Create a CEG Account  /  CEG Login
☰


Caterpillar 966M Wheel Loader Specs

The Caterpillar 966M is a medium-size wheel loader designed for material handling, aggregate, construction, and loading applications. It is part of Caterpillar's M Series wheel loader lineup and is commonly used in quarries, stockpiles, roadbuilding, and general earthmoving. The 966M features a Cat diesel engine, hydrostatic or powertrain configuration depending on market specification, and a loader linkage system built for efficient bucket fill and load-and-carry cycles. Operator comfort, visibility, and service access are key design elements. The 966M is typically paired with general-purpose, rock, or material-handling buckets and supports a range of work tools.


General Specifications

Caterpillar 966M Wheel Loader General Specifications specifications
- Maximum Clamp Opening 115.00 in (2,923.00 mm) - Starting 2017
1 Fork tine length 96.00 in (2,438.00 mm) - Starting 2016
10 Overall height of fork at full lift - (top of carriage to ground) 200.00 in (5,079.00 mm) - Starting 2016
11 Clearance at full lift and maximum dump 71.60 in (1,818.00 mm) - Starting 2016
12 Maximum discharge angle - from horizontal 51 deg - Starting 2016
13 Carriage width 99.50 in (2,528.00 mm) - Starting 2016
14 Carriage height 44.50 in (1,130.00 mm) - Starting 2016
15 Outside tine width (maximum spread) 85.70 in (2,178.00 mm) - Starting 2016
16 Outside tine width (minimum spread) 22.70 in (576.00 mm) - Starting 2016
1st 7.1 4.4 - Starting 2015
2 Load center 48.00 in (1,219.00 mm) - Starting 2016
2nd 14.4 8.9 - Starting 2015
3 Maximum overall length 399.20 in (10,140.00 mm) - Starting 2016
3rd 25.9 16.1 - Starting 2015
4 Reach with forks at ground level 43.50 in (1,106.00 mm) - Starting 2016
4th 39.0 24.2 - Starting 2015
5 Ground to top of tine at minimum - height and fork level -0.50 in (-11.00 mm) - Starting 2016
5th Speeds Reverse - km/h mph - Starting 2015
6 Reach with arms horizontal - and forks level 67.10 in (1,704.00 mm) - Starting 2016
7 Reach with fork at maximum height 32.90 in (836.00 mm) - Starting 2016
8 Ground to top of tine with arms - horizontal and fork level 77.00 in (1,955.00 mm) - Starting 2016
9 Ground to top of tine at maximum - height and fork level 159.00 in (4,039.00 mm) - Starting 2016
A - Tine Length 64.00 in (1,618.00 mm) - Starting 2017
A Height to top of exhaust pipe 139.00 in (3,522.00 mm) - Starting 2015
B - Overall Width 96.00 in (2,419.00 mm) - Starting 2017
B Height to top of engine compartment 111.00 in (2,818.00 mm) - Starting 2015
Based on 2438 mm (96") carriage, Fusion coupler and with a pallet fork is deter- - Starting 2016
Bore 4.53 in (115.00 mm) - Starting 2015
Breakout force 42,297.00 lbf (188.00 kN) - Starting 2015
Bucket Capacity 4.19 - 9.68 (3.2 - 7.4) - Starting 2021
Bucket Weight 4,332.00-4,721.00 lbs (1,965.00-2,143.00 kg)
Bucket Width 126.00 in (3,201.00 mm) - Starting 2016
