Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 39,265.20 lbs (17,810.42 kg) |
| Bucket Capacity - heaped | 4.50 cu yd (3.44 cu m) |
| Bucket Capacity - struck | 3.80 cu yd (2.91 cu m) |
| Bucket Width | 10.00 ft (3.05 m) |
| Dump Clearance at Max Raise | 9.70 ft (2.96 m) |
| Ground Clearance | 1.20 ft (0.37 m) |
| Height - Top of Cab | 11.30 ft (3.44 m) |
| Hinge Pin - Max Height | 13.40 ft (4.08 m) |
| Length with Bucket on Ground | 27.40 ft (8.35 m) |
| Reach at Max Lift and Dump | 3.60 ft (1.10 m) |
| Wheelbase | 10.70 ft (3.26 m) |
| Width Over Tires | 9.40 ft (2.87 m) |
| Displacement | 611.00 cu in (10,012.52 cu cm) |
| Engine Model | LT-10-225 HT |
| Gross Power | 226.70 hp (169.05 kw) |
| Net Power | 214.60 hp (160.03 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1300 rpm |
| Dump Time | 1.4 seconds |
| Lower Time | 3.2 seconds |
| Pump Flow Capacity | 90.50 gpm (342.54 lpm) |
| Pump Type | tandem gear type |
| Raise Time | 7.4 seconds |
| Relief Valve Setting | 2755.8 psi |
| Alternator Supplied Amperage | 100 amps |
| Cooling System Fluid Capacity | 15.10 gal (57.15 l) |
| Engine Oil Fluid Capacity | 9.00 gal (34.07 l) |
| Front Axle/Diff Fluid Capacity | 9.10 gal (34.44 l) |
| Fuel Capacity | 75.10 gal (284.25 l) |
| Hydraulic System Fluid Capacity | 76.10 gal (288.04 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 43,475.20 lbs (19,720.04 kg) |
| Rear Axle Oscillation | 18.5 degrees |
| Rear Axle/Diff Fluid Capacity | 9.10 gal (34.44 l) |
| Static Tipping Weight | 32,319.80 lbs (14,660.03 kg) |
| Tire Size | 23.5-25 |
| Transmission Fluid Capacity | 10.60 gal (40.12 l) |
| Turning Radius | 24.60 ft (7.50 m) |
| Max Speed - Forward | 19.30 mph (31.06 kph) |
| Max Speed - Reverse | 19.30 mph (31.06 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Transmission Type | Clark countershaft powershift |