Create a CEG Account  /  CEG Login
☰


Caterpillar 962G II Wheel Loader Specs

General Specifications

Caterpillar 962G II Wheel Loader General Specifications specifications
- Maximum Clamp Opening 116.00 in (2,951.00 mm) - Starting 2006
1st 4.30 mph (6.90 km/h) - Starting 2001
2nd 7.90 mph (12.70 km/h) - Starting 2001
3rd 13.90 mph (22.30 km/h) - Starting 2001
4th 23.00 mph (37.00 km/h) - Starting 2001
A - Tine Length 64.00 in (1,626.00 mm) - Starting 2006
A Height to top of stack 127.00 in (3.22 m) - Starting 2001
Approx. Shipping Wt. 40,889.00 lbs (18,547.00 kg) - Starting 2002
B - Overall Width 95.00 in (2,421.00 mm) - Starting 2006
B Height to top of engine compartment 89.00 in (2.25 m) - Starting 2001
Bore 4.30 in (110.00 mm) - Starting 2001
Breakout Force 31,024.00 lbf (14,072.00 kgf) - Starting 2002
C Height to top of ROPS 133.00 in (3.37 m) - Starting 2001
D - Minimum Opening 25.00 in (638.00 mm) - Starting 2006
D Hinge pin height at carry position 9.00 in (230.00 mm) - Starting 2001
Dump clearance at full lift and - 45° discharge angle 120.00 in (3.04 m) - Starting 2001
Dump Clearance at max. height 110.00 in (2.81 m) - Starting 2002
engine displacement 439.00 cu in (7.20 L) - Starting 2001
Engine Model 3126B DITA - Starting 2001
F Hinge pin height at full lift 164.00 in (4.17 m) - Starting 2001
Flywheel Horsepower 204.00 hp (152.13 kw) - Starting 2002
Flywheel Power: Max. 210.00 hp (157.00 kW) - Starting 2001
Flywheel Power: Net 204.00 hp (152.00 kW) - Starting 2001
Fuel Tank Capacity 78.00 US gal (295.00 L) - Starting 2001
G Maximum overall height 222.00 in (5.64 m) - Starting 2001
Ground Clearance 16.20 in (412.00 mm) - Starting 2002
Ground clearance (std. tires) 16.00 in (400.00 mm) - Starting 2001
Group Number - Linkage Arrangement Coupler - Starting 2006
Group Number - Logging Arrangement 207 - 8505
H Maximum digging depth 3.30 in (85.00 mm) - Starting 2001
Hydraulic Cycle Time (rated load) - Dump 2.2 sec - Starting 2001
Hydraulic Cycle Time (rated load) - Lower (Empty, Float Down) 2.2 sec - Starting 2001
Hydraulic Cycle Time (rated load) - Raise 6.3 sec - Starting 2001
Hydraulic Cycle Time (rated load) - Total 10.7 sec - Starting 2001
Hydraulic System Capacity - (includes tank) 40.40 US gal (153.00 L) - Starting 2001
Hydraulic Tank Capacity 23.20 US gal (88.00 L) - Starting 2001
J Machine center point to axle 66.00 in (1.68 m) - Starting 2001
K Wheelbase 132.00 in (3.35 m) - Starting 2001
L Radius of wheel 32.00 in (820.00 mm) - Starting 2001
M Maximum overall length 324.00 in (8.23 m) - Starting 2001
Maximum Forward Speed 23.00 mph (37.00 km/h) - Starting 2002
Maximum Reverse Speed 24.90 mph (40.00 km/h) - Starting 2002
N Reach at full lift 49.00 in (1.25 m) - Starting 2001
No. Cylinders 6 - Starting 2001
O Maximum rollback at maximum lift 60 deg - Starting 2001
P Maximum rollback at carry height 45 deg - Starting 2001
Product Identification Prefix AXY AXS - Starting 2002
Q Maximum rollback at ground 37.5 deg - Starting 2001
Rated Capacity 4.58 cu yd (3.50 cu m) - Starting 2002
Rated Engine RPM 2200 rpm - Starting 2001
Speeds Reverse - 1st 4.70 mph (7.60 km/h) - Starting 2001
Speeds Reverse - 2nd 8.70 mph (13.90 km/h) - Starting 2001
Speeds Reverse - 3rd 15.30 mph (24.50 km/h) - Starting 2001
Speeds Reverse - 4th Hydraulic Cycle Time, 25.30 mph (40.50 km/h) - Starting 2001
Speeds Reverse - Rated Load in Bucket Seconds - Starting 2001
Stroke 5.00 in (127.00 mm) - Starting 2001
Tires used for measurements 23.5-R25, XHA (L-3 - Starting 2001
Tread Width 84.00 in (2.14 m) - Starting 2001
Tread width (std. tires) 84.00 in (2.14 m) - Starting 2001
Weight, Approximate 5,700.00 lbs (2,585.00 kg) - Starting 2006
Width Over Tires 114.00 in (2.89 m) - Starting 2001
Width over tires (std. tires) 114.00 in (2.89 m) - Starting 2001

Axles

Caterpillar 962G II Wheel Loader Axles specifications
Front Fixed front
Maximum Single-Wheel Rise And Fall 18.50 in (46.99 cm)
Rear Ocillating +/-13?

Brakes

Caterpillar 962G II Wheel Loader Brakes specifications
Brakes Meets required standards.

Buckets

Caterpillar 962G II Wheel Loader Buckets specifications
Bucket Capacities 2.9-3.8 m3 3.75-5.0 yd3
Maximum Bucket Capacity 5 cu yd

Cab

Caterpillar 962G II Wheel Loader Cab specifications
Rops/Fops Meets SAE and ISO standards.

Dimensions

Caterpillar 962G II Wheel Loader Dimensions specifications
Height 11.17 ft (3.40 m)
Length 26.25 ft (8.00 m)
Weight 41,008.00 lbs (18,600.94 kg)
Width 9.50 ft (2.90 m)

Engine

Caterpillar 962G II Wheel Loader Engine specifications
Bore 4.30 in (10.92 cm)
Displacement 439.00 cu in (7,193.94 cu cm)
Engine Model Caterpillar 3126B with ATAAC
Flywheel Power 204.00 hp (152.13 kw)
Maximum Flywheel Power 210.00 hp (156.60 kw)
Peak Torque - 1,400 Rpm - Net 669.00 lbs ft (907.03 nm)
Stroke 5.00 in (12.70 cm)
Total Torque Rise 38 %

Hydraulic System

Caterpillar 962G II Wheel Loader Hydraulic System specifications
Bucket/Work Tool System - Relief Valve Setting 3000 psi
Hydraulic Cycle Time - Dump 2.1 s
Hydraulic Cycle Time - Lower, Empty, Float Down 3 s
Hydraulic Cycle Time - Raise 6.3 s
Hydraulic Cycle Time - Total 11.4 s
Pilot System - Main Valve Setting - Command Control System 500 psi
Pilot System - Main Valve Setting - Steering Wheel 375 psi
Pilot System - Pump Output 8.90 gpm (33.69 lpm)

Operating Specifications

Caterpillar 962G II Wheel Loader Operating Specifications specifications
Breakout Force 31,024.00 lbs (14,072.27 kg)
Static Tipping Load - Full Turn 26,380.00 lbs (11,965.78 kg)

Operational

Caterpillar 962G II Wheel Loader Operational specifications
Operating Weight 40,889.00 lbs (18,546.96 kg)

Service Refill Capacities

Caterpillar 962G II Wheel Loader Service Refill Capacities specifications
Cooling System 14.50 gal (54.88 l)
Crankcase 8.00 gal (30.28 l)
Differential - Final Drives - Front 9.50 gal (35.96 l)
Differential - Final Drives - Rear 9.50 gal (35.96 l)
Fuel Tank - Standard 75.30 gal (285.01 l)
Hydraulic System - Including Tank 40.00 gal (151.40 l)
Hydraulic Tank 23.00 gal (87.06 l)
Transmission 9.00 gal (34.07 l)

Tires

Caterpillar 962G II Wheel Loader Tires specifications
Tires Choose from a variety of tires to match your application.

Transmission

Caterpillar 962G II Wheel Loader Transmission specifications
Forward - 1 4.30 mph (6.92 kph)
Forward - 2 7.90 mph (12.71 kph)
Forward - 3 13.90 mph (22.37 kph)
Forward - 4 23.00 mph (37.01 kph)
Reverse - 1 4.70 mph (7.56 kph)
Reverse - 2 8.60 mph (13.84 kph)
Reverse - 3 15.20 mph (24.46 kph)
Reverse - 4 24.90 mph (40.07 kph)

Weights

Caterpillar 962G II Wheel Loader Weights specifications
Operating Weight 40,889.00 lbs (18,546.96 kg)
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.