Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 992K is a large wheel loader designed for high-production material handling in mining, quarry, and heavy construction applications. It is part of Caterpillar's 992 series and is used for loading haul trucks, stockpiling aggregate, and moving bulk material in demanding environments. The 992K features a high-capacity bucket, articulated steering, and a powertrain built for sustained load-and-carry cycles. Operator comfort, service access, and machine durability are key design priorities. As a Wheel Loader, the Caterpillar 992K is commonly selected for large-scale earthmoving and material loading operations requiring strong breakout force and efficient cycle times.
| 1st | 7.4 4.6 - Starting 2015 |
|---|---|
| 2nd | 13.0 8.1 - Starting 2015 |
| 3rd | 22.4 13.9 - Starting 2015 |
| 3rd Speeds Reverse | 12.80 mph (20.60 km/h) - Starting 2015 |
| A Height to top of stack | 206.00 in (5.24 m) - Starting 2010 |
| Approx. Shipping Wt. | 214,535.00 lbs (97,294.00 kg) - Starting 2007 |
| B Height to top of engine - compartment | 157.00 in (4.00 m) - Starting 2012 |
| B Height to top of engine compartment | 157.00 in (4.00 m) - Starting 2010 |
| Bore | 5.70 in (145.00 mm) - Starting 2010 |
| Breakout force (§) | 118,520.00 lbf (53,760.00 kg) - Starting 2012 |
| Breakout force*** (§) | 118,520.00 lbf (527.21 kN) - Starting 2018 |
| Bucket Capacity | 9.7 - 19.5 (7.4 - 14.9) - Starting 2021 |
| Bucket Weight | 22,668.00 lbs (10,282.00 kg) - Starting 2013 |
| Bucket Width | 190.00-192.00 in (4,824.00-4,884.00 mm) |
| Bucket width (§) | 199.00 in (4,900.00 mm) - Starting 2012 |
| C Height to top of ROPS | 223.00 in (5.67 m) - Starting 2010 |
| D Hinge pin height at carry position | 48.00 in (1,209.00 mm) - Starting 2010 |
| Digging depth (segment) (§) | 7.00 in (181.00 mm) - Starting 2013 |
| Displacement | 1,959.00 cu in (32.10 L) - Starting 2012 |
| engine displacement | 1959 in3 mph (32.1 L km/h) - Starting 2010 |
| Dump clearance at full lift and - 45° discharge angle | 177.00 in (4.49 m) - Starting 2012 |
| Dump clearance at full lift SAE 45° discharge (§) | 187.00 in (4,741.00 mm) - Starting 2010 |
| Dump clearance at full lift SAE Tooth tip 45° discharge (§) | 201.00 in (5,112.00 mm) - Starting 2012 |
| Emission Level Rated Engine RPM | 1750 rpm - Starting 2012 |
| Engine Model | C32 ACERT** - Starting 2016 |
| Engine Power | 814.00 hp (607.01 kw) - Starting 2019 |
| Engine type | Cat C32 - Starting 2021 |
| F Hinge pin height at full lift | 272.00 in (6.92 m) - Starting 2010 |
| Flywheel Horse- power | 801.00 hp (597.32 kw) - Starting 2007 |
| Flywheel Power: Net | 801.00 hp (597.00 kW) - Starting 2010 |
| Fuel Tank Capacity | 425.00 US gal (1,610.00 L) - Starting 2010 |
| G Maximum overall height | 366.00 in (9.31 m) - Starting 2010 |
| Gross Rated Bucket Payload | 65,300.00 lbs (29,600.00 kg) - Starting 2010 |
| Gross Rated Bucket Payload - HL, EHL, SHL | 66,441.00 lbs (30,138.00 kg) - Starting 2012 |
| Gross Rated Bucket Payload - STD | 74,265.00 lbs (33,687.00 kg) - Starting 2012 |
| Gross Rated Bucket Payload: - HL | 66,441.00 lbs (30,138.00 kg) - Starting 2016 |
| Gross Rated Bucket Payload: - HL, EHL, SHL | 66,441.00 lbs (30,138.00 kg) - Starting 2015 |
| Gross Rated Bucket Payload: - STD | 74,265.00 lbs (33,687.00 kg) - Starting 2015 |
| Gross Rated Bucket Payload:* - HL | 66,441.00 lbs (30,138.00 kg) - Starting 2018 |
| Gross Rated Bucket Payload:* - STD | 74,265.00 lbs (33,687.00 kg) - Starting 2018 |
| Ground Clearance | 26.80 in (682.00 mm) - Starting 2010 |
| Ground clearance (std. tires) | 26.80 in (682.00 mm) - Starting 2010 |
| Ground Engaging Tools | K150/K170 - Starting 2012 |
| H Maximum digging depth | 8.00 in (196.00 mm) - Starting 2010 |
| H Maximum digging depth - J Machine center point to axle | 116.00 in (2.94 m) - Starting 2012 |
| H Maximum digging depth - K Wheel base | 232.00 in (5.89 m) - Starting 2012 |
| H Maximum digging depth - L Radius of tire | 54.00 in (1.37 m) - Starting 2012 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Dump | 1.8 sec - Starting 2010 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Lower (Empty, Float Down) | 3.7 sec - Starting 2010 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Raise | 9.4 sec - Starting 2010 |
| Hydraulic Cycle Time, - Rated Load in Bucket - Total | 14.9 sec - Starting 2010 |
| Hydraulic Systems - Lift, Tilt | 171.00 US gal (646.00 L) - Starting 2010 |
| Hydraulic Systems - Steering and Brakes | 61.00 US gal (231.00 L) - Starting 2010 |
| Hydraulic Systems - Tank Only | 42.00 US gal (159.00 L) - Starting 2010 |
| J Machine center point to axle | 116.00 in (2.94 m) - Starting 2010 |
| K Wheel base | 232.00 in (5.89 m) - Starting 2010 |
| L Radius of tire | 54.00 in (1.37 m) - Starting 2010 |
| Loader clearance circle with bucket in carry position (§) | 447.00 in (11,349.00 mm) - Starting 2012 |
| Loader clearance radius with bucket in carry position (§) | 447.00 in (11,349.00 mm) - Starting 2016 |
| M Maximum overall length | 626.00 in (15.90 m) - Starting 2012 |
| Max Dump Height | 14.80 ft (4.51 m) - Starting 2019 |
| Max. | 900.00 hp (671.00 kW) - Starting 2013 |
| Max. Reach at max. height | 366.00 in (9,313.00 mm) - Starting 2007 |
| Maximum Engine: Gross | 900.00 hp (671.00 kW) - Starting 2015 |
| Maximum Engine: Net | 814.00 hp (607.00 kW) - Starting 2015 |
| Maximum Forward Speed | 12.80 mph (20.60 km/h) - Starting 2007 |
| Maximum Reverse Speed | 13.90 mph (22.40 km/h) - Starting 2007 |
| N Reach at full lift | 96.00 in (2.43 m) - Starting 2012 |
| Net | 814.00 hp (607.00 kW) - Starting 2013 |
| Net Power | 814.00 hp (607.01 kw) - Starting 2012 |
| No. Cylinders | 12 - Starting 2010 |
| O Maximum rollback at maximum lift | 65 deg - Starting 2010 |
| Operating load at rated capacity | 42,000.00 lbs (19,051.00 kg) - Starting 2012 |
| Operating Weight | 220,089.00 lbs (99,830.82 kg) - Starting 2019 |
| Operating weight (§) | 221,699.00 lbs (100,561.00 kg) - Starting 2012 |
| Operating weight*** (§) | 221,699.00 lbs (100,561.00 kg) - Starting 2018 |
| Overall height with bucket at full raise (§) | 391.00 in (9,930.00 mm) - Starting 2012 |
| Overall length - bucket level ground (§) | 644.00 in (16,351.00 mm) - Starting 2012 |
| P Maximum rollback at carry height | 52.7 deg - Starting 2010 |
| Product Identification Prefix | ZMX 880 - Starting 2011 |
| Q Maximum rollback at ground | 43.4 deg - Starting 2010 |
| Rated bucket capacity (§) | 16.00 cu yd (12.30 cu m) - Starting 2012 |
| Rated Capacity | 14.00-16.00 cu yd (10.70-12.30 cu m) |
| Rated Engine RPM | 1750 rpm - Starting 2010 |
| Rated Payload - HL, EHL, SHL | 21.00 T (19.00 t) - Starting 2012 |
| Rated Payload - STD | 24.00 T (21.80 t) - Starting 2012 |
| Rated Payload: - HL, EHL, SHL | 21.00 T (19.00 t) - Starting 2015 |
| Rated Payload: - STD | 24.00 T (21.80 t) - Starting 2015 |
| Rated Payload:* - HL, EHL, SHL | 21.00 tons (19.00 tonnes) - Starting 2018 |
| Rated Payload:* - STD | 24.00 tons (21.80 tonnes) - Starting 2018 |
| Reach at full lift SAE 45° discharge (§) | 86.00 in (2,194.00 mm) - Starting 2010 |
| Reach at full lift SAE 45° Tooth tip discharge (§) | 90.00 in (2,294.00 mm) - Starting 2012 |
| Reach with boom horizontal and bucket level | 223.00 in (5,655.00 mm) - Starting 2012 |
| Remarks | 10.7 m3 /14 yd3 Bucket - Starting 2007 |
| Rock | Teeth Rock with Teeth - Starting 2012 |
| Speeds Forward - 1st | 4.40 mph (7.10 km/h) - Starting 2012 |
| Speeds Forward - 2nd | 7.60 mph (12.20 km/h) - Starting 2012 |
| Speeds Forward - 3rd | 12.80 mph (20.60 km/h) - Starting 2012 |
| Speeds Reverse - 1st | 4.60 mph (7.40 km/h) - Starting 2012 |
| Speeds Reverse - 2nd | 8.10 mph (13.00 km/h) - Starting 2012 |
| Speeds Reverse - 3rd | 13.90 mph (22.40 km/h) - Starting 2012 |
| Static tipping load full 35° turn (§) | 102,592.00 lbs (46,535.00 kg) - Starting 2012 |
| Static tipping load full 35° turn* (§) | 96,635.00 lbs (43,833.00 kg) - Starting 2018 |
| Static tipping load full 35° turn** (§) | 102,592.00 lbs (46,535.00 kg) - Starting 2018 |
| Static tipping load full 40° turn (§) | 98,990.00 lbs (44,901.00 kg) - Starting 2012 |
| Static tipping load full 40° turn* (§) | 92,552.00 lbs (41,981.00 kg) - Starting 2018 |
| Static tipping load full 40° turn** (§) | 98,990.00 lbs (44,901.00 kg) - Starting 2018 |
| Static tipping load full 43° turn (§) | 96,637.00 lbs (43,834.00 kg) - Starting 2012 |
| Static tipping load full 43° turn* (§) | 89,924.00 lbs (40,789.00 kg) - Starting 2018 |
| Static tipping load full 43° turn** (§) | 96,637.00 lbs (43,834.00 kg) - Starting 2018 |
| Stroke | 6.40 in (162.00 mm) - Starting 2010 |
| Struck capacity (§) | 13.30 cu yd (10.20 cu m) - Starting 2010 |
| Tip Load | 136,365 61,854) - Starting 2021 |
| Tipping load straight (§) | 114,858.00 lbs (52,099.00 kg) - Starting 2012 |
| Tipping load straight* (§) | 111,192.00 lbs (50,436.00 kg) - Starting 2018 |
| Tipping load straight** (§) | 114,858.00 lbs (52,099.00 kg) - Starting 2018 |
| Tires used for measurements | 45/65-45 (L-5 - Starting 2010 |
| Tooth tip | 96.00 in (2,427.00 mm) - Starting 2010 |
| Travel Speed(Fwd/Rev) | 14.2 / 15.4 mph - Starting 2021 |
| Tread Width | 130.00 in (3.30 m) - Starting 2010 |
| Tread width (std. tires) | 130.00 in (3.30 m) - Starting 2010 |
| U.S. EPA Tier 2 (Equivalent) Final - Flywheel Power | Prefix ZMX - Starting 2013 |
| U.S. EPA Tier 2 (Equivalent) Final - Max. | 907.00 hp (676.00 kW) - Starting 2013 |
| U.S. EPA Tier 2 (Equivalent) Final - Net | 814.00 hp (607.00 kW) - Starting 2013 |
| U.S. EPA Tier 4 Final Flywheel Power | Prefix 880 - Starting 2013 |
| Width Over Tires | 177.00 in (4.50 m) - Starting 2010 |
| Width over tires (std. tires) | 177.00 in (4.50 m) - Starting 2010 |
| Front | Fixed |
|---|---|
| Oscillation Angle | 10 degrees , 8 degrees with Stops |
| Rear | Oscillating |
| Brakes | Meets SAE J1473, OCT90 and ISO 3450:1992 |
|---|
| Breakout Force | 128,895.00 lbs (58,465.86 kg) |
|---|---|
| Bucket Capacity - Heaped | 16 cu yd |
| Bucket Capacity - Struck | 14 cu yd |
| Bucket Width | 15.83 ft (4.82 m) |
| Dump Clearance At Max Raise | 15.12 ft (4.61 m) |
| Bucket Capacities | 10.7-12.3 m3 (14-16 yd3) |
|---|
| Cab - Rops/Fops | Meets SAE and ISO standards. |
|---|---|
| Rops/Fops | Meets SAE and ISO standards |
| Ground Clearance | 2.25 ft (0.69 m) |
|---|---|
| Height | 18.58 ft (5.66 m) |
| Height To Top Of Cab | 18.63 ft (5.68 m) |
| Length | 52.00 ft (15.85 m) |
| Length With Bucket On Ground | 51.63 ft (15.74 m) |
| Reach At Max Lift And Dump | 7.64 ft (2.33 m) |
| Weight | 220,621.00 lbs (100,072.13 kg) |
| Wheelbase | 19.32 ft (5.89 m) |
| Width | 16.33 ft (4.98 m) |
| Width Over Tires | 18.05 ft (5.50 m) |
| B-Pin Height - Maximum Lift | 24.60 ft (7.50 m) |
|---|---|
| Clearance At 45 Degrees Dump (Tooth Tip) | 15.10 ft (4.60 m) |
| Dump Angle At Maximum Lift | 50 degrees |
| Ground To Bumper Clearance | 3.90 ft (1.19 m) |
| Ground To Center Of Axles | 4.50 ft (1.37 m) |
| Ground To Lower Hitch Clearance | 2.30 ft (0.70 m) |
| Ground To Top Of Exhaust Stacks | 17.30 ft (5.27 m) |
| Ground To Top Of Hood | 13.30 ft (4.05 m) |
| Ground To Top Of Rops | 18.70 ft (5.70 m) |
| Maximum Overall Height - Bucket Raised | 33.10 ft (10.09 m) |
| Maximum Overall Length | 52.90 ft (16.12 m) |
| Rack Back Angle - Carry | 52.5 degrees |
| Rack Back Angle - Ground Level | 42.8 degrees |
| Rack Back Angle - Maximum Lift | 65 degrees |
| Reach - Maximum Lift | 6.90 ft (2.10 m) |
| Rear Axle - Centerline To Bumper | 13.80 ft (4.21 m) |
| Tread Width | 10.90 ft (3.32 m) |
| Wheel Base | 19.40 ft (5.91 m) |
| B-Pin Height - Maximum Lift | 22.80 ft (6.95 m) |
|---|---|
| Clearance At 50 Degrees Dump (Tooth Tip) | 14.70 ft (4.48 m) |