C Height to top of ROPS 140.00 in (3,559.00 mm) - Starting 2015
Capacity - rated 5.30 cu yd (4.04 cu m) - Starting 2015
Capacity - rated at 110% fill factor 5.81 cu yd (4.44 cu m) - Starting 2015
configuration: L3 Michelin XHA tires, air conditioning, · CEN EN 474-3: 60 % - Starting 2016
D - Minimum Opening 26.00 in (656.00 mm) - Starting 2017
D Hinge pin height at carry position 25.00 in (630.00 mm) - Starting 2015
DEF Tank Capacity 4.40 US gal (16.80 L) - Starting 2015
Digging depth 3.40 in (86.00 mm) - Starting 2015
engine displacement 568 in3 mph (9.3 L km/h) - Starting 2015
Dump clearance at full lift and - 45° discharge angle 117.00 in (2,991.00 mm) - Starting 2015
Dump clearance at full lift and - F Hinge pin height at full lift 167.00 in (4,235.00 mm) - Starting 2015
Dump clearance at maximum lift and 45° discharge 22.00 in (559.00 mm) - Starting 2016
Emission Standards Tier 2 equivalent or Tier 3 equivalent - Starting 2017
Engine Model C9.3 ACERT - Starting 2015
Engine Power 276.00 hp (205.82 kw) - Starting 2019
Engine type Cat C9.3 - Starting 2021
Fuel Tank Capacity 80.00 US gal (303.00 L) - Starting 2017
G Maximum overall height 233.00 in (5,902.00 mm) - Starting 2015
Ground Clearance 19.00 in (476.00 mm) - Starting 2015
Ground clearance (std. tires) 19.00 in (476.00 mm) - Starting 2015
Group Number - Logging Arrangement 253 - 7320
H Maximum digging depth 5.00 in (124.00 mm) - Starting 2015
Hydraulic Cycle Time, - Rated Load in Bucket - Dump 1.4 sec - Starting 2015
Hydraulic Cycle Time, - Rated Load in Bucket - Dump (at Maximum Raise) 1.4 sec - Starting 2017
Hydraulic Cycle Time, - Rated Load in Bucket - Lower (Empty, Float Down) 2.6 sec - Starting 2017
Hydraulic Cycle Time, - Rated Load in Bucket - Raise 6.1 sec - Starting 2015
Hydraulic Cycle Time, - Rated Load in Bucket - Raise (from Carry Position) 5.5 sec - Starting 2017
Hydraulic Cycle Time, - Rated Load in Bucket - Total 9.5 sec - Starting 2017
Hydraulic Tank Capacity 33.00 US gal (125.00 L) - Starting 2015
J Machine center point to axle 70.00 in (1,775.00 mm) - Starting 2015
K Wheel base 140.00 in (3,550.00 mm) - Starting 2015
L Radius of tire 31.00 in (799.00 mm) - Starting 2015
Loader clearance circle with bucket at carry position 19.00 in (493.00 mm) - Starting 2016
M Maximum overall length 345.00 in (8,750.00 mm) - Starting 2015
Machine and work tool availability varies by region. for product availability. - Starting 2016
Max Dump Height 9.80 ft (2.99 m) - Starting 2019
Maximum Engine: Gross 308.00 hp (230.00 kW) - Starting 2017
Maximum Engine: Net 278.00 hp (207.00 kW) - Starting 2017
Maximum Net Power Engine RPM 1700 rpm - Starting 2015
N Reach at full lift 53.00 in (1,353.00 mm) - Starting 2015
Net Power 311.00 hp (231.92 kw) - Starting 2021
No. Cylinders 6 - Starting 2015
O Maximum rollback at maximum lift 62 deg - Starting 2015
Operating Weight 51,176.00 lbs (23,213.07 kg) - Starting 2019
