Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 6,170.00 lbs (2,798.67 kg) |
| Bucket Capacity - heaped | 0.60 cu yd (0.46 cu m) |
| Bucket Capacity - struck | 0.50 cu yd (0.38 cu m) |
| Bucket Width | 5.20 ft (1.58 m) |
| Dump Clearance at Max Raise | 7.10 ft (2.16 m) |
| Ground Clearance | 0.90 ft (0.27 m) |
| Height - Top of Cab | 8.10 ft (2.47 m) |
| Hinge Pin - Max Height | 8.90 ft (2.71 m) |
| Length with Bucket on Ground | 13.60 ft (4.15 m) |
| Reach at Max Lift and Dump | 2.70 ft (0.82 m) |
| Wheelbase | 5.90 ft (1.80 m) |
| Width Over Tires | 5.00 ft (1.52 m) |
| Displacement | 91.50 cu in (1,499.42 cu cm) |
| Engine Model | D1503-DI-K2A |
| Net Power | 28.00 hp (20.88 kw) |
| Number of Cylinders | 3 |
| Power Measured @ | 2400 rpm |
| Dump Time | 1 seconds |
| Lower Time | 3.2 seconds |
| Pump Flow Capacity | 8.90 gpm (33.69 lpm) |
| Pump Type | gear type |
| Raise Time | 5 seconds |
| Relief Valve Setting | 2990 psi |
| Alternator Supplied Amperage | 40 amps |
| Cooling System Fluid Capacity | 1.60 gal (6.06 l) |
| Engine Oil Fluid Capacity | 1.50 gal (5.68 l) |
| Front Axle/Diff Fluid Capacity | 1.20 gal (4.54 l) |
| Fuel Capacity | 13.20 gal (49.96 l) |
| Hydraulic System Fluid Capacity | 11.10 gal (42.01 l) |
| Operating Voltage | 12 volts |
| Operating Weight | 5,831.30 lbs (2,645.04 kg) |
| Rear Axle Oscillation | 16 degrees |
| Rear Axle/Diff Fluid Capacity | 1.20 gal (4.54 l) |
| Static Tipping Weight | 3,637.70 lbs (1,650.04 kg) |
| Tire Size | 15.5/60-18-8PR (L2) tubeless nylon body |
| Turning Radius | 10.00 ft (3.05 m) |
| Max Speed - Forward | 9.30 mph (14.97 kph) |
| Max Speed - Reverse | 9.40 mph (15.13 kph) |
| Transmission Type | Hydrostatic transmission automatically controls power and speed with electrically controlled |