Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 4,630.00 lbs (2,100.14 kg) |
| Bucket Capacity - heaped | 0.40 cu yd (0.31 cu m) |
| Bucket Capacity - struck | 0.40 cu yd (0.31 cu m) |
| Bucket Width | 4.50 ft (1.37 m) |
| Dump Clearance at Max Raise | 6.10 ft (1.86 m) |
| Ground Clearance | 0.80 ft (0.24 m) |
| Height - Top of Cab | 7.90 ft (2.41 m) |
| Hinge Pin - Max Height | 7.70 ft (2.35 m) |
| Length with Bucket on Ground | 11.30 ft (3.44 m) |
| Reach at Max Lift and Dump | 1.90 ft (0.58 m) |
| Wheelbase | 5.00 ft (1.52 m) |
| Width Over Tires | 4.40 ft (1.34 m) |
| Displacement | 68.60 cu in (1,124.16 cu cm) |
| Engine Model | D1105-K2A |
| Net Power | 22.00 hp (16.41 kw) |
| Number of Cylinders | 3 |
| Power Measured @ | 2500 rpm |
| Dump Time | 1 seconds |
| Lower Time | 3.2 seconds |
| Pump Flow Capacity | 6.10 gpm (23.09 lpm) |
| Pump Type | gear type |
| Raise Time | 4.6 seconds |
| Relief Valve Setting | 2987.8 psi |
| Alternator Supplied Amperage | 40 amps |
| Cooling System Fluid Capacity | 1.50 gal (5.68 l) |
| Engine Oil Fluid Capacity | 1.50 gal (5.68 l) |
| Front Axle/Diff Fluid Capacity | 1.00 gal (3.79 l) |
| Fuel Capacity | 8.80 gal (33.31 l) |
| Hydraulic System Fluid Capacity | 6.70 gal (25.36 l) |
| Operating Voltage | 12 volts |
| Operating Weight | 4,221.90 lbs (1,915.02 kg) |
| Rear Axle Oscillation | 16 degrees |
| Rear Axle/Diff Fluid Capacity | 1.00 gal (3.79 l) |
| Static Tipping Weight | 2,976.30 lbs (1,350.03 kg) |
| Tire Size | 10-16.5-4PR (L2) |
| Turning Radius | 8.40 ft (2.56 m) |
| Max Speed - Forward | 9.30 mph (14.97 kph) |
| Max Speed - Reverse | 9.30 mph (14.97 kph) |
| Transmission Type | Hydrostatic transmission automatically controls power and speed with electrically controlled |