Operating weight* 51,114.00 lbs (23,192.00 kg) - Starting 2018
Overall height with bucket at maximum lift 233.00 in (5,901.00 mm) - Starting 2015
P Maximum rollback at carry height 50 deg - Starting 2015
Q Maximum rollback at ground 42 deg - Starting 2015
Rated load (CEN EN 474-3 firm - and level ground) 13,712.00 lbs (6,222.00 kg) - Starting 2016
Rated load (CEN EN 474-3 rough terrain) 12,014.00 lbs (5,451.00 kg) - Starting 2016
Rated load (SAE J1197) 10,011.00 lbs (4,542.00 kg) - Starting 2016
Rated load is determined by considering % of machine dealer to properly select - Starting 2016
Reach at level lift arm and bucket level 117.00 in (2,978.00 mm) - Starting 2015
Reach at maximum lift and 45° discharge 54.00 in (1,372.00 mm) - Starting 2015
SAE J732, CEN EN 474-3. Automotive Engineers Committee for Standardization - Starting 2016
Shipping length (With Bucket) 32.00 in (822.00 mm) - Starting 2016
Specifications and ratings conform to the following on firm and level ground - Starting 2016
Static tipping load, articulated (No Tire Deflection) 35,006.00 lbs (15,883.00 kg) - Starting 2016
Static tipping load, articulated (no tire deflection)* 35,006.00 lbs (15,883.00 kg) - Starting 2018
Static tipping load, articulated (With Tire Deflection) 32,483.00 lbs (14,738.00 kg) - Starting 2016
Static tipping load, articulated (with tire deflection)* 32,483.00 lbs (14,738.00 kg) - Starting 2018
Static tipping load, straight (No Tire Deflection) 39,430.00 lbs (17,890.00 kg) - Starting 2016
Static tipping load, straight (no tire deflection)* 39,430.00 lbs (17,890.00 kg) - Starting 2018
Static tipping load, straight (With Tire Deflection) 36,871.00 lbs (16,729.00 kg) - Starting 2016
Static tipping load, straight (with tire deflection)* 36,871.00 lbs (16,729.00 kg) - Starting 2018
Static tipping loads and operating weight are based on hydraulic limit. - Starting 2016
Stroke 5.87 in (149.00 mm) - Starting 2015
the machine configuration for handling target application. - Starting 2016
Tine capacity 24,905.00 lbs (11,300.00 kg) - Starting 2016
Tine thickness 3.50 in (90.00 mm) - Starting 2016
Tine width (single tine) 7.10 in (180.00 mm) - Starting 2016
Tip Load 36,711.00 lbs (16,651.85 kg) - Starting 2021
Tipping load - forks level articulated 20,023.00 lbs (9,085.00 kg) - Starting 2016
Tipping load - forks level straight 22,723.00 lbs (10,310.00 kg) - Starting 2016
Tires used for measurements L3 Michelin XHA2 - Starting 2015
train guard, full fluids, fuel tank, coolant, lubricants, hydraulic limit. - Starting 2016
Travel Speed(Fwd/Rev) 24.9 / 24.9 mph - Starting 2021
Tread Width 88.00 in (2,230.00 mm) - Starting 2015
Tread width (std. tires) 88.00 in (2,230.00 mm) - Starting 2015
Weight, Approximate 5,913.00 lbs (2,683.00 kg) - Starting 2017
Width 128.00 in (3,271.00 mm) - Starting 2015
Width Over Tires 118.00 in (2,991.00 mm) - Starting 2015
Width over tires (std. tires) 118.00 in (2,991.00 mm) - Starting 2015

Axles

Caterpillar 966M Wheel Loader Axles specifications
Front Fixed
Maximum Single-Wheel Rise And Fall 19.50 in (49.53 cm)
Rear Oscillating ?13 degrees

Brakes

Caterpillar 966M Wheel Loader Brakes specifications
Brakes Brakes meet ISO 3450 standards

Bucket Capacities

Caterpillar 966M Wheel Loader Bucket Capacities specifications
Bucket Range 3.20-7.40 m (4.19-9.68 yd)

Buckets

Caterpillar 966M Wheel Loader Buckets specifications
Bucket Capacities 2.5-9.2 m? (3.25-12.0 yd?)

Cab

Caterpillar 966M Wheel Loader Cab specifications
Rops/Fops ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards

Dimensions

Caterpillar 966M Wheel Loader Dimensions specifications
Height 11.67 ft (3.56 m)
Length 28.75 ft (8.76 m)
Weight 51,176.00 lbs (23,213.07 kg)
Width 9.83 ft (3.00 m)

Dimensions - High Lift

Caterpillar 966M Wheel Loader Dimensions - High Lift specifications
Centerline Of Rear Axle To Edge Of Counterweight 8.17 ft (2.49 m)
Centerline Of Rear Axle To Hitch 5.83 ft (1.78 m)
Ground Clearance 1.42 ft (0.43 m)
Height - Top Of Exhaust Pipe 11.58 ft (3.53 m)
Height - Top Of Hood 9.25 ft (2.82 m)
Height - Top Of Rops 11.75 ft (3.58 m)
Hinge Pin Height At Carry 2.58 ft (0.79 m)
Hinge Pin Height At Maximum Lift 15.75 ft (4.80 m)
Lift Arm Clearance At Maximum Lift 13.58 ft (4.14 m)
Maximum Width Over Tires 9.83 ft (3.00 m)
Note All dimensions are approximate and based on L3 XHA2 tires.
Overall Length - Without Bucket 26.58 ft (8.10 m)
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 71 degrees
Rack Back At Ground 39 degrees
Tread Width 7.33 ft (2.23 m)
Wheel Base 11.67 ft (3.56 m)

Dimensions - Standard Lift

Caterpillar 966M Wheel Loader Dimensions - Standard Lift specifications
Centerline Of Rear Axle To Edge Of Counterweight 7.17 ft (2.19 m)
Centerline Of Rear Axle To Hitch 5.83 ft (1.78 m)
Ground Clearance 1.42 ft (0.43 m)
Height - Top Of Exhaust Pipe 11.58 ft (3.53 m)
Height - Top Of Hood 9.25 ft (2.82 m)
Height - Top Of Rops 11.75 ft (3.58 m)
Hinge Pin Height At Carry 2.08 ft (0.63 m)
Hinge Pin Height At Maximum Lift 13.92 ft (4.24 m)
Lift Arm Clearance At Maximum Lift 11.92 ft (3.63 m)
Maximum Width Over Tires 9.83 ft (3.00 m)
Note All dimensions are approximate and based on L3 XHA2 tires.
Overall Length - Without Bucket 23.92 ft (7.29 m)
Rack Back - Carry Height 50 degrees
Rack Back - Maximum Lift 62 degrees
Rack Back At Ground 42 degrees
Tread Width 7.33 ft (2.23 m)
Wheel Base 11.67 ft (3.56 m)

Engine

Caterpillar 966M Wheel Loader Engine specifications
Bore 4.60 in (11.68 cm)
Displacement 568.00 cu in (9,307.87 cu cm)
Engine Model Cat? C9.3 ACERT?
Maximum Gross Power - 1,800 Rpm - Sae J1995 311.00 hp (231.92 kw)
Maximum Gross Power - Sae J1995 311.00 hp (231.92 kw)
Maximum Net Power - 1,700 Rpm - Iso 9249 276.00 hp (205.82 kw)
Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric 280.00 hp (208.80 kw)
Maximum Net Power - 1,700 Rpm - Sae J1349 276.00 hp (205.82 kw)
Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric 280.00 hp (208.80 kw)
Maximum Net Power - Sae J1349 276.00 hp (205.82 kw)
Maximum Net Torque - 1,000 Rpm 1,126.00 lbs ft (1,526.63 nm)
Maximum Net Torque - 1,000 Rpm - Sae J1349 1,126.00 lbs ft (1,526.63 nm)
Maximum Power - 1,800 Rpm - Iso 14396 307.00 hp (228.93 kw)
Maximum Power - 1,800 Rpm - Iso 14396 - Metric 311.00 hp (231.92 kw)
Maximum Power - 1,800 Rpm - Sae J1995 311.00 hp (231.92 kw)
Maximum Power - 1,800 Rpm - Sae J1995 - Metric 315.00 hp (234.90 kw)
Net Power - Iso 9249 276.00 hp (205.82 kw)
Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque - 1,200 Rpm - Iso 14396 1,166.00 lbs ft (1,580.86 nm)
Peak Gross Torque - 1,200 Rpm - Sae J1995 1,179.00 lbs ft (1,598.49 nm)
Stroke 5.90 in (14.99 cm)

Engine - Tier 3/Stage Iiia Equivalent

Caterpillar 966M Wheel Loader Engine - Tier 3/Stage Iiia Equivalent specifications
Emissions Tier 3/Stage IIIA

Engine - Tier 4 Final/Stage Iv

Caterpillar 966M Wheel Loader Engine - Tier 4 Final/Stage Iv specifications
Emissions Tier 4/Stage IV

Hydraulic System

Caterpillar 966M Wheel Loader Hydraulic System specifications
Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise 1.4 s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down 2.6 s
Hydraulic Cycle Time - Rated Payload - Raise From Carry Position 6.1 s
Hydraulic Cycle Time - Rated Payload - Total 10.1 s
Hydraulic Cycle Time - Total 10.1 s
Implement Pump Type Variable Displacement Piston
Implement System - Maximum Operating Pressure 4496 psi
Implement System - Maximum Pump Output At 2,200 Rpm 95.00 gpm (359.58 lpm)
Implement System - Optional 3rd/4th Function Maximum Flow 69.00 gpm (261.17 lpm)
Implement System - Optional 3rd/4th Function Maximum Pressure 3000 psi

Operating Specifications

Caterpillar 966M Wheel Loader Operating Specifications specifications
Breakout Force 38,984.00 lbs (17,682.87 kg)
Note (1) For a machine configuration as defined under ?Weight.?
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 37 Degrees Turn - No Tire Deflection 34,873.00 lbs (15,818.15 kg)
Static Tipping Load - Full 37 Degrees Turn - With Tire Deflection 32,329.00 lbs (14,664.21 kg)

Operational

Caterpillar 966M Wheel Loader Operational specifications
Operating Weight 51,176.00 lbs (23,213.07 kg)

Service Refill Capacities

Caterpillar 966M Wheel Loader Service Refill Capacities specifications
Cooling System 18.90 gal (71.54 l)
Crankcase 6.50 gal (24.60 l)
Def Tank 4.40 gal (16.65 l)
Def Tank* 4.40 gal (16.65 l)
Differential - Final Drives - Front 15.10 gal (57.15 l)
Differential - Final Drives - Rear 15.10 gal (57.15 l)
Fuel Tank 82.70 gal (313.02 l)
Hydraulic Tank 33.00 gal (124.91 l)
Note *Must meet the requirements outlined in ISO 22241-1.
Transmission 15.50 gal (58.67 l)

Sound

Caterpillar 966M Wheel Loader Sound specifications
Exterior Sound Power Level - Iso 6395:2008 109 dB(A)
Exterior Sound Pressure Level - Sae J88:2013 76 dB(A)
Note *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (1) These sound values are for specific operating conditions only.
Note (2) Machine and operator sound levels will vary at different engine and/or cooling fan speeds.
Note (3) Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained.
Note (4) Hearing protection also may be needed when the doors and/or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level - Iso 6396:2008 70 dB(A)
With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)** 108 LWA***
With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)** 69 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008) 109 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013) 76 dB(A)*
With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008) 70 dB(A)

Transmission

Caterpillar 966M Wheel Loader Transmission specifications
Forward - 1 4.00 mph (6.44 kph)
Forward - 2 8.10 mph (13.04 kph)
Forward - 3 14.60 mph (23.50 kph)
Forward - 4 24.90 mph (40.07 kph)
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
Reverse - 1 4.40 mph (7.08 kph)
Reverse - 2 8.90 mph (14.32 kph)
Reverse - 3 16.10 mph (25.91 kph)
Reverse - 4 24.90 mph (40.07 kph)

Weights

Caterpillar 966M Wheel Loader Weights specifications
Note Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 (5.5 yd3) general purpose bucket with BOCE.
Operating Weight 51,176.00 lbs (23,213.07 kg)
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.