| A Height to top of stack |
135.00 in (3.40 m) - Starting 1998
|
| Approx. Shipping Wt. |
52,240.00 lbs (23,690.00 kg) - Starting 1993
|
| B Height to top of engine compartment |
97.00 in (2.48 m) - Starting 1998
|
| Bore |
4.75 in (121.00 mm) - Starting 1998
|
| Breakout Force |
36,400.00 lbf (16,510.00 kgf) - Starting 1993
|
| Breakout force [GP, Bolt-on Edges, 3.8 cu m] |
41,445.00 lbf (184.20 kN) - Starting 1998
|
| Breakout force [GP, Bolt-on Edges, 4 cu m] |
41,288.00 lbf (183.50 kN) - Starting 1998
|
| Breakout force [GP, Bolt-on Edges, 4.3 cu m] |
41,175.00 lbf (183.10 kN) - Starting 1998
|
| Breakout force [GP, Teeth and Segments, 3.8 cu m] |
41,243.00 lbf (183.30 kN) - Starting 1998
|
| Breakout force [GP, Teeth and Segments, 4 cu m] |
41,108.00 lbf (182.70 kN) - Starting 1998
|
| Breakout force [GP, Teeth and Segments, 4.3 cu m] |
40,995.00 lbf (182.40 kN) - Starting 1998
|
| Breakout force [GP, Teeth, 3.8 cu m] |
44,033.00 lbf (195.70 kN) - Starting 1998
|
| Breakout force [Material Handling, Bolt-on Edges, 4 cu m] |
41,243.00 lbf (183.30 kN) - Starting 1998
|
| Breakout force [Material Handling, Bolt-on Edges, 4.3 cu m] |
36,473.00 lbf (162.10 kN) - Starting 1998
|
| Breakout force [Material Handling, Bolt-on Edges, 4.7 cu m] |
36,405.00 lbf (161.80 kN) - Starting 1998
|
| Breakout force [Material Handling, Teeth and Segments, 4 cu m] |
41,040.00 lbf (182.40 kN) - Starting 1998
|
| Breakout force [Material Handling, Teeth and Segments, 4.3 cu m] |
36,270.00 lbf (161.20 kN) - Starting 1998
|
| Breakout force [Material Handling, Teeth and Segments, 4.7 cu m] |
36,202.00 lbf (160.90 kN) - Starting 1998
|
| C Height to top of ROPS |
135.00 in (3.43 m) - Starting 1998
|
| Capacity, heaped [GP, Bolt-on Edges, 4.3 cu m] |
5.60 cu yd (4.30 cu m) - Starting 1998
|
| Capacity, heaped [GP, Teeth and Segments, 4.3 cu m] |
5.60 cu yd (4.30 cu m) - Starting 1998
|
| Capacity, heaped [Material Handling, Bolt-on Edges, 4 cu m] |
5.25 cu yd (4.00 cu m) - Starting 1998
|
| Capacity, heaped [Material Handling, Bolt-on Edges, 4.3 cu m] |
5.60 cu yd (4.30 cu m) - Starting 1998
|
| Capacity, heaped [Material Handling, Bolt-on Edges, 4.7 cu m] |
6.00 cu yd (4.70 cu m) - Starting 1998
|
| Capacity, heaped [Material Handling, Teeth and Segments, 4 cu m] |
5.25 cu yd (4.00 cu m) - Starting 1998
|
| Capacity, heaped [Material Handling, Teeth and Segments, 4.3 cu m] |
5.60 cu yd (4.30 cu m) - Starting 1998
|
| Capacity, heaped [Material Handling, Teeth and Segments, 4.7 cu m] |
6.00 cu yd (4.70 cu m) - Starting 1998
|
| D Hinge pin height at carry position |
18.50 in (470.00 mm) - Starting 1998
|
| Digging depth [GP, Bolt-on Edges, 3.8 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [GP, Bolt-on Edges, 4 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [GP, Bolt-on Edges, 4.3 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth and Segments, 3.8 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth and Segments, 4 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth and Segments, 4.3 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [GP, Teeth, 3.8 cu m] |
1.80 in (46.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Bolt-on Edges, 4 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Bolt-on Edges, 4.3 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Bolt-on Edges, 4.7 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Teeth and Segments, 4 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Teeth and Segments, 4.3 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Digging depth [Material Handling, Teeth and Segments, 4.7 cu m] |
3.00 in (76.00 mm) - Starting 1998
|
| Dump clearance at full lift and - 45° discharge angle |
126.00 in (3.23 m) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Bolt-on Edges, 3.8 cu m] |
130.00 in (3,323.00 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Bolt-on Edges, 4 cu m] |
130.00 in (3,323.00 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Bolt-on Edges, 4.3 cu m] |
130.00 in (3,323.00 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth and Segments, 3.8 cu m] |
125.00 in (3,191.00 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth and Segments, 4 cu m] |
125.00 in (3,191.00 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth and Segments, 4.3 cu m] |
125.00 in (3,191.00 mm) - Starting 1998
|
| Dump clearance at full lift and 45° discharge [GP, Teeth, 3.8 cu m] |
125.00 in (3,191.00 mm) - Starting 1998
|
| Dump Clearance at Full Lift [Actual discharge below 45 degrees; Material Handling, Bolt-on Edges, 4 cu m] |
130.00 in (3,323.00 mm) - Starting 1998
|
| Dump Clearance at Full Lift [Actual discharge below 45 degrees; Material Handling, Bolt-on Edges, 4.3 cu m] |
126.00 in (3,225.00 mm) - Starting 1998
|
| Dump Clearance at Full Lift [Actual discharge below 45 degrees; Material Handling, Bolt-on Edges, 4.7 cu m] |
126.00 in (3,225.00 mm) - Starting 1998
|
| Dump Clearance at Full Lift [Actual discharge below 45 degrees; Material Handling, Teeth and Segments, 4 cu m] |
125.00 in (3,191.00 mm) - Starting 1998
|
| Dump Clearance at Full Lift [Actual discharge below 45 degrees; Material Handling, Teeth and Segments, 4.3 cu m] |
121.00 in (3,097.00 mm) - Starting 1998
|
| Dump Clearance at Full Lift [Actual discharge below 45 degrees; Material Handling, Teeth and Segments, 4.7 cu m] |
121.00 in (3,097.00 mm) - Starting 1998
|
| Dump Clearance at max height |
126.00 in (3.22 m) - Starting 1993
|
| Engine Displacement |
638.00 cu in (10.50 L) - Starting 1998
|
| Engine Model |
3306TA - Starting 1998
|
| F Hinge pin height at full lift |
175.00 in (4.43 m) - Starting 1998
|
| Flywheel Horse- power |
250.00 hp (186.43 kw) - Starting 1993
|
| Flywheel Power |
250.00 hp (187.00 kW) - Starting 1998
|
| Forward Speed - 1st |
4.50 mph (7.20 km/h) - Starting 1998
|
| Forward Speed - 2nd |
7.80 mph (12.60 km/h) - Starting 1998
|
| Forward Speed - 3rd |
13.50 mph (21.70 km/h) - Starting 1998
|
| Forward Speed - 4th |
23.20 mph (37.30 km/h) - Starting 1998
|
| Fuel Tank Capacity |
99.60 US gal (377.00 L) - Starting 1998
|
| G Maximum overall height |
229.00 in (5.81 m) - Starting 1998
|
| Ground Clearance |
19.00 in (482.00 mm) - Starting 1998
|
| Ground clearance (std. tires) |
19.00 in (482.00 mm) - Starting 1998
|
| H Maximum digging depth |
3.00 in (76.00 mm) - Starting 1998
|
| Hydraulic Cycle Time - Dump [Rated load in bucket; lowering empty in float] |
1.3 sec - Starting 1998
|
| Hydraulic Cycle Time - Lower (Empty, Float Down) [Rated load in bucket; lowering empty in float] |
2.1 sec - Starting 1998
|
| Hydraulic Cycle Time - Raise [Rated load in bucket; lowering empty in float] |
6.1 sec - Starting 1998
|
| Hydraulic Cycle Time - Total [Rated load in bucket; lowering empty in float] |
9.5 sec - Starting 1998
|
| Hydraulic System Capacity - (includes tank) |
54.00 US gal (205.00 L) - Starting 1998
|
| Hydraulic Tank Capacity |
37.00 US gal (140.00 L) - Starting 1998
|
| J Machine center point to axle |
66.00 in (1.68 m) - Starting 1998
|
| K Wheelbase |
132.00 in (3.35 m) - Starting 1998
|
| L Radius of wheel |
34.00 in (864.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Bolt-on Edges, 3.8 cu m] |
582.00 in (14,782.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Bolt-on Edges, 4 cu m] |
582.00 in (14,782.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Bolt-on Edges, 4.3 cu m] |
588.00 in (14,930.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth and Segments, 3.8 cu m] |
588.00 in (14,936.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth and Segments, 4 cu m] |
588.00 in (14,936.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth and Segments, 4.3 cu m] |
594.00 in (15,084.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [GP, Teeth, 3.8 cu m] |
588.00 in (14,936.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Bolt-on Edges, 4 cu m] |
582.00 in (14,782.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Bolt-on Edges, 4.3 cu m] |
591.00 in (15,012.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Bolt-on Edges, 4.7 cu m] |
591.00 in (15,012.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Teeth and Segments, 4 cu m] |
588.00 in (14,936.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Teeth and Segments, 4.3 cu m] |
595.00 in (15,120.00 mm) - Starting 1998
|
| Loader clearance circle with bucket in carry position [Material Handling, Teeth and Segments, 4.7 cu m] |
595.00 in (15,120.00 mm) - Starting 1998
|
| M Maximum overall length |
342.00 in (8.68 m) - Starting 1998
|
| Max.Reach at max height |
53.00 in (1,357.00 mm) - Starting 1993
|
| Maximum Forward Speed |
23.20 mph (37.30 km/h) - Starting 1993
|
| Maximum Reverse Speed |
26.50 mph (42.70 km/h) - Starting 1993
|
| N Reach at full lift |
53.00 in (1,355.00 mm) - Starting 1998
|
| No. Cylinders |
6 - Starting 1998
|
| O Maximum rollback at maximum lift |
54.3 deg - Starting 1998
|
| Operating weight [GP, Bolt-on Edges, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,052.00 lbs (23,153.00 kg) - Starting 1998
|
| Operating weight [GP, Bolt-on Edges, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,209.00 lbs (23,224.00 kg) - Starting 1998
|
| Operating weight [GP, Bolt-on Edges, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,438.00 lbs (23,328.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth and Segments, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,590.00 lbs (23,397.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth and Segments, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,820.00 lbs (23,501.00 kg) - Starting 1998
|
| Operating weight [GP, Teeth, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,251.00 lbs (23,243.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Bolt-on Edges, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,399.00 lbs (23,310.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Bolt-on Edges, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
52,124.00 lbs (23,639.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Bolt-on Edges, 4.7 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
52,237.00 lbs (23,693.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Teeth and Segments, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
51,780.00 lbs (23,483.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Teeth and Segments, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
52,505.00 lbs (23,812.00 kg) - Starting 1998
|
| Operating weight [Material Handling, Teeth and Segments, 4.7 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
52,625.00 lbs (23,866.00 kg) - Starting 1998
|
| Overall height with bucket at full raise [GP, Bolt-on Edges, 3.8 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Bolt-on Edges, 4 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Bolt-on Edges, 4.3 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth and Segments, 3.8 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth and Segments, 4 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth and Segments, 4.3 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [GP, Teeth, 3.8 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Bolt-on Edges, 4 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Bolt-on Edges, 4.3 cu m] |
231.00 in (5,865.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Bolt-on Edges, 4.7 cu m] |
229.00 in (5,808.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Teeth and Segments, 4 cu m] |
232.00 in (5,893.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Teeth and Segments, 4.3 cu m] |
231.00 in (5,865.00 mm) - Starting 1998
|
| Overall height with bucket at full raise [Material Handling, Teeth and Segments, 4.7 cu m] |
229.00 in (5,808.00 mm) - Starting 1998
|
| Overall length [GP, Bolt-on Edges, 3.8 cu m] |
336.00 in (8,526.00 mm) - Starting 1998
|
| Overall length [GP, Bolt-on Edges, 4 cu m] |
336.00 in (8,526.00 mm) - Starting 1998
|
| Overall length [GP, Bolt-on Edges, 4.3 cu m] |
336.00 in (8,526.00 mm) - Starting 1998
|
| Overall length [GP, Teeth and Segments, 3.8 cu m] |
343.00 in (8,707.00 mm) - Starting 1998
|
| Overall length [GP, Teeth and Segments, 4 cu m] |
343.00 in (8,707.00 mm) - Starting 1998
|
| Overall length [GP, Teeth and Segments, 4.3 cu m] |
343.00 in (8,707.00 mm) - Starting 1998
|
| Overall length [GP, Teeth, 3.8 cu m] |
343.00 in (8,707.00 mm) - Starting 1998
|
| Overall length [Material Handling, Bolt-on Edges, 4 cu m] |
336.00 in (8,526.00 mm) - Starting 1998
|
| Overall length [Material Handling, Bolt-on Edges, 4.3 cu m] |
342.00 in (8,675.00 mm) - Starting 1998
|
| Overall length [Material Handling, Bolt-on Edges, 4.7 cu m] |
342.00 in (8,675.00 mm) - Starting 1998
|
| Overall length [Material Handling, Teeth and Segments, 4 cu m] |
343.00 in (8,707.00 mm) - Starting 1998
|
| Overall length [Material Handling, Teeth and Segments, 4.3 cu m] |
349.00 in (8,856.00 mm) - Starting 1998
|
| Overall length [Material Handling, Teeth and Segments, 4.7 cu m] |
349.00 in (8,856.00 mm) - Starting 1998
|
| P Maximum rollback at carry height |
47 deg - Starting 1998
|
| Product Identification Prefix |
7SK - Starting 1993
|
| Q Maximum rollback at ground |
43 deg - Starting 1998
|
| Rated bucket capacity [GP, Bolt-on Edges, 3.8 cu m] |
5.00 cu yd (3.80 cu m) - Starting 1998
|
| Rated bucket capacity [GP, Bolt-on Edges, 4 cu m] |
5.25 cu yd (4.00 cu m) - Starting 1998
|
| Rated bucket capacity [GP, Teeth and Segments, 3.8 cu m] |
5.00 cu yd (3.80 cu m) - Starting 1998
|
| Rated bucket capacity [GP, Teeth and Segments, 4 cu m] |
5.25 cu yd (4.00 cu m) - Starting 1998
|
| Rated bucket capacity [GP, Teeth, 3.8 cu m] |
5.00 cu yd (3.80 cu m) - Starting 1998
|
| Rated Capacity |
6.00 cu yd (4.70 cu m) - Starting 1993
|
| Rated Engine RPM |
2200 rpm - Starting 1998
|
| Reach at 45 degree discharge [Measured below full lift; Material Handling, Bolt-on Edges, 4 cu m] |
49.00 in (1,238.00 mm) - Starting 1998
|
| Reach at 45 degree discharge [Measured below full lift; Material Handling, Bolt-on Edges, 4.3 cu m] |
53.00 in (1,357.00 mm) - Starting 1998
|
| Reach at 45 degree discharge [Measured below full lift; Material Handling, Bolt-on Edges, 4.7 cu m] |
53.00 in (1,357.00 mm) - Starting 1998
|
| Reach at 45 degree discharge [Measured below full lift; Material Handling, Teeth and Segments, 4 cu m] |
53.00 in (1,348.00 mm) - Starting 1998
|
| Reach at 45 degree discharge [Measured below full lift; Material Handling, Teeth and Segments, 4.3 cu m] |
58.00 in (1,469.00 mm) - Starting 1998
|
| Reach at 45 degree discharge [Measured below full lift; Material Handling, Teeth and Segments, 4.7 cu m] |
58.00 in (1,469.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [GP, Bolt-on Edges, 3.8 cu m] |
78.00 in (1,981.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [GP, Bolt-on Edges, 4 cu m] |
78.00 in (1,981.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [GP, Bolt-on Edges, 4.3 cu m] |
78.00 in (1,981.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [GP, Teeth and Segments, 3.8 cu m] |
81.00 in (2,047.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [GP, Teeth and Segments, 4 cu m] |
81.00 in (2,047.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [GP, Teeth and Segments, 4.3 cu m] |
81.00 in (2,047.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [GP, Teeth, 3.8 cu m] |
81.00 in (2,047.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [Material Handling, Bolt-on Edges, 4 cu m] |
72.00 in (1,834.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [Material Handling, Bolt-on Edges, 4.3 cu m] |
74.00 in (1,887.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [Material Handling, Bolt-on Edges, 4.7 cu m] |
74.00 in (1,887.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [Material Handling, Teeth and Segments, 4 cu m] |
74.00 in (1,876.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [Material Handling, Teeth and Segments, 4.3 cu m] |
76.00 in (1,926.00 mm) - Starting 1998
|
| Reach at 45° discharge and 2130 mm (7'0") clearance [Material Handling, Teeth and Segments, 4.7 cu m] |
76.00 in (1,926.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Bolt-on Edges, 3.8 cu m] |
45.00 in (1,147.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Bolt-on Edges, 4 cu m] |
45.00 in (1,147.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Bolt-on Edges, 4.3 cu m] |
45.00 in (1,147.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth and Segments, 3.8 cu m] |
50.00 in (1,272.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth and Segments, 4 cu m] |
50.00 in (1,272.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth and Segments, 4.3 cu m] |
50.00 in (1,272.00 mm) - Starting 1998
|
| Reach at full lift and 45° discharge [GP, Teeth, 3.8 cu m] |
50.00 in (1,272.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Bolt-on Edges, 3.8 cu m] |
107.00 in (2,715.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Bolt-on Edges, 4 cu m] |
107.00 in (2,715.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Bolt-on Edges, 4.3 cu m] |
107.00 in (2,715.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth and Segments, 3.8 cu m] |
114.00 in (2,896.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth and Segments, 4 cu m] |
114.00 in (2,896.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth and Segments, 4.3 cu m] |
114.00 in (2,896.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [GP, Teeth, 3.8 cu m] |
114.00 in (2,896.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Bolt-on Edges, 4 cu m] |
107.00 in (2,715.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Bolt-on Edges, 4.3 cu m] |
113.00 in (2,864.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Bolt-on Edges, 4.7 cu m] |
113.00 in (2,864.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Teeth and Segments, 4 cu m] |
114.00 in (2,896.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Teeth and Segments, 4.3 cu m] |
120.00 in (3,045.00 mm) - Starting 1998
|
| Reach with lift arms horizontal and bucket level [Material Handling, Teeth and Segments, 4.7 cu m] |
120.00 in (3,045.00 mm) - Starting 1998
|
| Remarks |
Material Handler New Model - Starting 1993
|
| Reverse Speed - 1st |
5.10 mph (8.20 km/h) - Starting 1998
|
| Reverse Speed - 2nd |
8.90 mph (14.40 km/h) - Starting 1998
|
| Reverse Speed - 3rd |
15.30 mph (24.60 km/h) - Starting 1998
|
| Reverse Speed - 4th |
26.50 mph (42.70 km/h) - Starting 1998
|
| Static tipping load, full 35° turn [GP, Bolt-on Edges, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
33,520.00 lbs (15,202.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [GP, Bolt-on Edges, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
33,339.00 lbs (15,120.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [GP, Bolt-on Edges, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
33,546.00 lbs (15,214.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [GP, Teeth and Segments, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
33,132.00 lbs (15,026.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [GP, Teeth and Segments, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
32,951.00 lbs (14,944.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [GP, Teeth and Segments, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
32,713.00 lbs (14,836.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [GP, Teeth, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
33,586.00 lbs (15,232.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [Material Handling, Bolt-on Edges, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
33,132.00 lbs (15,026.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [Material Handling, Bolt-on Edges, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
31,906.00 lbs (14,470.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [Material Handling, Bolt-on Edges, 4.7 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
31,870.00 lbs (14,435.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [Material Handling, Teeth and Segments, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
32,741.00 lbs (14,849.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [Material Handling, Teeth and Segments, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
31,520.00 lbs (14,295.00 kg) - Starting 1998
|
| Static tipping load, full 35° turn [Material Handling, Teeth and Segments, 4.7 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
31,484.00 lbs (14,279.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Bolt-on Edges, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
37,137.00 lbs (16,850.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Bolt-on Edges, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
36,961.00 lbs (16,770.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Bolt-on Edges, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
37,170.00 lbs (16,865.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth and Segments, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
36,749.00 lbs (16,674.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth and Segments, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
36,525.00 lbs (16,595.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth and Segments, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
36,337.00 lbs (16,487.00 kg) - Starting 1998
|
| Static tipping load, straight [GP, Teeth, 3.8 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
37,241.00 lbs (16,897.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Bolt-on Edges, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
36,749.00 lbs (16,674.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Bolt-on Edges, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
35,476.00 lbs (16,096.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Bolt-on Edges, 4.7 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
35,447.00 lbs (16,083.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Teeth and Segments, 4 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
36,359.00 lbs (16,497.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Teeth and Segments, 4.3 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
35,088.00 lbs (15,920.00 kg) - Starting 1998
|
| Static tipping load, straight [Material Handling, Teeth and Segments, 4.7 cu m] [Sound-suppressed cab, ROPS, 26.5-25 tires, full fuel, coolant, lubricants, operator] |
35,066.00 lbs (15,910.00 kg) - Starting 1998
|
| Stroke |
6.00 in (152.00 mm) - Starting 1998
|
| Struck capacity [GP, Bolt-on Edges, 3.8 cu m] |
4.25 cu yd (3.25 cu m) - Starting 1998
|
| Struck capacity [GP, Bolt-on Edges, 4 cu m] |
4.43 cu yd (3.39 cu m) - Starting 1998
|
| Struck capacity [GP, Bolt-on Edges, 4.3 cu m] |
4.67 cu yd (3.57 cu m) - Starting 1998
|
| Struck capacity [GP, Teeth and Segments, 3.8 cu m] |
4.25 cu yd (3.25 cu m) - Starting 1998
|
| Struck capacity [GP, Teeth and Segments, 4 cu m] |
4.43 cu yd (3.39 cu m) - Starting 1998
|
| Struck capacity [GP, Teeth and Segments, 4.3 cu m] |
4.67 cu yd (3.57 cu m) - Starting 1998
|
| Struck capacity [GP, Teeth, 3.8 cu m] |
4.22 cu yd (3.23 cu m) - Starting 1998
|
| Struck capacity [Material Handling, Bolt-on Edges, 4 cu m] |
4.50 cu yd (3.44 cu m) - Starting 1998
|
| Struck capacity [Material Handling, Bolt-on Edges, 4.3 cu m] |
4.80 cu yd (3.67 cu m) - Starting 1998
|
| Struck capacity [Material Handling, Bolt-on Edges, 4.7 cu m] |
5.11 cu yd (3.91 cu m) - Starting 1998
|
| Struck capacity [Material Handling, Teeth and Segments, 4 cu m] |
4.50 cu yd (3.44 cu m) - Starting 1998
|
| Struck capacity [Material Handling, Teeth and Segments, 4.3 cu m] |
4.80 cu yd (3.67 cu m) - Starting 1998
|
| Struck capacity [Material Handling, Teeth and Segments, 4.7 cu m] |
5.11 cu yd (3.91 cu m) - Starting 1998
|
| Tires used for measurements |
26.5-25 (L-3 - Starting 1998
|
| Tread Width |
87.00 in (2.20 m) - Starting 1998
|
| Tread width (std. tires) |
87.00 in (2.20 m) - Starting 1998
|
| Width Over Tires |
116.00 in (2.94 m) - Starting 1998
|
| Width over tires (std. tires) |
116.00 in (2.94 m) - Starting 1998
|
| Width [GP, Bolt-on Edges, 3.8 cu m] |
120.00 in (3,059.00 mm) - Starting 1998
|
| Width [GP, Bolt-on Edges, 4 cu m] |
120.00 in (3,059.00 mm) - Starting 1998
|
| Width [GP, Bolt-on Edges, 4.3 cu m] |
127.00 in (3,220.00 mm) - Starting 1998
|
| Width [GP, Teeth and Segments, 3.8 cu m] |
122.00 in (3,107.00 mm) - Starting 1998
|
| Width [GP, Teeth and Segments, 4 cu m] |
122.00 in (3,107.00 mm) - Starting 1998
|
| Width [GP, Teeth and Segments, 4.3 cu m] |
129.00 in (3,268.00 mm) - Starting 1998
|
| Width [GP, Teeth, 3.8 cu m] |
122.00 in (3,107.00 mm) - Starting 1998
|
| Width [Material Handling, Bolt-on Edges, 4 cu m] |
120.00 in (3,059.00 mm) - Starting 1998
|
| Width [Material Handling, Bolt-on Edges, 4.3 cu m] |
127.00 in (3,220.00 mm) - Starting 1998
|
| Width [Material Handling, Bolt-on Edges, 4.7 cu m] |
127.00 in (3,220.00 mm) - Starting 1998
|
| Width [Material Handling, Teeth and Segments, 4 cu m] |
122.00 in (3,107.00 mm) - Starting 1998
|
| Width [Material Handling, Teeth and Segments, 4.3 cu m] |
127.00 in (3,220.00 mm) - Starting 1998
|
| Width [Material Handling, Teeth and Segments, 4.7 cu m] |
129.00 in (3,268.00 mm) - Starting 1998
|