| Dump Angle At Maximum Lift | 50 degrees |
| Ground To Bumper Clearance | 3.90 ft (1.19 m) |
| Ground To Center Of Axles | 4.50 ft (1.37 m) |
| Ground To Lower Hitch Clearance | 2.30 ft (0.70 m) |
| Ground To Top Of Exhaust Stacks | 17.30 ft (5.27 m) |
| Ground To Top Of Hood | 13.30 ft (4.05 m) |
| Ground To Top Of Rops | 18.70 ft (5.70 m) |
| Maximum Overall Height - Bucket Raised | 30.50 ft (9.30 m) |
| Maximum Overall Length | 52.00 ft (15.85 m) |
| Rack Back Angle - Carry | 52.7 degrees |
| Rack Back Angle - Ground Level | 43.4 degrees |
| Rack Back Angle - Maximum Lift | 65 degrees |
| Reach - Maximum Lift | 7.00 ft (2.13 m) |
| Rear Axle - Centerline To Bumper | 13.80 ft (4.21 m) |
| Tread Width | 10.90 ft (3.32 m) |
| Wheel Base | 19.40 ft (5.91 m) |
| Bumper Clearance | 3.86 ft (1.18 m) |
|---|---|
| Ground Clearance | 2.25 ft (0.69 m) |
| Height - Top Of Hood | 17.22 ft (5.25 m) |
| Height - Top Of Rops/Fops | 18.63 ft (5.68 m) |
| Wheel Base Length | 19.32 ft (5.89 m) |
| Bore | 5.70 in (14.48 cm) |
|---|---|
| Displacement | 8.50 cu in (139.29 cu cm) |
| Emissions | U.S. EPA Tier 4 Final |
| Emissions (Tier 2 Equivalent): Gross Power - Iso 14396 | 884.00 hp (659.21 kw) |
| Emissions (Tier 2 Equivalent): Gross Power - Sae J1995 | 907.00 hp (676.36 kw) |
| Emissions (Tier 2 Equivalent): Net Power - Sae J1349 | 814.00 hp (607.01 kw) |
| Emissions (Tier 2 Equivalent): Net Power - Sae J1995 | 814.00 hp (607.01 kw) |
| Emissions (Tier 2 Equivalent): Peak Torque At 1,200 Rpm - Sae J1995 | 4796 rpm |
| Emissions (Tier 2 Equivalent): Rated Speed | 1750 rpm |
| Emissions (U.S. Epa Tier 4 Final): Gross Power - Iso 14396 | 884.00 hp (659.21 kw) |
| Emissions (U.S. Epa Tier 4 Final): Gross Power - Sae J1995 | 900.00 hp (671.14 kw) |
| Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1349 | 814.00 hp (607.01 kw) |
| Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1995 | 814.00 hp (607.01 kw) |
| Emissions (U.S. Epa Tier 4 Final): Peak Torque At 1,200 Rpm - Sae J1995 | 4765 rpm |
| Emissions (U.S. Epa Tier 4 Final): Rated Speed | 1750 rpm |
| Engine Make | 2236 |
| Engine Model | Cat C32 with ACERT Technology |
| Gross Power | 904.00 hp (674.12 kw) |
| Gross Power - Sae J1995 | 904.00 hp (674.12 kw) |
| Gross Power*** | 900.00 hp (671.14 kw) |
| Net Power | 801.00 hp (597.32 kw) |
| Net Power*** | 814.00 hp (607.01 kw) |
| Note (Tier 2 Equivalent) (1) | These ratings apply at 1,750 rpm when tested under the specified standard conditions. |
| Note (Tier 2 Equivalent) (2) | Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. |
| Note (Tier 4 Final) (1) | These ratings apply at 1,750 rpm when tested under the specified standard conditions. |
| Note (Tier 4 Final) (2) | Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. |
| Number Of Cylinders | 12 |
| Power Measured @ | 1750 rpm |
| Stroke | 6.40 in (16.26 cm) |
| Dump | 1.8 s |
|---|---|
| Dump* | 1.8 s |
| Lower Float Down | 3.7 s |
