Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 30,247.00 lbs (13,719.83 kg) |
| Bucket Capacity - heaped | 3.70 cu yd (2.83 cu m) |
| Bucket Capacity - struck | 3.20 cu yd (2.45 cu m) |
| Bucket Width | 9.90 ft (3.02 m) |
| Dump Clearance at Max Raise | 9.90 ft (3.02 m) |
| Ground Clearance | 1.70 ft (0.52 m) |
| Height - Top of Cab | 11.20 ft (3.41 m) |
| Hinge Pin - Max Height | 12.10 ft (3.69 m) |
| Length with Bucket on Ground | 26.30 ft (8.02 m) |
| Wheelbase | 10.90 ft (3.32 m) |
| Width Over Tires | 7.00 ft (2.13 m) |
| Aspiration | 4-cycle diesel turbocharged CAC direct start direct injection |
| Displacement | 504.50 cu in (8,267.29 cu cm) |
| Engine Model | C 8.3 |
| Gross Power | 205.00 hp (152.87 kw) |
| Net Power | 195.00 hp (145.41 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1500 rpm |
| Dump Time | 2.5 seconds |
| Lower Time | 4 seconds |
| Pump Flow Capacity | 72.00 gpm (272.52 lpm) |
| Pump Type | Three multiple vane cartriges driven from accessory drive. |
| Raise Time | 5.9 seconds |
| Relief Valve Setting | 3000 psi |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 6.30 gal (23.85 l) |
| Engine Oil Fluid Capacity | 5.00 gal (18.93 l) |
| Fuel Capacity | 79.30 gal (300.15 l) |
| Hydraulic System Fluid Capacity | 43.60 gal (165.03 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 36,376.00 lbs (16,499.90 kg) |
| Rear Axle Oscillation | 24 degrees |
| Static Tipping Weight | 29,916.00 lbs (13,569.69 kg) |
| Tire Size | 23.5x2520 PR(L-3) |
| Transmission Fluid Capacity | 8.20 gal (31.04 l) |
| Turning Radius | 21.50 ft (6.55 m) |
| Max Speed - Forward | 22.40 mph (36.05 kph) |
| Max Speed - Reverse | 16.40 mph (26.39 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | Full power shift type electrically controlled transmission with automatic gear shifting system |