All Equipment Category Specs ↠ Wheel Loaders ↠ Caterpillar 990 II

Caterpillar 990 II Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 990 II (See all Caterpillar 990 II for sale)

Axles

Front	Fixed
Maximum Single-Wheel Rise and Fall	23 in (57 cm)
Oscillation Angle	11 degrees
Rear	Trunnion

Brakes

Meet SAE/ISO 3450 1996.

Bucket

Breakout Force	63,066 lbs (28,606 kg)
Bucket Capacities	11-12 cu yd (8-9 cu m)
Bucket Capacity - heaped	11 cu yd (8 cu m)
Bucket Capacity - struck	9 cu yd (7 cu m)
Bucket Width	15 ft (4 m)
Dump Clearance at Max Raise	13 ft (4 m)
Maximum Bucket Capacity	12 cu yd (9 cu m)

Cab

Cab - ROPS/FOPS	Meets SAE and ISO standards.
Sound Performance	Meets ANSI, SAE and ISO standards.

Dimensions

Height - Top of Exhaust	16 ft (5 m)
Hinge Pin Height at Full Lift	19 ft (6 m)
Length with Bucket on Ground	41 ft (13 m)
Overall Length	42 ft (13 m)
Reach at Max Lift and Dump	6 ft (2 m)
Reach at Maximum Lift/Dump	8 ft (3 m)
Wheel Base Length	15 ft (5 m)
Width Over Tires	14 ft (4 m)

Engine

Bore	5 in (14 cm)
Displacement	1,648 cu in (27,001 cu cm)
Engine Model	Cat 3412E TA
Net Power	625 hp (466 kw)
Net Power - EEC 80/1269	625 hp (466 kw)
Net Power - ISO 9249	625 hp (466 kw)
Net Power - SAE J1349	618 hp (461 kw)
Stroke	6 in (15 cm)

Hydraulic Cycle Times

Dump	2.9 seconds
Raise	9.2 seconds
Total Hydraulic Cycle Time	15.9 seconds

Hydraulic System

Dump Time	2.9 seconds
Lower Time	3.8 seconds
Raise Time	9.2 seconds

Hydraulic System - Lift/Tilt

Number of Lift Cylinders	2
Number of Tilt Cylinders	1

Loader Hydraulic System

Cylinders, Double Acting - Lift, Bore and Stroke	234 mm x 1270 mm 9.25 in x 50 in
Cylinders, Double Acting - Tilt, Bore and Stroke	292 mm x 820 mm 11.5 in x 32.3 in
Relief Valve Setting	4500 psi
Relief Valve Setting - Low Idle	350 psi

Operating Specifications

Articulation Angle	35 degrees
Breakout Force	137,841 lbs (62,524 kg)
Bucket Capacity Range	8.4-9.2 m3 11-12 yd3
Dump Clearance	15 ft (5 m)
Fuel Capacity	256 gal (970 l)
Hydraulic System Fluid Capacity	115 gal (435 l)
Operating Weight	162,018 lbs (73,490 kg)
Rated Payload	33,000 lbs (14,969 kg)
Static Tipping Load - Full Turn	108,892 lbs (49,393 kg)
Static Tipping Weight	90,293 lbs (40,956 kg)

Service Refill Capacities

Cooling System	50 gal (190 l)
Crankcase	25 gal (95 l)
Differential - Final Drives - Front	72 gal (271 l)
Differential - Final Drives - Rear	69 gal (261 l)
Fuel Tank	413 gal (1,563 l)
Hydraulic System - Lift/Tilt and Brakes	113 gal (428 l)
Hydraulic System - Steering and Engine Cooling Fan	51 gal (191 l)
Hydraulic System - Tank Only	46 gal (174 l)
Transmission	29 gal (110 l)

Steering System

Minimum Turning Radius - Over Bucket	407 in (1,034 cm)
Steering Angle - Each Direction	35 degrees

Transmission

Converter Drive - Forward 1	4 mph (7 kph)
Converter Drive - Forward 2	8 mph (12 kph)
Converter Drive - Forward 3	13 mph (21 kph)
Converter Drive - Reverse 1	5 mph (8 kph)
Converter Drive - Reverse 2	8 mph (13 kph)
Converter Drive - Reverse 3	14 mph (23 kph)
Direct Drive - Forward 1	Lock-up disabled
Direct Drive - Forward 2	8 mph (13 kph)
Direct Drive - Forward 3	14 mph (22 kph)
Direct Drive - Reverse 1	5 mph (8 kph)
Direct Drive - Reverse 2	9 mph (14 kph)
Direct Drive - Reverse 3	15 mph (25 kph)
Forward - 1	4 mph (7 kph)
Forward - 2	8 mph (13 kph)
Forward - 3	14 mph (23 kph)
Max Speed - Forward	14 mph (23 kph)
Max Speed - Reverse	16 mph (25 kph)
Number of Forward Gears	3
Number of Reverse Gears	3
Reverse - 1	5 mph (8 kph)
Reverse - 2	9 mph (14 kph)
Reverse - 3	16 mph (25 kph)
Transmission Type	Powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon