Caterpillar 990H Steel Mill Arrangement Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 990H Steel Mill Arrangement ➔

Axles

Caterpillar 990H Steel Mill Arrangement Wheel Loader Axles specifications
Front	Fixed
Maximum Single-Wheel Rise And Fall	22.50 in (57.15 cm)
Oscillation Angle	11 degrees
Rear	Oscillating

Brakes

Caterpillar 990H Steel Mill Arrangement Wheel Loader Brakes specifications
Brakes	Meet SAE/ISO 3450:1996

Buckets

Caterpillar 990H Steel Mill Arrangement Wheel Loader Buckets specifications
Bucket Capacities	8.4-9.2 m3 (11-12 yd3)

Cab

Caterpillar 990H Steel Mill Arrangement Wheel Loader Cab specifications
Cab - Rops/Fops	Meets SAE and ISO standards
Sound Performance	Meets ANSI, SAE and ISO standards

Engine

Caterpillar 990H Steel Mill Arrangement Wheel Loader Engine specifications
Bore	5.40 in (13.72 cm)
Displacement	1,666.00 cu in (27,300.91 cu cm)
Engine Model	Cat C27 ACERT
Flywheel Power	627.00 hp (467.56 kw)
Gross Power	687.00 hp (512.30 kw)
Gross Power - Iso 3046-2	627.00 hp (467.56 kw)
Net Power	627.00 hp (467.56 kw)
Net Power - Eec 80/1269	627.00 hp (467.56 kw)
Net Power - Iso 9249	627.00 hp (467.56 kw)
Stroke	6.00 in (15.24 cm)

Loader Hydraulic System - Smash

Caterpillar 990H Steel Mill Arrangement Wheel Loader Loader Hydraulic System - Smash specifications
Cylinders, Double Acting - Lift, Bore And Stroke	254 mm 1264 mm (10 in 49.75 in)
Cylinders, Double Acting - Tilt, Bore And Stroke	317.5 mm 819 mm (12.5 in 32.2 in)
Main Hydraulic System Output At 2,128 Rpm And 6900 Kpa (1,000 Psi)	172.00 gpm (651.02 lpm)
Pilot System, Gear-Type Pump Output At 2,000 Rpm And 6900 Kpa (1,000 Psi)	12.00 gpm (45.42 lpm)
Relief Valve Setting	4500 psi
Relief Valve Setting - Low Idle	350 psi

Operating Specifications

Caterpillar 990H Steel Mill Arrangement Wheel Loader Operating Specifications specifications
Attachment Type	12 yd3 Rock Bucket
Breakout Force - Sae Rated	135,429.00 lbs (61,429.64 kg)
Breakout Force - Smash - Sae Rated	162,400.00 lbs (73,663.49 kg)
Hinge Pin Height, Unloaded	19.30 ft (5.88 m)
Operating Weight - Smash	190,640.00 lbs (86,472.96 kg)
Overall Length	42.10 ft (12.83 m)
Tipping Load - Articulated 43 Degrees	90,637.00 lbs (41,112.30 kg)
Tipping Load - Articulated 43 Degrees - Smash	123,347.00 lbs (55,949.33 kg)
Tipping Load - Straight	101,260.00 lbs (45,930.82 kg)
Tipping Load - Straight - Smash	148,779.00 lbs (67,485.10 kg)
Turning Radius - Sae Carry	33.90 ft (10.33 m)

Operational

Caterpillar 990H Steel Mill Arrangement Wheel Loader Operational specifications
Operating Weight	172,270.00 lbs (78,140.45 kg)

Service Refill Capacities

Caterpillar 990H Steel Mill Arrangement Wheel Loader Service Refill Capacities specifications
Cooling System	50.20 gal (190.01 l)
Crankcase	25.00 gal (94.63 l)
Differential - Final Drives - Front	71.60 gal (271.01 l)
Differential - Final Drives - Rear	68.90 gal (260.79 l)
Fuel Tank	284.00 gal (1,074.94 l)
Hydraulic System - Including Tank	115.00 gal (435.28 l)
Hydraulic System - Lift/Tilt And Brakes	113.00 gal (427.71 l)
Hydraulic System - Steering And Engine Cooling Fan	50.50 gal (191.14 l)
Hydraulic System - Tank Only	46.00 gal (174.11 l)
Transmission	29.00 gal (109.77 l)

Steering

Caterpillar 990H Steel Mill Arrangement Wheel Loader Steering specifications
Steering	Meets SAE and ISO standards
Total Steering Angle	70 degrees

Transmission

Caterpillar 990H Steel Mill Arrangement Wheel Loader Transmission specifications
Converter Drive - Forward 1	4.30 mph (6.92 kph)
Converter Drive - Forward 2	7.50 mph (12.07 kph)
Converter Drive - Forward 3	12.90 mph (20.76 kph)
Converter Drive - Reverse 1	4.80 mph (7.72 kph)
Converter Drive - Reverse 2	8.30 mph (13.36 kph)
Converter Drive - Reverse 3	14.20 mph (22.85 kph)
Direct Drive - Forward 1	Lock-up disabled
Direct Drive - Forward 2	7.90 mph (12.71 kph)
Direct Drive - Forward 3	13.90 mph (22.37 kph)
Direct Drive - Reverse 1	4.90 mph (7.89 kph)
Direct Drive - Reverse 2	8.80 mph (14.16 kph)
Direct Drive - Reverse 3	15.40 mph (24.78 kph)

Weights

Caterpillar 990H Steel Mill Arrangement Wheel Loader Weights specifications
Operating Weight	172,270.00 lbs (78,140.45 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon