Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar IT12B Wheel Loader is a versatile and powerful machine designed to handle a wide range of tasks with efficiency and ease. With a Gross Power of 81 hp and a hydraulic pump flow capacity of 29.6 gpm, this loader is capable of lifting and moving heavy loads with precision. Equipped with a spacious cab for operator comfort and safety features like a static tipping load of up to 9748.9 lbs, the IT12B is a reliable choice for any construction or material handling project.
| Approx. Operating Weight | 17,530.00 lbs (7,950.00 kg) - Starting 1989 |
|---|---|
| Breakout Force | 13,583.00 lbf (6,160.00 kgf) - Starting 1989 |
| Dump Clearance at Max Height | 106.00 in (2.69 m) - Starting 1989 |
| Flywheel Horsepower | 78.00 hp (58.17 kw) - Starting 1989 |
| Ground Clearance | 13.50 in (343.00 mm) - Starting 1989 |
| Max Reach at Max Height | 37.70 in (958.00 mm) - Starting 1989 |
| Maximum Forward Speed | 21.10 mph (34.00 km/h) - Starting 1989 |
| Maximum Reverse Speed | 13.90 mph (22.40 km/h) - Starting 1989 |
| Product Identification Prefix | 1KF - Starting 1989 |
| Rated Capacity | 1.60 cu yd (1.20 cu m) - Starting 1989 |
| Width Over Tires | 85.00 in (2.15 m) - Starting 1989 |
| Width | 7.90 ft (2.41 m) |
|---|
| Breakout Force | 13,583.00 lbs (6,161.15 kg) |
|---|---|
| Bucket Capacity - Heaped | 1.6 cu yd |
| Bucket Capacity - Struck | 1.4 cu yd |
| Dump Clearance At Max Lift | 8.99 ft (2.74 m) |
|---|---|
| Fork Tine Length | 4.00 ft (1.22 m) |
| Ground Clearance | 1.13 ft (0.34 m) |
| Height | 9.67 ft (2.95 m) |
| Height To Top Of Cab | 9.83 ft (3.00 m) |
| Hinge Pin Max Height | 11.92 ft (3.63 m) |
| Hook Height At Max Lift - Extended | 21.96 ft (6.69 m) |
| Hook Height At Max Lift - Standard | 19.21 ft (5.86 m) |
| Hook Reach At Max Lift - Extended | 8.43 ft (2.57 m) |
| Hook Reach At Max Lift - Standard | 6.63 ft (2.02 m) |
| Length | 20.42 ft (6.22 m) |
| Length W/ Bucket On Ground | 20.54 ft (6.26 m) |
| Length With Out Forks On Ground | 21.84 ft (6.66 m) |
| Max Lift Height | 11.59 ft (3.53 m) |
| Reach At Max Height And Dump | 3.01 ft (0.92 m) |
| Weight | 17,530.00 lbs (7,951.48 kg) |
| Wheelbase | 7.67 ft (2.34 m) |
| Width | 7.00 ft (2.13 m) |
| Displacement | 268.60 cu in (4,401.58 cu cm) |
|---|---|
| Engine Make | 2236 |
| Engine Model | 3114 |
| Gross Power | 81.00 hp (60.40 kw) |
| Net Power | 75.00 hp (55.93 kw) |
| Power Measured @ | 2400 rpm |
| Dump Time | 1.6 sec |
|---|---|
| Lower Time | 3 sec |
| Pump Flow Capacity | 29.60 gpm (112.04 lpm) |
| Raise Time | 6.6 sec |
| Relief Valve Setting | 2204 psi |
| Alternator Supplied Amperage | 55 amps |
|---|---|
| Cooling System Fluid Capacity | 8.00 gal (30.28 l) |
| Engine Oil Capacity | 3.00 gal (11.36 l) |
| Front Diff Fluid Capacity | 4.80 gal (18.17 l) |
| Fuel Capacity | 25.70 gal (97.27 l) |
| Hydraulic System Fluid Capacity | 17.70 gal (66.99 l) |
| Operating Voltage | 24 V |
| Operating Weight | 17,526.80 lbs (7,950.03 kg) |
| Rear Axle Oscillation | 22 degrees |
| Rear Diff Fluid Capacity | 4.80 gal (18.17 l) |
| Static Tipping Load - Bucket | 9,748.90 lbs (4,422.03 kg) |
| Static Tipping Load - Forks | 7,826.50 lbs (3,550.05 kg) |
| Static Tipping Load - Material Handler | 4,418.10 lbs (2,004.02 kg) |
| Tire Size | 17.5-25 12PR |
| Transmission Fluid Capacity | 6.10 gal (23.09 l) |
| Turning Radius | 17.50 ft (5.33 m) |
| Max Speed Forward | 22.40 mph (36.05 kph) |
|---|---|
| Max Speed Reverse | 15.00 mph (24.14 kph) |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Transmission Type | electronic powershift |