Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 962M is a medium wheel loader designed for material handling, stockpiling, truck loading, and general construction applications. Part of Caterpillar's M Series, the 962M features a fuel-efficient engine, advanced hydraulic system, and operator-focused cab layout. It is commonly used in aggregate yards, construction sites, waste handling, and industrial material movement. The machine is built for productivity, durability, and serviceability, with integrated technology options that support load management and machine monitoring. The Caterpillar 962M wheel loader is available with multiple bucket and attachment configurations to suit a range of jobsite requirements and material types.
| - Maximum Clamp Opening | 123.00 in (3,123.00 mm) - Starting 2017 |
|---|---|
| 1 Fork tine length | 96.00 in (2,438.00 mm) - Starting 2016 |
| 10 Overall height of fork at full lift - (top of carriage to ground) | 200.00 in (5,081.00 mm) - Starting 2016 |
| 11 Clearance at full lift and maximum dump | 70.60 in (1,794.00 mm) - Starting 2016 |
| 12 Maximum discharge angle - from horizontal | 52 deg - Starting 2016 |
| 13 Carriage width | 99.50 in (2,528.00 mm) - Starting 2016 |
| 14 Carriage height | 44.50 in (1,130.00 mm) - Starting 2016 |
| 15 Outside tine width (maximum spread) | 85.70 in (2,178.00 mm) - Starting 2016 |
| 16 Outside tine width (minimum spread) | 22.70 in (576.00 mm) - Starting 2016 |
| 1st | 6.9 4.3 - Starting 2015 |
| 2 Load center | 48.00 in (1,219.00 mm) - Starting 2016 |
| 2nd | 12.0 7.5 - Starting 2015 |
| 3 Maximum overall length | 396.00 in (10,058.00 mm) - Starting 2016 |
| 3rd | 25.7 16.0 - Starting 2015 |
| 4 Reach with forks at ground level | 51.80 in (1,317.00 mm) - Starting 2016 |
| 4th | 25.7 16.0 - Starting 2015 |
| 5 Ground to top of tine at minimum - height and fork level | 1.00 in (24.00 mm) - Starting 2016 |
| 5th Speeds Reverse | 24.50 mph (39.50 km/h) - Starting 2016 |
| 6 Reach with arms horizontal - and forks level | 72.30 in (1,836.00 mm) - Starting 2016 |
| 7 Reach with fork at maximum height | 37.70 in (957.00 mm) - Starting 2016 |
| 8 Ground to top of tine with arms - horizontal and fork level | 74.40 in (1,889.00 mm) - Starting 2016 |
| 9 Ground to top of tine at maximum - height and fork level | 159.10 in (4,041.00 mm) - Starting 2016 |
| A - Tine Length | 36.00 in (917.00 mm) - Starting 2017 |
| A Height to top of exhaust pipe | 135.00 in (3,424.00 mm) - Starting 2015 |
| B - Overall Width | 73.00 in (1,850.00 mm) - Starting 2017 |
| B Height to top of engine compartment | 106.00 in (2,694.00 mm) - Starting 2015 |
| Based on 2438 mm (96") carriage, Fusion coupler and | with a pallet fork is deter- - Starting 2016 |
| Bore | 4.10 in (105.00 mm) - Starting 2015 |
| Breakout force | 37,233.00 lbf (165.00 kN) - Starting 2017 |
| Bucket Capacity | 3.3 - 12.0 (2.5 - 9.2) - Starting 2019 |
| C Height to top of ROPS | 136.00 in (3,443.00 mm) - Starting 2015 |
| Capacity - 110% | 6.04 cu yd (4.62 cu m) - Starting 2017 |
| Capacity - rated | 5.49 cu yd (4.20 cu m) - Starting 2017 |
| configuration: L3 Michelin XHA tires, air conditioning, | · CEN EN 474-3: 60 % - Starting 2016 |
| D - Minimum Opening | 57.00 in (1,450.00 mm) - Starting 2017 |
| D Hinge pin height at carry position | 27.00 in (690.00 mm) - Starting 2015 |