| Lower Float Down - Empty | 3.7 s |
| Rack Back | 4.4 s |
| Raise | 9.4 s |
| Raise* | 9.4 s |
| Total Hydraulic Cycle Time | 14.9 s |
| Relief Valve Setting | 4500 psi |
|---|
| Lift Cylinder - Bore | 11.00 in (27.94 cm) |
|---|---|
| Lift Cylinder - Stroke | 45.20 in (114.81 cm) |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Displacement Piston |
| Maximum Flow At 1,850 Rpm | 254.00 gpm (961.39 lpm) |
| Relief Valve Setting - Lift/Tilt | 4500 psi |
| Tilt Cylinder - Bore | 10.50 in (26.67 cm) |
| Tilt Cylinder - Stroke | 80.90 in (205.49 cm) |
| Maximum Flow At 1,350 Rpm | 95.00 gpm (359.58 lpm) |
|---|---|
| Steering Cut Off Pressure | 4500 psi |
| Steering Cycle Times - High Idle | 4.4 s |
| Steering Cycle Times - Low Idle | 6.4 s |
| Steering System - Circuit | Pilot, Load Sensing |
| Steering System - Pump | Piston, Variable Displacement |
| Lift Cylinder, Double Acting - Bore | 11.00 in (27.94 cm) |
|---|---|
| Lift Cylinder, Double Acting - Stroke | 45.20 in (114.81 cm) |
| Relief Valve Setting | 4500 psi |
| Relief Valve Setting - Low Idle | 4500 psi |
| Tilt Cylinder, Double Acting - Bore | 10.50 in (26.67 cm) |
| Tilt Cylinder, Double Acting - Stroke | 80.90 in (205.49 cm) |
| Serial Number Prefix | 880 |
|---|
| Breakout Force | 128,895.00 lbs (58,465.86 kg) |
|---|---|
| Bucket Capacity Range | 10.7-12.3 m3 (14-16 yd3) |
| Operating Weight - High Lift | 226,249.00 lbs (102,624.95 kg) |
| Operating Weight - High Lift** | 221,847.00 lbs (100,628.23 kg) |
| Operating Weight - Standard | 220,089.00 lbs (99,830.82 kg) |
| Operating Weight - Standard Lift | 214,948.00 lbs (97,498.89 kg) |
| Operating Weight - Standard Lift* | 220,089.00 lbs (99,830.82 kg) |
| Rated Payload - High Lift | 42,000.00 lbs (19,050.90 kg) |
| Rated Payload - High Lift (Face Material) | 46,297.10 lbs (21,000.04 kg) |
| Rated Payload - Standard (Face Material) | 52,910.90 lbs (24,000.01 kg) |
| Rated Payload - Standard Lift | 48,000.00 lbs (21,772.46 kg) |
| Breakout Force | 129,777.00 lbs (58,865.93 kg) |
|---|---|
| Static Tipping Load - At 35 Degrees Articulation | 96,853.00 lbs (43,931.84 kg) |
| Breakout Force | 127,813.00 lbs (57,975.07 kg) |
|---|---|
| Static Tipping Load - At 35 Degrees Articulation | 114,760.00 lbs (52,054.33 kg) |
| Breakout Force | 128,895.00 lbs (58,465.86 kg) |
|---|---|
| High Lift Breakout Force | 127,775.00 lbs (57,957.84 kg) |
| Standard Lift Breakout Force | 128,895.00 lbs (58,465.86 kg) |
| Static Tipping Load - At 35 Degrees Articulation | 113,159.00 lbs (51,328.12 kg) |
| Breakout Force | 123,439.00 lbs (55,991.06 kg) |
|---|---|
| Static Tipping Load - At 35 Degrees Articulation | 122,010.00 lbs (55,342.87 kg) |
| Alternator Supplied Amperage | 150 amps |
|---|---|
| Cooling System Fluid Capacity | 77.00 gal (291.45 l) |
| Engine Oil Fluid Capacity | 32.00 gal (121.12 l) |
| Front Axle/Diff Fluid Capacity | 95.00 gal (359.58 l) |
| Fuel Capacity | 413.00 gal (1,563.21 l) |
