Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Front | Fixed |
Maximum Single-Wheel Rise and Fall | 22.4 in (57 cm) |
Rear | Oscillating 13 degrees |
Breakout Force | 85068 lbs (38,587 kg) |
Bucket Capacities | 10 cu yd (8 cu m) |
Bucket Capacity - heaped | 8.4 cu yd (6 cu m) |
Bucket Capacity - struck | 6.9 cu yd (5 cu m) |
Bucket Width | 12.5 ft (4 m) |
Maximum Bucket Capacity | 10 cu yd (8 cu m) |
Cab - ROPS/FOPS | Meets SAE and ISO standards |
Sound Performance | Meets ANSI, SAE and ISO standards |
Height - Top of Cab | 13.5 ft (4 m) |
Height - Top of Exhaust | 13.5 ft (4 m) |
Hinge Pin - Max Height | 19.2 ft (6 m) |
Length with Bucket on Ground | 40.1 ft (12 m) |
Reach at Max Lift and Dump | 6.7 ft (2 m) |
Wheel Base Length | 15 ft (5 m) |
Wheelbase | 14.9 ft (5 m) |
Width Over Tires | 11.8 ft (4 m) |
Bore | 5.7 in (14 cm) |
Displacement | 1104.5 cu in (0 cu m) |
Engine Model | Cat C18 ACERT |
Flywheel Power | 501 hp (374 kw) |
Gross Power | 555 hp (414 kw) |
Gross Power - ISO 3046-2 | 520 hp (388 kw) |
Make | Cat |
Net Power - EEC 80/1269 | 501 hp (374 kw) |
Net Power - ISO 9249 | 501 hp (374 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Stroke | 7.2 in (18 cm) |
Dump | 2.4 seconds |
Raise | 9.4 seconds |
Total Hydraulic Cycle Time | 15.6 seconds |
Dump Time | 2.4 seconds |
Lower Time | 3.8 seconds |
Pump Flow Capacity | 130 gpm (492 lpm) |
Raise Time | 9.4 seconds |
Relief Valve Setting | 4500 psi |
Relief Valve Setting | 5075 psi |
Relief Valve Setting - Low Idle | 348.1 psi |
Alternator Supplied Amperage | 100 amps |
Cooling System Fluid Capacity | 27.2 gal (103 l) |
Engine Oil Fluid Capacity | 15.9 gal (60 l) |
Front Axle/Diff Fluid Capacity | 49 gal (185 l) |
Fuel Capacity | 188 gal (712 l) |
Hinge Pin Height, Unloaded | 16.2 ft (5 m) |
Hydraulic System Fluid Capacity | 70.5 gal (267 l) |
Operating Voltage | 24 volts |
Rated Payload | 27557.8 lbs (12,500 kg) |
Rear Axle Oscillation | 26 degrees |
Rear Axle/Diff Fluid Capacity | 49 gal (185 l) |
Static Tipping Weight | 76776 lbs (34,825 kg) |
Tire Size | 35/65 |
Transmission Fluid Capacity | 18.5 gal (70 l) |
Turning Radius | 28 ft (9 m) |
Cooling System | 27.2 gal (103 l) |
Crankcase | 15.9 gal (60 l) |
Differential - Final Drives - Front | 49 gal (185 l) |
Differential - Final Drives - Rear | 49 gal (185 l) |
Fuel Tank | 188 gal (712 l) |
Hydraulic System - Tank Only | 70.5 gal (267 l) |
Hydraulic System Factory Fill | 124.2 gal (470 l) |
Transmission | 18.5 gal (70 l) |
Steering | Meets SAE and ISO standards |
Converter Drive - Forward 1 | 4.2 mph (7 kph) |
Converter Drive - Forward 2 | 7.3 mph (12 kph) |
Converter Drive - Forward 3 | 12.9 mph (21 kph) |
Converter Drive - Reverse 1 | 4.7 mph (8 kph) |
Converter Drive - Reverse 2 | 8.4 mph (14 kph) |
Converter Drive - Reverse 3 | 14.7 mph (24 kph) |
Direct Drive - Forward 2 | 7.7 mph (12 kph) |
Direct Drive - Forward 3 | 13.6 mph (22 kph) |
Direct Drive - Forward 4 | 24 mph (39 kph) |
Direct Drive - Reverse 1 | 4.9 mph (8 kph) |
Direct Drive - Reverse 2 | 8.8 mph (14 kph) |
Direct Drive - Reverse 3 | 15.6 mph (25 kph) |
Max Speed - Forward | 24 mph (39 kph) |
Max Speed - Reverse | 15.6 mph (25 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 3 |
Operating Weight | 128328 lbs (58,209 kg) |