Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 27,000.00 lbs (12,247.01 kg) |
| Bucket Capacity - heaped | 6.30 cu yd (4.82 cu m) |
| Bucket Width | 11.50 ft (3.51 m) |
| Dump Clearance at Max Raise | 10.20 ft (3.11 m) |
| Ground Clearance | 1.70 ft (0.52 m) |
| Height - Top of Cab | 12.90 ft (3.93 m) |
| Hinge Pin - Max Height | 14.70 ft (4.48 m) |
| Length with Bucket on Ground | 30.60 ft (9.33 m) |
| Reach at Max Lift and Dump | 5.00 ft (1.52 m) |
| Wheelbase | 11.90 ft (3.63 m) |
| Aspiration | turbocharged |
| Displacement | 660.30 cu in (10,820.40 cu cm) |
| Engine Model | QSM11 diesel engine |
| Net Power | 335.30 hp (250.04 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Dump Time | 1.3 seconds |
| Lower Time | 3.5 seconds |
| Pump Flow Capacity | 140.30 gpm (531.04 lpm) |
| Pump Type | vane type |
| Raise Time | 6.5 seconds |
| Relief Valve Setting | 2845 psi |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 15.90 gal (60.18 l) |
| Engine Oil Fluid Capacity | 9.00 gal (34.07 l) |
| Front Axle/Diff Fluid Capacity | 13.30 gal (50.34 l) |
| Fuel Capacity | 126.90 gal (480.32 l) |
| Hydraulic System Fluid Capacity | 79.30 gal (300.15 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 65,697.80 lbs (29,800.06 kg) |
| Rear Axle Oscillation | 20 degrees |
| Rear Axle/Diff Fluid Capacity | 13.30 gal (50.34 l) |
| Static Tipping Weight | 50,706.40 lbs (23,000.06 kg) |
| Tire Size | 29.5R25*1 |
| Transmission Fluid Capacity | 13.30 gal (50.34 l) |
| Turning Radius | 24.10 ft (7.35 m) |
| Max Speed - Forward | 21.80 mph (35.08 kph) |
| Max Speed - Reverse | 16.80 mph (27.04 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | full auto powershift |