Caterpillar 992G Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 992G ➔

The Caterpillar 992G is a large wheel loader designed for high-production loading in mining, quarry, and heavy construction applications. Built by Caterpillar, the 992G features a robust frame, high-capacity bucket options, and a powertrain engineered for material handling in demanding conditions. It is commonly used for loading haul trucks, stockpiling aggregate, and moving bulk material. The machine is known for its articulated steering, operator cab visibility, and service access designed to support maintenance in heavy-duty environments. As a Caterpillar wheel loader, the 992G is part of the company's large production loader lineup for continuous material movement.

Axles

Caterpillar 992G Wheel Loader Axles specifications
Front	Fixed
Maximum Single-Wheel Rise And Fall	24.80 in (62.99 cm)
Oscillation Angle	10 degrees
Rear	Trunnion

Bucket

Caterpillar 992G Wheel Loader Bucket specifications
Breakout Force	138,360.00 lbs (62,759.12 kg)
Bucket Capacity - Heaped	15 cu yd
Bucket Capacity - Struck	12.36 cu yd
Bucket Width	15.83 ft (4.82 m)
Dump Clearance At Max Raise	15.17 ft (4.62 m)

Buckets

Caterpillar 992G Wheel Loader Buckets specifications
Bucket Capacities	11.5-12.3 m3 15-16 yd3
Bucket Width	15.90 ft (4.85 m)
Maximum Bucket Capacity	16 cu yd

Cab

Caterpillar 992G Wheel Loader Cab specifications
Air Conditioning	Standard

Dimensions

Caterpillar 992G Wheel Loader Dimensions specifications
Ground Clearance	2.25 ft (0.69 m)
Height	18.25 ft (5.56 m)
Height To Top Of Cab	18.33 ft (5.59 m)
Hinge Pin - Max Height	22.75 ft (6.93 m)
Length	51.17 ft (15.60 m)
Length With Bucket On Ground	51.17 ft (15.60 m)
Reach At Max Lift And Dump	7.58 ft (2.31 m)
Weight	209,278.00 lbs (94,927.02 kg)
Wheelbase	19.33 ft (5.89 m)
Width	14.67 ft (4.47 m)
Width Over Tires	14.82 ft (4.52 m)

Dimensions*

Caterpillar 992G Wheel Loader Dimensions* specifications
Bucket Pivot - Maximum Lift - Std	22.77 ft (6.94 m)
Clearance At Maximum Lift/Dump - Std	18.40 ft (5.61 m)
Dump Clearance At Full Lift And 45 Degrees Dump - Hl	17.22 ft (5.25 m)
Dump Clearance At Full Lift And 45 Degrees Dump - Std	15.18 ft (4.63 m)
Full Turn Static Tipping Load At 40 Degrees - Hl	111,818.33 lbs (50,720.00 kg)
Full Turn Static Tipping Load At 43 Degrees	113,299.83 lbs (51,392.00 kg)
Ground Clearance	2.27 ft (0.69 m)
Height - Top Of Exhaust Stack	17.18 ft (5.24 m)
Height - Top Of Hood	13.07 ft (3.98 m)
Height - Top Of Rops/Fops	18.34 ft (5.59 m)
Hinge Pin Height At Full Lift - Std	22.77 ft (6.94 m)
Length - Rear Axle To Bumper	13.76 ft (4.19 m)
Overall Height - Bucket Raised - Std	30.89 ft (9.42 m)
Overall Height - With Bucket Raised	30.89 ft (9.42 m)
Overall Length - Hl	53.23 ft (16.22 m)
Overall Length - Std	51.30 ft (15.64 m)
Reach At Full Lift And 45 Degrees Dump - Hl	7.56 ft (2.30 m)
Reach At Full Lift And 45 Degrees Dump - Std	7.60 ft (2.32 m)
Reach At Maximum Lift/Dump - Std	7.81 ft (2.38 m)
Straight Static Tipping Load - Hl	129,395.76 lbs (58,693.00 kg)
Straight Static Tipping Load - Std	132,920.96 lbs (60,292.01 kg)
Turning Circle - Hl	75.05 ft (22.88 m)
Turning Circle - Std	73.07 ft (22.27 m)
Wheel Base Length	19.32 ft (5.89 m)
Width - Over Tires	14.82 ft (4.52 m)