| DEF Tank Capacity | 4.20 US gal (16.00 L) - Starting 2017 |
| Digging depth | 0.00 in (6.00 mm) - Starting 2015 |
| engine displacement | 427.8 in3 mph (7.01 L km/h) - Starting 2015 |
| Dump clearance at full lift and - 45° discharge angle | 120.00 in (3,055.00 mm) - Starting 2015 |
| Dump clearance at full lift and - F Hinge pin height at full lift | 166.00 in (4,237.00 mm) - Starting 2015 |
| Dump clearance at maximum lift and 45° discharge | 115.00 in (2,929.00 mm) - Starting 2017 |
| Emission Standards | Tier 3 equivalent - Starting 2017 |
| Engine Model | C7.1 ACERT - Starting 2015 |
| Engine Power | 250.00 hp (186.43 kw) - Starting 2019 |
| Engine type | Cat C7.1 - Starting 2021 |
| Fuel Tank Capacity | 72.60 US gal (275.00 L) - Starting 2017 |
| G Maximum overall height | 228.00 in (5,787.00 mm) - Starting 2015 |
| Ground Clearance | 15.00 in (385.00 mm) - Starting 2015 |
| Ground clearance (std. tires) | 15.00 in (385.00 mm) - Starting 2015 |
| Group Number - Logging Arrangement | 352 - 7339 |
| H Maximum digging depth | 3.50 in (88.00 mm) - Starting 2015 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Dump | 1.5 sec - Starting 2015 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Dump (at Maximum Raise) | 1.5 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Lower (Empty, Float Down) | 2.7 sec - Starting 2015 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Raise | 5.2 sec - Starting 2015 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Raise (from Carry Position) | 5.4 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Total | 9.6 sec - Starting 2017 |
| Hydraulic Tank Capacity | 33.00 US gal (125.00 L) - Starting 2015 |
| J Machine center point to axle | 66.00 in (1,675.00 mm) - Starting 2015 |
| K Wheel base | 132.00 in (3,350.00 mm) - Starting 2015 |
| L Radius of tire | 29.00 in (746.00 mm) - Starting 2015 |
| Loader clearance circle with bucket at carry position | 554.00 in (14,049.00 mm) - Starting 2017 |
| M Maximum overall length | 338.00 in (8,574.00 mm) - Starting 2015 |
| Machine and work tool availability varies by region. | for product availability. - Starting 2016 |
| Max Dump Height | 10.00 ft (3.05 m) - Starting 2019 |
| Maximum Engine: Gross | 262.00 hp (196.00 kW) - Starting 2017 |
| Maximum Engine: Net | 248.00 hp (185.00 kW) - Starting 2017 |
| Maximum Net Power Engine RPM | 2000 rpm - Starting 2017 |
| N Reach at full lift | 54.00 in (1,392.00 mm) - Starting 2015 |
| Net Power | 250.00 hp (186.43 kw) - Starting 2021 |
| No. Cylinders | 6 - Starting 2015 |
| O Maximum rollback at maximum lift | 55 deg - Starting 2015 |
| Operating Weight | 44,491.00 lbs (20,180.80 kg) - Starting 2021 |
| Operating weight* | 46,469.00 lbs (21,084.00 kg) - Starting 2018 |
| Overall height with bucket at maximum lift | 236.00 in (5,984.00 mm) - Starting 2017 |
| Overall length | 346.00 in (8,779.00 mm) - Starting 2017 |
| P Maximum rollback at carry height | 51 deg - Starting 2015 |
| Q Maximum rollback at ground | 46 deg - Starting 2015 |
| Rated load (CEN EN 474-3 firm - and level ground) | 13,226.00 lbs (6,001.00 kg) - Starting 2016 |
| Rated load (CEN EN 474-3 rough terrain) | 9,919.00 lbs (4,501.00 kg) - Starting 2016 |
| Rated load (SAE J1197) | 8,266.00 lbs (3,751.00 kg) - Starting 2016 |
| Rated load is determined by considering % of machine | dealer to properly select - Starting 2016 |
| Reach at level lift arm and bucket level | 118.00 in (3,001.00 mm) - Starting 2017 |
| Reach at maximum lift and 45° discharge | 58.00 in (1,496.00 mm) - Starting 2017 |
| SAE J732, CEN EN 474-3. | Automotive Engineers Committee for Standardization - Starting 2016 |
| Specifications and ratings conform to the following | on firm and level ground - Starting 2016 |
| Static tipping load, articulated (no tire deflection) | 28,709.00 lbs (13,026.00 kg) - Starting 2017 |
| Static tipping load, articulated (no tire deflection)* | 28,709.00 lbs (13,026.00 kg) - Starting 2018 |
| Static tipping load, articulated (with tire deflection) | 26,823.00 lbs (12,170.00 kg) - Starting 2017 |
| Static tipping load, articulated (with tire deflection)* | 26,823.00 lbs (12,170.00 kg) - Starting 2018 |
| Static tipping load, straight (no tire deflection) | 33,372.00 lbs (15,141.00 kg) - Starting 2017 |
| Static tipping load, straight (no tire deflection)* | 33,372.00 lbs (15,141.00 kg) - Starting 2018 |
| Static tipping load, straight (with tire deflection) | 31,548.00 lbs (14,314.00 kg) - Starting 2017 |
| Static tipping load, straight (with tire deflection)* | 31,548.00 lbs (14,314.00 kg) - Starting 2018 |
| Static tipping loads and operating weight are based on | hydraulic limit. - Starting 2016 |
| Stroke | 5.30 in (135.00 mm) - Starting 2015 |
| the machine configuration for handling target | application. - Starting 2016 |
| Tine capacity | 24,905.00 lbs (11,300.00 kg) - Starting 2016 |
| Tine thickness | 3.50 in (90.00 mm) - Starting 2016 |
| Tine width (single tine) | 7.10 in (180.00 mm) - Starting 2016 |
| Tip Load | 29,877 13,552) - Starting 2021 |
| Tipping load - forks level articulated | 16,532.00 lbs (7,501.00 kg) - Starting 2016 |
| Tipping load - forks level straight | 19,350.00 lbs (8,780.00 kg) - Starting 2016 |
| Tires used for measurements | L3 Michelin XHA2 - Starting 2015 |
| train guard, full fluids, fuel tank, coolant, lubricants, | hydraulic limit. - Starting 2016 |
| Travel Speed(Fwd/Rev) | 24.9 / 16.0 mph - Starting 2021 |
| Tread Width | 84.00 in (2,140.00 mm) - Starting 2015 |
| Tread width (std. tires) | 84.00 in (2,140.00 mm) - Starting 2015 |
| Weight, Approximate | 4,727.00 lbs (2,144.00 kg) - Starting 2017 |
| Width | 117.00 in (2,994.00 mm) - Starting 2015 |
| Width Over Tires | 110.00 in (2,790.00 mm) - Starting 2015 |
| Width over tires (std. tires) | 110.00 in (2,790.00 mm) - Starting 2015 |
| Front | Fixed |
|---|---|
| Maximum Single-Wheel Rise And Fall | 19.20 in (48.77 cm) |
| Rear | Oscillating ?13 degrees |
| Brakes | Brakes meet ISO 3450 standards |
|---|
| Bucket Range | 2.5-9.2 m (3.3-12.0 yd) |
|---|
| Bucket Capacities | 2.5-9.2 m? (3.3-12.0 yd?) |
|---|
| Rops/Fops | ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards |
|---|
| Centerline Of Rear Axle To Edge Of Counterweight | 85.00 in (215.90 cm) |
|---|---|
| Centerline Of Rear Axle To Hitch | 66.00 in (167.64 cm) |
| Ground Clearance | 1.17 ft (0.36 m) |
| Height | 11.25 ft (3.43 m) |
| Height - Top Of Exhaust Pipe | 134.00 in (340.36 cm) |
| Height - Top Of Hood | 106.00 in (269.24 cm) |
| Height - Top Of Rops | 11.34 ft (3.46 m) |
| Hinge Pin Height At Carry Height | 26.00 in (66.04 cm) |
| Hinge Pin Height At Maximum Lift | 167.00 in (424.18 cm) |
| Length | 28.17 ft (8.59 m) |
| Lift Arm Clearance At Maximum Lift | 136.00 in (345.44 cm) |
| Maximum Width Over Tires (Loaded) | 111.00 in (281.94 cm) |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length (Without Bucket) | 285.00 in (723.90 cm) |
| Tread Width | 84.00 in (213.36 cm) |
| Weight | 44,951.00 lbs (20,389.46 kg) |
| Wheel Base | 11.00 ft (3.35 m) |
| Width | 9.17 ft (2.79 m) |
| Centerline Of Rear Axle To Edge Of Counterweight | 7.08 ft (2.16 m) |
|---|---|
| Centerline Of Rear Axle To Hitch | 5.50 ft (1.68 m) |
| Ground Clearance | 1.17 ft (0.36 m) |
| Height - Top Of Exhaust Pipe | 11.17 ft (3.40 m) |
| Height - Top Of Hood | 8.83 ft (2.69 m) |
| Height - Top Of Rops | 11.33 ft (3.45 m) |
| Hinge Pin Height At Carry Height | 2.58 ft (0.79 m) |
| Hinge Pin Height At Maximum Lift | 14.83 ft (4.52 m) |
| Lift Arm Clearance At Maximum Lift | 11.83 ft (3.61 m) |
| Maximum Width - Over Tires - Loaded | 9.25 ft (2.82 m) |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket | 23.75 ft (7.24 m) |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back At Ground | 37 degrees |
| Tread Width | 7.00 ft (2.13 m) |
| Wheel Base | 11.00 ft (3.35 m) |
| Centerline Of Rear Axle To Edge Of Counterweight | 7.08 ft (2.16 m) |
|---|---|
| Centerline Of Rear Axle To Hitch | 5.50 ft (1.68 m) |
| Ground Clearance | 1.17 ft (0.36 m) |
| Height - Top Of Exhaust Pipe | 11.17 ft (3.40 m) |
| Height - Top Of Hood | 8.83 ft (2.69 m) |
| Height - Top Of Rops | 11.33 ft (3.45 m) |
| Hinge Pin Height At Carry Height | 2.17 ft (0.66 m) |
| Hinge Pin Height At Maximum Lift | 13.92 ft (4.24 m) |
| Lift Arm Clearance At Maximum Lift | 11.33 ft (3.45 m) |
| Maximum Width - Over Tires - Loaded | 9.25 ft (2.82 m) |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket | 23.75 ft (7.24 m) |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back At Ground | 37 degrees |
| Tread Width | 7.00 ft (2.13 m) |
| Wheel Base | 11.00 ft (3.35 m) |
| Bore | 4.20 in (10.67 cm) |
|---|---|
| Displacement | 428.00 cu in (7,013.68 cu cm) |
| Engine Model | Cat? C7.1 ACERT? |
| Maximum Gross Power - 2,100 Rpm - Sae J1995 | 271.00 hp (202.09 kw) |
| Maximum Gross Power - Sae J1995 | 271.00 hp (202.09 kw) |
| Maximum Net Power - 2,000 Rpm - Iso 9249 | 248.00 hp (184.94 kw) |
| Maximum Net Power - 2,000 Rpm - Iso 9249 - Metric | 252.00 hp (187.92 kw) |
| Maximum Net Power - 2,000 Rpm - Sae J1349 | 248.00 hp (184.94 kw) |
| Maximum Net Power - 2,100 Rpm - Iso 9249 | 250.00 hp (186.43 kw) |
| Maximum Net Power - 2,100 Rpm - Iso 9249 - Metric | 253.00 hp (188.67 kw) |
| Maximum Net Power - 2,100 Rpm - Sae J1349 | 250.00 hp (186.43 kw) |
| Maximum Net Power - Sae J1349 | 250.00 hp (186.43 kw) |
| Maximum Net Torque - 1,350 Rpm | 865.00 lbs ft (1,172.77 nm) |
| Maximum Net Torque - 1,350 Rpm - Sae J1349 | 865.00 lbs ft (1,172.77 nm) |
| Maximum Net Torque - 1,400 Rpm | 726.00 lbs ft (984.31 nm) |
| Maximum Power - 2,000 Rpm - Iso 14396 | 261.00 hp (194.63 kw) |
| Maximum Power - 2,000 Rpm - Iso 14396 - Metric | 265.00 hp (197.61 kw) |
| Maximum Power - 2,000 Rpm - Sae J1995 | 263.00 hp (196.12 kw) |
| Maximum Power - 2,100 Rpm - Iso 14396 | 269.00 hp (200.60 kw) |
| Maximum Power - 2,100 Rpm - Iso 14396 - Metric | 273.00 hp (203.58 kw) |
| Maximum Power - 2,100 Rpm - Sae J1995 | 271.00 hp (202.09 kw) |
| Net Power - Iso 9249 | 250.00 hp (186.43 kw) |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
| Peak Gross Torque - 1,350 Rpm - Iso 14396 | 918.00 lbs ft (1,244.62 nm) |
| Peak Gross Torque - 1,350 Rpm - Sae J1995 | 921.00 lbs ft (1,248.69 nm) |
| Peak Gross Torque - 1,400 Rpm - Iso 14396 | 774.00 lbs ft (1,049.39 nm) |
| Peak Gross Torque - 1,400 Rpm - Sae J1995 | 777.00 lbs ft (1,053.46 nm) |
| Stroke | 5.40 in (13.72 cm) |
| Emissions | Tier 3/Stage IIIA |
|---|
| Emissions | Tier 4/Stage IV |
|---|
| Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise | 1.5 s |
|---|---|
| Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down | 2.7 s |
| Hydraulic Cycle Time - Rated Payload - Raise From Carry Position | 5.2 s |
| Hydraulic Cycle Time - Rated Payload - Total | 9.4 s |
| Hydraulic Cycle Time - Total | 8.9 s |
| Implement Pump Type | Variable axial piston |
| Implement System - Maximum Operating Pressure | 4250 psi |
| Implement System - Maximum Pump Output At 2,150 Rpm | 76.00 gpm (287.66 lpm) |
| Implement System - Optional 3rd Function Maximum Flow | 63.00 gpm (238.46 lpm) |
| Implement System - Optional 3rd Function Maximum Pressure | 3220 psi |
| Breakout Force | 42,489.00 lbs (19,272.71 kg) |
|---|---|
| Note (1) | For a machine configuration as defined under ?Weight.? |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection | 27,494.00 lbs (12,471.08 kg) |
| Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection | 25,814.00 lbs (11,709.05 kg) |
| Operating Weight | 44,593.00 lbs (20,227.07 kg) |
|---|
| Cooling System | 15.60 gal (59.05 l) |
|---|---|
| Crankcase | 5.80 gal (21.95 l) |
| Def Tank | 4.20 gal (15.90 l) |
| Def Tank* | 4.20 gal (15.90 l) |
| Differential - Final Drives - Front | 11.40 gal (43.15 l) |
| Differential - Final Drives - Rear | 11.40 gal (43.15 l) |
| Fuel Tank | 72.60 gal (274.79 l) |
| Hydraulic Tank | 33.00 gal (124.91 l) |
| Note | *Must meet the requirements outlined in ISO 22241-1. |
| Transmission | 11.40 gal (43.15 l) |
| Exterior Sound Power Level - Iso 6395:2008 | 108 dB(A) |
|---|---|
| Exterior Sound Pressure Level - Sae J88:2013 | 75 dB(A) |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (2) | **For machines in European Union countries and in countries that adopt the ?EU Directives.? |
| Note (3) | ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
| Operator Sound Pressure Level - Iso 6396:2008 | 70 dB(A) |
| With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)** | 104 LWA*** |
| With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)** | 69 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008) | 107 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013) | 75 dB(A)* |
| With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008) | 70 dB(A) |
| Forward - 1 | 4.30 mph (6.92 kph) |
|---|---|
| Forward - 2 | 7.50 mph (12.07 kph) |
| Forward - 3 | 12.00 mph (19.31 kph) |
| Forward - 4 | 16.00 mph (25.75 kph) |
| Forward - 5 | 24.90 mph (40.07 kph) |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Reverse - 1 | 4.30 mph (6.92 kph) |
| Reverse - 2 | 7.50 mph (12.07 kph) |
| Reverse - 3 | 16.00 mph (25.75 kph) |
| Note | Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.3 m3 (4.3 yd3) general purpose bucket with BOCE. |
|---|---|
| Operating Weight | 44,591.00 lbs (20,226.16 kg) |