ft (0.36 m)
Height - Top Of Exhaust Pipe	11.17 ft (3.40 m)
Height - Top Of Hood	8.83 ft (2.69 m)
Height - Top Of Rops	11.33 ft (3.45 m)
Hinge Pin Height At Carry Height	2.08 ft (0.63 m)
Hinge Pin Height At Maximum Lift	13.25 ft (4.04 m)
Lift Arm Clearance At Maximum Lift	10.75 ft (3.28 m)
Maximum Width - Over Tires - Loaded	9.25 ft (2.82 m)
Note	All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket	22.67 ft (6.91 m)
Rack Back - Carry Height	49 degrees
Rack Back - Maximum Lift	59 degrees
Rack Back At Ground	36 degrees
Tread Width	7.00 ft (2.13 m)
Wheel Base	11.00 ft (3.35 m)

Engine

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Engine specifications
Displacement	428.00 cu in (7,013.68 cu cm)
Engine Model	Cat C7.1 ACERT
Maximum Gross Power - 2,100 Rpm - Iso 14396	249.00 hp (185.68 kw)
Maximum Gross Power - 2,100 Rpm - Iso 14396 - Metric	253.00 hp (188.67 kw)
Maximum Gross Power - 2,100 Rpm - Sae J1995	250.00 hp (186.43 kw)
Maximum Net Power - 2,100 Rpm - Iso 9249	230.00 hp (171.51 kw)
Maximum Net Power - 2,100 Rpm - Iso 9249 - Metric	232.00 hp (173.01 kw)
Maximum Net Power - 2,100 Rpm - Sae J1349	230.00 hp (171.51 kw)
Maximum Net Torque - 1,300 Rpm	858.00 lbs ft (1,163.28 nm)
Net Power - Iso 9249	230.00 hp (171.51 kw)
Peak Gross Torque - 1,300 Rpm - Iso 14396	908.00 lbs ft (1,231.07 nm)
Peak Gross Torque - 1,300 Rpm - Sae J1995	911.00 lbs ft (1,235.13 nm)

Hydraulic System

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Hydraulic System specifications
Hydraulic Cycle Time - Total	8.9 s
Implement Pump Type	Variable Axial Piston
Implement System - Maximum Operating Pressure	4250 psi
Implement System - Maximum Pump Output At 2,150 Rpm	76.00 gpm (287.66 lpm)

Operating Specifications

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Operating Specifications specifications
Breakout Force	40,690.00 lbs (18,456.70 kg)
Note (1)	For a machine configuration as defined under ?Weight.?
Note (2)	Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection	25,926.00 lbs (11,759.85 kg)
Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection	24,262.00 lbs (11,005.07 kg)

Operational

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Operational specifications
Operating Weight	42,357.00 lbs (19,212.84 kg)

Service Refill Capacities

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Service Refill Capacities specifications
Cooling System	15.60 gal (59.05 l)
Crankcase	5.80 gal (21.95 l)
Def Tank	4.20 gal (15.90 l)
Differential - Final Drives - Front	11.40 gal (43.15 l)
Differential - Final Drives - Rear	11.40 gal (43.15 l)
Fuel Tank	72.60 gal (274.79 l)
Hydraulic Tank	33.00 gal (124.91 l)
Transmission	11.40 gal (43.15 l)

Sound

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Sound specifications
Note (1)	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)	**European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)	106 LWA**
With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)	69 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008)	108 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013)	75 dB(A)*
With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)	70 dB(A)

Transmission

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Transmission specifications
Forward - 1	4.30 mph (6.92 kph)
Forward - 2	7.50 mph (12.07 kph)
Forward - 3	12.00 mph (19.31 kph)
Forward - 4	16.00 mph (25.75 kph)
Forward - 5	24.50 mph (39.43 kph)
Note	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 1	4.30 mph (6.92 kph)
Reverse - 2	7.50 mph (12.07 kph)
Reverse - 3	16.00 mph (25.75 kph)

Weights

Caterpillar 950M (TIER 4/STAGE IV) (2016) Wheel Loader Weights specifications
Note	Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE.
Operating Weight	42,357.00 lbs (19,212.84 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon