Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 986K Wheel Loader is a powerful and efficient machine designed for heavy-duty applications. With a bucket capacity range of up to 13.5 cubic yards, a Cat C15 ACERT engine delivering 449 horsepower, and hydraulic systems designed for optimal performance, this wheel loader is built to tackle the toughest jobs with ease. Featuring a robust transmission, advanced braking system, and high lift capabilities, the 986K is a reliable and versatile choice for handling material in construction, mining, and other demanding environments.
| Breakout Force | 72,620 lbf - Starting 2023 |
|---|---|
| Bucket Capacity | 6.5 - 13.5 (5.0 - 10.3) - Starting 2019 |
| Engine | C15 - Starting 2023 |
| Engine Power | 373.00 hp (278.15 kw) - Starting 2019 |
| Engine type | Cat C15 - Starting 2024 |
| Full-Turn Tipping Load | 55,572 lb - Starting 2023 |
| Max Dump Height | 10.10 ft (3.08 m) - Starting 2019 |
| Net Power | 373.00 hp (278.15 kw) - Starting 2021 |
| Operating Weight | 98,806.00 lbs (44,817.70 kg) - Starting 2019 |
| Tip Load | 63,404.00 lbs (28,759.61 kg) - Starting 2024 |
| Travel Speed | 24 / 25.4 mph - Starting 2024 |
| Travel Speed(Fwd/Rev) | 24 / 25.4 mph - Starting 2021 |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
|---|
| Front | Fixed |
|---|---|
| Oscillation Angle | 12.5 degrees |
| Oscillation Angle - Chain Arrangement | 8.5 degrees |
| Rear | Trunnion |
| Brakes | ISO 3450:2011 |
|---|
| Bucket Capacities | 5-10.3 m (6.5-13.5 yd) |
|---|
| Height | 13.50 ft (4.11 m) |
|---|---|
| Length | 38.00 ft (11.58 m) |
| Weight | 98,806.00 lbs (44,817.70 kg) |
| Width | 11.75 ft (3.58 m) |
| B-Pin Height - Maximum Lift | 17.60 ft (5.36 m) |
|---|---|
| Clearance At Maximum Lift | 11.60 ft (3.54 m) |
| Front Axle Centerline To Bucket Tip | 15.30 ft (4.66 m) |
| Ground To Center Of Front Axle | 3.20 ft (0.98 m) |
| Ground To Fuel Tank Clearance | 2.30 ft (0.70 m) |
| Ground To Lower Hitch Clearance | 1.50 ft (0.46 m) |
| Ground To Top Of Exhaust Stacks | 13.30 ft (4.05 m) |
| Ground To Top Of Hood | 10.70 ft (3.26 m) |
| Ground To Top Of Rops | 13.50 ft (4.11 m) |
| Maximum Overall Height - Bucket Raised | 23.90 ft (7.28 m) |
| Maximum Overall Length | 38.00 ft (11.58 m) |
| Note | <ul><li>All dimensions are approximate.</li><li>Specs are calculated with a 6.1 m (8.0 yd) rock bucket.</li></ul> |
| Reach - Maximum Lift | 7.40 ft (2.26 m) |
| Rear Axle - Centerline To Bumper | 10.30 ft (3.14 m) |
| Wheel Base | 12.50 ft (3.81 m) |
| B-Pin Height - Maximum Lift | 16.10 ft (4.91 m) |
|---|---|
| Clearance At Maximum Lift | 10.10 ft (3.08 m) |
| Front Axle Centerline To Bucket Tip | 13.80 ft (4.21 m) |
| Ground To Center Of Front Axle | 3.20 ft (0.98 m) |
| Ground To Fuel Tank Clearance | 2.30 ft (0.70 m) |
| Ground To Lower Hitch Clearance | 1.50 ft (0.46 m) |
| Ground To Top Of Exhaust Stacks | 13.30 ft (4.05 m) |
| Ground To Top Of Hood | 10.70 ft (3.26 m) |
| Ground To Top Of Rops | 13.50 ft (4.11 m) |
| Maximum Overall Height - Bucket Raised | 22.40 ft (6.83 m) |
| Maximum Overall Length | 36.60 ft (11.16 m) |
| Note | <ul><li>All dimensions are approximate.</li><li>Specs are calculated with a 6.1 m (8.0 yd) rock bucket.</li></ul> |
| Reach - Maximum Lift | 7.10 ft (2.16 m) |
| Rear Axle - Centerline To Bumper | 10.30 ft (3.14 m) |
| Wheel Base | 12.50 ft (3.81 m) |
| Bore | 5.40 in (13.72 cm) |
|---|---|
| Displacement | 927.00 cu in (15,190.84 cu cm) |
| Emissions | Tier 4 Final/Stage IV, or China Nonroad StageIII and Brazil MAR-1 equivalent to Tier 3 andStage IIIA |
| Engine Model | Cat C15 ACERT |
| Gross Power - Iso 14396 | 449.00 hp (334.82 kw) |
| Net Power | 373.00 hp (278.15 kw) |
| Peak Power Speed - 1,600 Rpm - Iso 14396 | 449.00 hp (334.82 kw) |
| Peak Power Speed - 1,600 Rpm - Iso 14396 (Din) | 455.00 hp (339.30 kw) |
| Peak Power Speed - 1,600 Rpm - Sae J1995 | 456.00 hp (340.04 kw) |
| Peak Power Speed - 1,600 Rpm - Sae J1995 (Din) | 462.00 hp (344.52 kw) |
| Peak Torque - 1,200 Rpm - Sae J1995 | 1,778.00 lbs ft (2,410.61 nm) |
| Rated Speed - 2,000 Rpm - Eec 80/1269 | 373.00 hp (278.15 kw) |
| Rated Speed - 2,000 Rpm - Eec 80/1269 (Din) | 378.00 hp (281.88 kw) |
| Rated Speed - 2,000 Rpm - Iso 9249 | 373.00 hp (278.15 kw) |
| Rated Speed - 2,000 Rpm - Iso 9249 (Din) | 378.00 hp (281.88 kw) |
| Rated Speed - 2,000 Rpm - Sae J1349 | 373.00 hp (278.15 kw) |
| Rated Speed - 2,000 Rpm - Sae J1349 (Din) | 378.00 hp (281.88 kw) |
| Stroke | 6.80 in (17.27 cm) |
| Torque Rise | 16 % |
| Dump | 3.5 s |
|---|---|
| Lower | 5.2 s |
| Lower Float Down | 4.3 s |
| Rack Back | 4.5 s |
| Raise | 9 s |
| Total Hydraulic Cycle Time | 21.3 s |
| Lift Cylinder - Bore | 7.50 in (19.05 cm) |
|---|---|
| Lift Cylinder - Stroke | 45.00 in (114.30 cm) |
| Lift/Tilt System - Circuit | Load Sense |
| Lift/Tilt System - Pump | 2 110 cc variable displacement |
| Maximum Flow At 2,165 Rpm | 123.00 gpm (465.56 lpm) |
| Relief Valve Setting - Lift/Tilt | 4050 psi |
| Tilt Cylinder - Bore | 6.70 in (17.02 cm) |
| Tilt Cylinder - Stroke | 28.40 in (72.14 cm) |
| Iso 5010:2007 - Maximum Flow At 1,400 Rpm | 52.00 gpm (196.82 lpm) |
|---|---|
| Iso 5010:2007 - Steering Cutoff Pressure | 4000 psi |
| Iso 5010:2007 - Steering System - Circuit | Load Sense |
| Iso 5010:2007 - Steering System - Pump | Piston, variable displacement |
| Iso 5010:2007 - Total Steering Angle | 70 degrees |
| Bucket Capacity Range | 5-10.3 m (6.5-13.5 yd) |
|---|---|
| Cat Truck Match - High Lift | 772/773 |
| Cat Truck Match - Standard | 770/735/740/745 |
| Operating Weight - High Lift | 104,005.00 lbs (47,175.93 kg) |
| Operating Weight - Standard | 97,785.00 lbs (44,354.58 kg) |
| Rated Payload - High Lift (Loose Material) | 24,200.00 lbs (10,976.95 kg) |
| Rated Payload - High Lift (Quarry Face) | 22,000.00 lbs (9,979.04 kg) |
| Rated Payload - Loose Material (High Lift) | 24,200.00 lbs (10,976.95 kg) |
| Rated Payload - Loose Material (Standard) | 28,000.00 lbs (12,700.60 kg) |
| Rated Payload - Quarry Face | 22,000.00 lbs (9,979.04 kg) |
| Rated Payload - Standard (Loose Material) | 28,000.00 lbs (12,700.60 kg) |
| Rated Payload - Standard (Quarry Face) | 22,000.00 lbs (9,979.04 kg) |
| Operating Weight | 98,806.00 lbs (44,817.70 kg) |
|---|
| Rops/Fops | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
|---|
| Axle Oil - Differentials And Final Drives - Front | 49.00 gal (185.47 l) |
|---|---|
| Axle Oil - Differentials And Final Drives - Rear | 45.00 gal (170.33 l) |
| Cooling Systems | 26.00 gal (98.41 l) |
| Crankcase | 9.00 gal (34.07 l) |
| Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage Iv Only) | 6.00 gal (22.71 l) |
| Fuel Tank | 141.00 gal (533.69 l) |
| Fuel Tank - Short Lift | 127.00 gal (480.70 l) |
| Hydraulic System - Tank Only | 34.00 gal (128.69 l) |
| Hydraulic System Factory Fill | 87.00 gal (329.30 l) |
| Transmission | 20.00 gal (75.70 l) |
| Machine Sound Level (Iso 6395) | 112 dB(A) |
|---|---|
| Note | <ul><li>The operator sound pressure level was measured according to thetest procedures and conditions specified in ISO 6396:2008. Themeasurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to thetest procedures and |
| Operator Sound Level (Iso 6396) | 72 dB(A) |
| Machine Sound Level (Iso 6395) | 110 dB(A) |
|---|---|
| Note | <ul><li>The operator sound pressure level was measured according to thetest procedures and conditions specified in ISO 6396:2008. Themeasurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to thetest procedures and |
| Operator Sound Level (Iso 6396) | 72 dB(A) |
| Direct Drive - Forward 2 | 8.00 mph (12.87 kph) |
|---|---|
| Direct Drive - Forward 3 | 14.00 mph (22.53 kph) |
| Direct Drive - Forward 4 | 24.00 mph (38.62 kph) |
| Direct Drive - Reverse 2 | 9.00 mph (14.48 kph) |
| Direct Drive - Reverse 3 | 16.00 mph (25.75 kph) |
| Direct Drive - Reverse 4 | 25.40 mph (40.88 kph) |
| Forward - 1 | 5.00 mph (8.05 kph) |
| Forward - 2 | 8.00 mph (12.87 kph) |
| Reverse - 1 | 5.00 mph (8.05 kph) |
| Reverse - 2 | 8.00 mph (12.87 kph) |
| Transmission Type | Cat Planetary Power Shift |