| Operating Voltage | 24 V |
| Operating Weight | 214,948.00 lbs (97,498.89 kg) |
| Rear Axle/Diff Fluid Capacity | 91.00 gal (344.44 l) |
| Static Tipping Weight | 113,449.90 lbs (51,460.07 kg) |
| Tire Size | 45/65 45 |
| Transmission Fluid Capacity | 45.00 gal (170.33 l) |
| Ac Oil | 0.10 gal (0.38 l) |
|---|---|
| Ac Refrigerant | 6.00 lbs (2.72 kg) |
| Cooling System | 77.00 gal (291.45 l) |
| Cooling Systems | 77.00 gal (291.45 l) |
| Crankcase | 32.00 gal (121.12 l) |
| Differential - Final Drives - Front | 95.00 gal (359.58 l) |
| Differential - Final Drives - Rear | 91.00 gal (344.44 l) |
| Engine Crankcase | 32.00 gal (121.12 l) |
| Fuel Tank | 413.00 gal (1,563.21 l) |
| Fuel Tank - Standard | 413.00 gal (1,563.21 l) |
| Hydraulic System - Implement | 86.00 gal (325.51 l) |
| Hydraulic System - Steering | 42.00 gal (158.97 l) |
| Hydraulic Tank - Implement | 86.00 gal (325.51 l) |
| Hydraulic Tank - Steering/Brake | 42.00 gal (158.97 l) |
| Transmission | 45.00 gal (170.33 l) |
| Windshield Washer Fluid | 4.90 gal (18.55 l) |
| Hearing Protection | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
|---|---|
| Machine Sound Power Level - Sound Suppressed Machine Configuration | The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Machine Sound Power Level - Standard Machine Configuration | The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Operator Sound Pressure Level | The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Performance | Performance |
| Tires | Choose from a variety of tires to match your application. |
|---|
| Converter Drive - Forward 1 | 4.40 mph (7.08 kph) |
|---|---|
| Converter Drive - Forward 2 | 7.60 mph (12.23 kph) |
| Converter Drive - Forward 3 | 12.80 mph (20.60 kph) |
| Converter Drive - Reverse 1 | 4.60 mph (7.40 kph) |
| Converter Drive - Reverse 2 | 8.10 mph (13.04 kph) |
| Converter Drive - Reverse 3 | 13.90 mph (22.37 kph) |
| Direct Drive - Forward 1 | Lock-up Disabled |
| Direct Drive - Forward 2 | 8.00 mph (12.87 kph) |
| Direct Drive - Forward 3 | 14.20 mph (22.85 kph) |
| Direct Drive - Reverse 1 | 4.90 mph (7.89 kph) |
| Direct Drive - Reverse 2 | 8.80 mph (14.16 kph) |
| Direct Drive - Reverse 3 | 15.40 mph (24.78 kph) |
| Forward - 1 | 4.30 mph (6.92 kph) |
| Forward - 2 | 7.40 mph (11.91 kph) |
| Forward - 3 | 12.60 mph (20.28 kph) |
| Max Speed - Forward | 12.80 mph (20.60 kph) |
| Max Speed - Reverse | 13.90 mph (22.37 kph) |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Reverse - 1 | 4.70 mph (7.56 kph) |
| Reverse - 2 | 8.10 mph (13.04 kph) |
| Reverse - 3 | 13.80 mph (22.21 kph) |
| Transmission Type | Planetary, powershift |
| Operating Weight - High Lift | 226,249.00 lbs (102,624.95 kg) |
|---|---|
| Operating Weight - High Lift** | 221,847.00 lbs (100,628.23 kg) |
| Operating Weight - Standard Lift | 214,948.00 lbs (97,498.89 kg) |
| Operating Weight - Standard Lift* | 220,089.00 lbs (99,830.82 kg) |