Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 980M is a large wheel loader designed for heavy-duty material handling in construction, quarry, aggregate, and industrial applications. Part of Caterpillar's M Series, the 980M features a fuel-efficient Cat engine, advanced hydraulic system, and a durable powertrain built for high productivity and reliability. It is commonly used for loading trucks, stockpiling material, and moving bulk aggregates. The 980M offers operator-focused controls, improved visibility, and service access designed to support uptime and maintenance efficiency. As a wheel loader, it is suited for demanding earthmoving and material loading tasks where cycle time, breakout force, and load capacity are important.
| 1 Fork tine length | 72.00 in (182.88 cm) - Starting 2016 |
|---|---|
| 10 Overall height of fork at full lift (top of carriage to ground) | 229.40 in (582.68 cm) - Starting 2016 |
| 11 Clearance at full lift and maximum dump | 91.50 in (232.41 cm) - Starting 2016 |
| 12 Maximum discharge angle from horizontal | 55 deg - Starting 2016 |
| 13 Carriage width | 112.30 in (285.24 cm) - Starting 2016 |
| 14 Carriage height | 62.30 in (158.24 cm) - Starting 2016 |
| 15 Outside tine width (maximum spread) | 105.10 in (266.95 cm) - Starting 2016 |
| 16 Outside tine width (minimum spread) | 33.50 in (85.09 cm) - Starting 2016 |
| 1st | 7.8 4.8 - Starting 2017 |
| 2 Load center | 36.00 in (91.44 cm) - Starting 2016 |
| 2nd | 15.2 9.4 - Starting 2017 |
| 3 Maximum overall length | 409.90 in (1,041.15 cm) - Starting 2016 |
| 3rd | 26.9 16.7 - Starting 2017 |
| 4 Reach with forks at ground level | 54.50 in (138.43 cm) - Starting 2016 |
| 4th | 39.5 24.5 - Starting 2016 |
| 4th Speeds Reverse | 24.50 mph (39.43 kph) - Starting 2017 |
| 5 Ground to top of tine at minimum height and fork level | -1.70 in (-4.32 cm) - Starting 2016 |
| 6 Reach with arms horizontal and forks level | 78.40 in (199.14 cm) - Starting 2016 |
| 7 Reach with fork at maximum height | 41.90 in (106.43 cm) - Starting 2016 |
| 8 Ground to top of tine with arms horizontal and fork level | 81.40 in (206.76 cm) - Starting 2016 |
| 9 Ground to top of tine at maximum height and fork level | 170.70 in (433.58 cm) - Starting 2016 |
| A - Tine Length | 72.00 in (182.88 cm) - Starting 2017 |
| A Height to top of exhaust pipe | 148.00 in (375.92 cm) - Starting 2015 |
| B - Overall Width | 109.00 in (276.86 cm) - Starting 2017 |
| B Height to top of engine compartment | 123.00 in (312.42 cm) - Starting 2015 |
| Bore | 5.10 in (12.95 cm) - Starting 2015 |
| Breakout force (§) | 50,466.00 lbf (224.00 kN) - Starting 2015 |
| Bucket Capacity | 5.25 - 16 (4.0 - 12.2) - Starting 2021 |
| Bucket Weight | 5,895.00-6,290.00 lbs (2,673.93-2,853.10 kg) |
| Bucket Width | 134.00 in (340.36 cm) - Starting 2016 |
| C Height to top of ROPS | 151.00 in (383.54 cm) - Starting 2015 |
| Capacity - 110% | 7.77 cu yd (5.94 cu m) - Starting 2015 |
| Capacity - rated | 7.06 cu yd (5.40 cu m) - Starting 2015 |
| configuration: L3 Michelin XHA tires, air conditioning, ride control, power | mined by: - Starting 2016 |
| D - Minimum Opening | 23.00 in (58.42 cm) - Starting 2017 |
| D Hinge pin height at carry position | 25.00 in (63.50 cm) - Starting 2015 |
| DEF Tank Capacity | 5.50 US gal (21.00 L) - Starting 2015 |
| Digging depth | 4.00 in (10.16 cm) - Starting 2015 |
| Dump clearance at maximum lift and 45° discharge | 128.00 in (325.12 cm) - Starting 2015 |
| E - Maximum Clamp Opening | 116.00 in (294.64 cm) - Starting 2017 |
| E Dump clearance at full lift and - 45° discharge angle | 129.00 in (327.66 cm) - Starting 2015 |
| E Dump clearance at full lift and - F Hinge pin height at full lift | 179.00 in (454.66 cm) - Starting 2015 |
| Emission Standards | Tier 4 Final - Starting 2017 |
| Engine Displacement | 762.80 cu in (12,500.08 cu cm) - Starting 2015 |
| Engine Model | C13 ACERT - Starting 2015 |
| Engine Power | 386.00 hp (287.84 kw) - Starting 2019 |
| Engine type | Cat C13 - Starting 2021 |
| Fuel Tank Capacity | 112.50 US gal (426.00 L) - Starting 2017 |
| G Maximum overall height | 253.00 in (642.62 cm) - Starting 2015 |
| Ground Clearance | 18.00 in (45.72 cm) - Starting 2015 |
| Ground clearance (std. tires) | 18.00 in (45.72 cm) - Starting 2015 |
| Group Number - Logging Arrangement | 384 - 7540 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Dump (at Maximum Raise) | 1.7 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Lower (Empty, Float Down) | 3.1 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Raise (from Carry Position) | 5.3 sec - Starting 2017 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Total | 10.1 sec - Starting 2017 |
| Hydraulic Tank Capacity | 48.00 US gal (180.00 L) - Starting 2015 |
| J Machine center point to axle | 75.00 in (190.50 cm) - Starting 2015 |
| K Wheel base | 150.00 in (381.00 cm) - Starting 2015 |
| L Radius of tire | 35.00 in (88.90 cm) - Starting 2015 |
| Loader clearance circle with bucket at carry position | 600.00 in (1,524.00 cm) - Starting 2015 |
| M Maximum overall length | 374.00 in (949.96 cm) - Starting 2015 |
| Machine and work tool availability varies by region. Contact your local Cat | dealer for product availability. - Starting 2016 |
| Max Dump Height | 11.40 ft (3.47 m) - Starting 2019 |
| Maximum Engine: Gross | 412.00 hp (307.23 kw) - Starting 2017 |
| Maximum Engine: Net | 373.00 hp (278.15 kw) - Starting 2017 |
| Maximum Net Power Engine RPM | 1800 rpm - Starting 2017 |
| N Reach at full lift | 59.00 in (149.86 cm) - Starting 2015 |
| No. Cylinders | 6 - Starting 2015 |
| O Maximum rollback at maximum lift | 61 deg - Starting 2015 |
| Operating Weight | 66,337.00 lbs (30,089.99 kg) - Starting 2021 |
| Overall height with bucket at maximum lift | 253.00 in (642.62 cm) - Starting 2015 |
| Overall length | 374.00 in (949.96 cm) - Starting 2015 |
| P Maximum rollback at carry height | 48 deg - Starting 2015 |
| Q Maximum rollback at ground | 40 deg - Starting 2015 |
| Rated load (CEN EN 474-3 firm and level ground) | 16,483.00 lbs (7,476.57 kg) - Starting 2016 |
| Rated load (CEN EN 474-3 rough terrain) | 15,412.00 lbs (6,990.77 kg) - Starting 2016 |
| Rated load (SAE J1197) | 12,844.00 lbs (5,825.95 kg) - Starting 2016 |
| Reach at level lift arm and bucket level | 116.00 in (294.64 cm) - Starting 2015 |
| Reach at maximum lift and 45° discharge | 58.00 in (147.32 cm) - Starting 2015 |
| Specifications and ratings conform to the following standards: SAE J1197, SAE J732, CEN EN 474-3. Rated load is determined by considering % of machine stability, hydraulic | lift capacity, and hydraulic - Starting 2016 |
| Speeds Reverse - 1st | 4.80 mph (7.72 kph) - Starting 2015 |
| Speeds Reverse - 2nd | 9.40 mph (15.13 kph) - Starting 2015 |
| Speeds Reverse - 3rd | 16.70 mph (26.88 kph) - Starting 2015 |
| Speeds Reverse - 4th Hydraulic Cycle Time, Rated Load in Bucket | 24.50 mph (39.43 kph) - Starting 2016 |
| Speeds Reverse - Dump | 1.7 - Starting 2015 |
| Speeds Reverse - Dump (at Maximum Raise) | 1.7 - Starting 2017 |
| Speeds Reverse - Lower (Empty, Float Down) | 3.1 - Starting 2015 |
| Speeds Reverse - Raise | 5.3 - Starting 2015 |
| Speeds Reverse - Raise (from Carry Position) | 5.3 - Starting 2017 |
| Speeds Reverse - Total | 10.1 - Starting 2015 |
| Static tipping load, articulated (ISO) | 43,121.00 lbs (19,559.38 kg) - Starting 2015 |
| Static tipping load, articulated (Rigid Tire) | 45,834.00 lbs (20,789.98 kg) - Starting 2015 |
| Static tipping load, straight (ISO) | 49,897.00 lbs (22,632.93 kg) - Starting 2015 |
| Static tipping load, straight (Rigid Tire) | 52,946.00 lbs (24,015.93 kg) - Starting 2015 |
| Static tipping loads and operating weight are based on the following loader | The rated operating - Starting 2016 |
| Stroke | 6.20 in (15.75 cm) - Starting 2015 |
| the machine configuration for handling target payloads in your specific | machine application. - Starting 2016 |
| Tine capacity | 32,540.00 lbs (14,759.91 kg) - Starting 2016 |
| Tine thickness | 3.50 in (8.89 cm) - Starting 2016 |
| Tine width (single tine) | 7.90 in (20.07 cm) - Starting 2016 |
| Tip Load | 49,897 22,633) - Starting 2021 |
| Tipping load - forks level articulated | 25,687.00 lbs (11,651.44 kg) - Starting 2016 |
| Tipping load - forks level straight | 29,788.00 lbs (13,511.63 kg) - Starting 2016 |
| Tires used for measurements | L4 Michelin XLDD1 - Starting 2015 |
| train guard, full fluids, fuel tank, coolant, lubricants, and operator. | · SAE J1197: 50% of · CEN EN 474-3: - Starting 2016 |
| Travel Speed(Fwd/Rev) | 24.9 / 24.9 mph - Starting 2021 |
| Tread Width | 96.00 in (243.84 cm) - Starting 2015 |
| Tread width (std. tires) | 96.00 in (243.84 cm) - Starting 2015 |
| Weight, Approximate | 8,726.00 lbs (3,958.05 kg) - Starting 2017 |
| Width | 135.00 in (342.90 cm) - Starting 2015 |
| Width Over Tires | 129.00 in (327.66 cm) - Starting 2015 |
| Width over tires (std. tires) | 129.00 in (327.66 cm) - Starting 2015 |
| Front | Fixed |
|---|---|
| Maximum Single-Wheel Rise And Fall | 22.50 in (57.15 cm) |
| Rear | Oscillating ?13 degrees |
| Brakes | Brakes meet ISO 3450:2011 standards |
|---|
| Bucket Range | 4.2-12.2 m (5.25-16.0 yd) |
|---|
| Bucket Capacities | 4.2-12.2 m3 (5.25-16.0 yd3) |
|---|
| Rops/Fops | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
|---|
| Ground Clearance | 1.42 ft (0.43 m) |
|---|---|
| Height | 12.83 ft (3.91 m) |
| Height To Top Of Cab | 10.25 ft (3.12 m) |
| Length | 31.17 ft (9.50 m) |
| Length With Bucket On Ground | 26.17 ft (7.98 m) |
| Weight | 66,337.00 lbs (30,089.99 kg) |
| Wheelbase | 12.50 ft (3.81 m) |
| Width | 10.75 ft (3.28 m) |
| Width Over Tires | 10.83 ft (3.30 m) |
| Centerline Of Rear Axle To Edge Of Counterweight | 8.17 ft (2.49 m) |
|---|---|
| Centerline Of Rear Axle To Hitch | 6.25 ft (1.90 m) |
| Ground Clearance | 1.42 ft (0.43 m) |
| Height - Top Of Exhaust Pipe | 12.33 ft (3.76 m) |
| Height - Top Of Hood | 10.25 ft (3.12 m) |
| Height - Top Of Rops | 12.58 ft (3.83 m) |
| Hinge Pin Height At Carry | 2.25 ft (0.69 m) |
| Hinge Pin Height At Maximum Lift | 15.58 ft (4.75 m) |
| Lift Arm Clearance At Maximum Lift | 13.08 ft (3.99 m) |
| Maximum Width Over Tires | 10.83 ft (3.30 m) |
| Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
| Overall Length - Without Bucket | 26.83 ft (8.18 m) |
| Rack Back - Carry Height | 48 degrees |
| Rack Back - Maximum Lift | 61 degrees |
| Rack Back At Ground | 39 degrees |
| Tread Width | 8.00 ft (2.44 m) |
| Wheel Base | 12.50 ft (3.81 m) |
| Centerline Of Rear Axle To Edge Of Counterweight | 8.17 ft (2.49 m) |
|---|---|
| Centerline Of Rear Axle To Hitch | 6.25 ft (1.90 m) |
| Ground Clearance | 1.42 ft (0.43 m) |
| Height - Top Of Exhaust Pipe | 12.33 ft (3.76 m) |
| Height - Top Of Hood | 10.25 ft (3.12 m) |
| Height - Top Of Rops | 12.58 ft (3.83 m) |
| Hinge Pin Height At Carry | 2.08 ft (0.63 m) |
| Hinge Pin Height At Maximum Lift | 14.83 ft (4.52 m) |
| Lift Arm Clearance At Maximum Lift | 12.42 ft (3.79 m) |
| Maximum Width Over Tires | 10.83 ft (3.30 m) |
| Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
| Overall Length - Without Bucket | 26.17 ft (7.98 m) |
| Rack Back - Carry Height | 48 degrees |
| Rack Back - Maximum Lift | 61 degrees |
| Rack Back At Ground | 40 degrees |
| Tread Width | 8.00 ft (2.44 m) |
| Wheel Base | 12.50 ft (3.81 m) |
| Engine Make | 2236 |
|---|---|
| Engine Model | CAT C13 ACERT |
| Gross Power | 417.00 hp (310.96 kw) |
| Max Torque | 1,617.00 lbs ft (2,192.33 nm) |
| Maximum Net Power - 1,700 Rpm - Iso 9249 | 386.00 hp (287.84 kw) |
| Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric | 392.00 hp (292.32 kw) |
| Maximum Net Power - 1,700 Rpm - Sae J1349 | 386.00 hp (287.84 kw) |
| Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric | 392.00 hp (292.32 kw) |
| Maximum Net Power - 1,800 Rpm - Iso 9249 | 373.00 hp (278.15 kw) |
| Maximum Net Power - 1,800 Rpm - Iso 9249 - Metric | 378.00 hp (281.88 kw) |
| Maximum Net Power - 1,800 Rpm - Sae J1349 | 373.00 hp (278.15 kw) |
| Maximum Net Power - 1,800 Rpm - Sae J1349 - Metric | 378.00 hp (281.88 kw) |
| Maximum Net Torque - 1,000 Rpm | 1,505.00 lbs ft (2,040.48 nm) |
| Maximum Net Torque - 1,100 Rpm | 1,515.00 lbs ft (2,054.04 nm) |
| Maximum Power - 1,700 Rpm - Iso 14396 | 420.00 hp (313.20 kw) |
| Maximum Power - 1,700 Rpm - Iso 14396 - Metric | 426.00 hp (317.67 kw) |
| Maximum Power - 1,700 Rpm - Sae J1995 | 425.00 hp (316.93 kw) |
| Maximum Power - 1,700 Rpm - Sae J1995 - Metric | 431.00 hp (321.40 kw) |
| Maximum Power - 1,800 Rpm - Iso 14396 | 406.00 hp (302.76 kw) |
| Maximum Power - 1,800 Rpm - Iso 14396 - Metric | 412.00 hp (307.23 kw) |
| Maximum Power - 1,800 Rpm - Sae J1995 | 412.00 hp (307.23 kw) |
| Maximum Power - 1,800 Rpm - Sae J1995 - Metric | 417.00 hp (310.96 kw) |
| Net Power | 378.00 hp (281.88 kw) |
| Net Power - Iso 9249 | 386.00 hp (287.84 kw) |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
| Number Of Cylinders | 6 |
| Peak Gross Torque - 1,200 Rpm - Iso 14396 | 1,609.00 lbs ft (2,181.48 nm) |
| Peak Gross Torque - 1,200 Rpm - Sae J1995 | 1,627.00 lbs ft (2,205.89 nm) |
| Peak Gross Torque - 1,300 Rpm - Iso 14396 | 1,602.00 lbs ft (2,171.99 nm) |
| Peak Gross Torque - 1,300 Rpm - Sae J1995 | 1,617.00 lbs ft (2,192.33 nm) |
| Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent: Maximum Power - Sae J1995 | 412.00 hp (307.23 kw) |
| U.S. Epa Tier 4 Final/Eu Stage Iv - Maximum Power - Sae J1995 | 425.00 hp (316.93 kw) |
| Bore | 5.20 in (13.21 cm) |
|---|---|
| Displacement | 763.00 cu in (12,503.36 cu cm) |
| Emissions | Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards. |
| Engine Model | Cat C13 ACERT |
| Maximum Net Power - 1,800 Rpm - Sae J1349 | 373.00 hp (278.15 kw) |
| Maximum Net Torque - 1,000 Rpm - Sae J1349 | 1,505.00 lbs ft (2,040.48 nm) |
| Maximum Power - 1,800 Rpm - Sae J1995 | 417.00 hp (310.96 kw) |
| Peak Gross Torque - 1,300 Rpm - Sae J1995 | 1,617.00 lbs ft (2,192.33 nm) |
| Stroke | 6.20 in (15.75 cm) |
| Emissions | Tier 3/Stage IIIA |
|---|
| Bore | 5.20 in (13.21 cm) |
|---|---|
| Displacement | 763.00 cu in (12,503.36 cu cm) |
| Emissions | Cat engine with ACERT Technology ? meets Tier 4 Final/Stage IV emission standards. |
| Engine Model | Cat C13 ACERT |
| Maximum Net Power - 1,700 Rpm - Sae J1349 | 386.00 hp (287.84 kw) |
| Maximum Net Torque - 1,100 Rpm - Sae J1349 | 1,515.00 lbs ft (2,054.04 nm) |
| Maximum Power - 1,700 Rpm - Sae J1995 | 425.00 hp (316.93 kw) |
| Note (1) | The power ratings apply at the stated speed when tested under the reference conditions for the specified standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment. |
| Note (3) | The gross power advertised is with the fan at maximum speed. |
| Peak Gross Torque - 1,200 Rpm - Sae J1995 | 1,627.00 lbs ft (2,205.89 nm) |
| Stroke | 6.20 in (15.75 cm) |
| Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise | 1.7 s |
|---|---|
| Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down | 3.1 s |
| Hydraulic Cycle Time - Rated Payload - Raise From Carry Position | 5.3 s |
| Hydraulic Cycle Time - Rated Payload - Total | 10.1 s |
| Hydraulic Cycle Time - Total | 10.1 s |
| Implement Pump Type | Variable Displacement Piston |
| Implement System - Maximum Operating Pressure | 4975 psi |
| Implement System - Maximum Pump Output At 2,250 Rpm | 119.00 gpm (450.42 lpm) |
| Implement System - Optional 3rd Function Maximum Flow | 63.00 gpm (238.46 lpm) |
| Implement System - Optional 3rd Function Maximum Pressure | 3159 psi |
| Pump Flow Capacity | 119.00 gpm (450.42 lpm) |
| Relief Valve Setting | 4975 psi |
| Breakout Force | 50,357.00 lbs (22,841.58 kg) |
|---|---|
| Note | Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Note (1) | For a machine configuration as defined under ?Weight.? |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6. |
| Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection | 45,847.00 lbs (20,795.88 kg) |
| Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection | 43,133.00 lbs (19,564.82 kg) |
| Cooling System Fluid Capacity | 12.00 gal (45.42 l) |
|---|---|
| Front Axle/Diff Fluid Capacity | 22.00 gal (83.27 l) |
| Fuel Capacity | 112.50 gal (425.81 l) |
| Hydraulic System Fluid Capacity | 40.00 gal (151.40 l) |
| Operating Weight | 66,337.00 lbs (30,089.99 kg) |
| Rear Axle/Diff Fluid Capacity | 22.00 gal (83.27 l) |
| Transmission Fluid Capacity | 20.30 gal (76.84 l) |
| Cooling System | 14.00 gal (52.99 l) |
|---|---|
| Crankcase | 9.80 gal (37.09 l) |
| Def Tank | 5.50 gal (20.82 l) |
| Differential - Final Drives - Front | 22.00 gal (83.27 l) |
| Differential - Final Drives - Rear | 22.00 gal (83.27 l) |
| Fuel Tank | 112.50 gal (425.81 l) |
| Hydraulic Tank | 40.00 gal (151.40 l) |
| Transmission | 20.30 gal (76.84 l) |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
|---|---|
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (2) | **For machines in European Union countries and in countries that adopt the ?EU Directives.? |
| Note (3) | ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
| With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)** | 109 LWA*** |
| With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)** | 72 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008) | 112 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013) | 78 dB(A)* |
| With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008) | 75 dB(A) |
| Exterior Sound Power Level - Iso 6395:2008* | 112 dB(A) |
|---|---|
| Exterior Sound Pressure Level - Sae J88:2013** | 78 dB(A) |
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value. |
| Operator Sound Pressure Level - Iso 6396:2008 | 75 dB(A) |
| Exterior Sound Power Level - Iso 6395:2008* | 112 dB(A) |
|---|---|
| Exterior Sound Pressure Level - Sae J88:2013** | 78 dB(A) |
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value. |
| Operator Sound Pressure Level - Iso 6396:2008 | 72 dB(A) |
| Forward - 1 | 4.30 mph (6.92 kph) |
|---|---|
| Forward - 2 | 8.30 mph (13.36 kph) |
| Forward - 3 | 14.60 mph (23.50 kph) |
| Forward - 4 | 24.50 mph (39.43 kph) |
| Max Speed - Forward | 24.50 mph (39.43 kph) |
| Max Speed - Reverse | 24.50 mph (39.43 kph) |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius. |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Reverse - 1 | 4.80 mph (7.72 kph) |
| Reverse - 2 | 9.40 mph (15.13 kph) |
| Reverse - 3 | 16.70 mph (26.88 kph) |
| Reverse - 4 | 24.50 mph (39.43 kph) |
| Note | Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) GP bucket with BOCE. |
|---|---|
| Note (1) | For 5.4 m3 (7.1 yd3) general purpose buckets with BOCE. |
| Note (2) | Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) general purpose bucket with BOCE. |
| Operating Weight | 66,337.00 lbs (30,089.99 kg) |