Engine

Caterpillar 992G Wheel Loader Engine specifications
Aspiration	twin turbocharged
Bore	6.70 in (17.02 cm)
Displacement	2,105.40 cu in (34,501.40 cu cm)
Engine Make	2236
Engine Model	3508B DITA EUI
Gross Power	880.00 hp (656.23 kw)
Net Power	800.00 hp (596.57 kw)
Net Power - Caterpillar	800.60 hp (597.02 kw)
Number Of Cylinders	8
Power Measured @	1750 rpm
Rated Speed	1750 rpm
Stroke	7.50 in (19.05 cm)
Torque Measured @	1300 rpm
Torque Rise	30 %

Hydraulic Cycle Times

Caterpillar 992G Wheel Loader Hydraulic Cycle Times specifications
Dump	3.3 s
Lower Float Down - Empty	3.47 s
Raise	9.12 s
Total Hydraulic Cycle Time	15.9 s

Hydraulic System

Caterpillar 992G Wheel Loader Hydraulic System specifications
Dump Time	3.3 sec
Lower Time	3.5 sec
Raise Time	9.2 sec
Relief Valve Setting	4500 psi

Operating Specifications

Caterpillar 992G Wheel Loader Operating Specifications specifications
Articulation Angle	43 degrees
Breakout Force	237,825.00 lbs (107,875.74 kg)
Cat Truck Match - Standard	777D
Dump Clearance	19.00 ft (5.79 m)
Rated Payload	42,920.00 lbs (19,468.21 kg)
Rated Payload - Standard	42,920.00 lbs (19,468.21 kg)
Static Tipping Load - Full Turn	112,777.00 lbs (51,154.85 kg)
Travel Speed	14.50 mph (23.34 kph)

Operational

Caterpillar 992G Wheel Loader Operational specifications
Alternator Supplied Amperage	100 amps
Cooling System Fluid Capacity	53.90 gal (204.01 l)
Engine Oil Fluid Capacity	26.50 gal (100.30 l)
Front Axle/Diff Fluid Capacity	91.00 gal (344.44 l)
Fuel Capacity	413.00 gal (1,563.21 l)
Hydraulic System Fluid Capacity	84.80 gal (320.97 l)
Operating Voltage	24 V
Operating Weight	209,278.00 lbs (94,927.02 kg)
Rear Axle Oscillation	20 degrees
Rear Axle/Diff Fluid Capacity	86.00 gal (325.51 l)
Static Tipping Weight	132,921.00 lbs (60,292.03 kg)
Tire Size	45/65 50 ply
Transmission Fluid Capacity	44.60 gal (168.81 l)
Turning Radius	36.50 ft (11.13 m)

Service Refill Capacities

Caterpillar 992G Wheel Loader Service Refill Capacities specifications
Cooling System	76.70 gal (290.31 l)
Crankcase	27.00 gal (102.20 l)
Differential - Final Drives - Front	91.20 gal (345.19 l)
Differential - Final Drives - Rear	86.20 gal (326.27 l)
Fuel Tank	413.00 gal (1,563.21 l)
Hydraulic System - Including Tank	231.70 gal (876.98 l)
Hydraulic System - Tank Only	86.20 gal (326.27 l)
Hydraulic System Factory Fill	170.70 gal (646.10 l)
Transmission	44.70 gal (169.19 l)

Steering

Caterpillar 992G Wheel Loader Steering specifications
Minimum Turning Radius - Over Bucket	438.50 in (1,113.79 cm)
Relief Valve Setting	4496.17 psi
Steering	Articulation
Steering Angle - Each Direction	43 degrees

Transmission

Caterpillar 992G Wheel Loader Transmission specifications
Forward - 1	4.10 mph (6.60 kph)
Forward - 2	7.20 mph (11.59 kph)
Forward - 3	12.40 mph (19.96 kph)
Max Speed - Forward	13.50 mph (21.73 kph)
Max Speed - Reverse	14.90 mph (23.98 kph)
Number Of Forward Gears	3
Number Of Reverse Gears	3
Reverse - 1	4.60 mph (7.40 kph)
Reverse - 2	7.90 mph (12.71 kph)
Reverse - 3	13.70 mph (22.05 kph)
Transmission Type	Powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon