JCB 403 Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 403 ➔

Axles

Axle oil front	0.90 gal (3.41 l)
Axle oil rear	1.10 gal (4.16 l)

Bucket

Breakout Force	3,597.00 lbs (1,631.57 kg)
Dump Clearance at Max Raise	7.10 ft (2.16 m)

Dimensions

Ground Clearance	0.80 ft (0.24 m)
Height - Top of Cab	7.30 ft (2.23 m)
Hinge Pin - Max Height	9.50 ft (2.90 m)
Length with Bucket on Ground	13.70 ft (4.18 m)
Reach at Max Lift and Dump	1.20 ft (0.37 m)
Wheelbase	5.30 ft (1.62 m)
Width Over Tires	4.70 ft (1.43 m)

Electrical System

Alternator	60 Ah
Battery capacity	72 Ah
Voltage	12 V

Engine

Air cleaner	Donaldson FPG057502
Aspiration	Naturally aspirated
Displacement	91.50 cu in (1,499.42 cu cm)
Emissions level	Stage 3A
Engine Make	Kubota
Engine Model	V1505
Fan drive type	Direct mount
Gross Power	36.00 hp (26.85 kw)
No. of Valves	4
Number of Cylinders	4
Power Measured @	2700 rpm
Torque Measured @	2200 rpm

Hydraulic System

2610.7	180 bar psi
Dump Time	2.7 seconds
Lower Time	3 seconds
Pump Flow Capacity	10.70 gpm (40.50 lpm)
Pump Type	Gear
Raise Time	4.4 seconds

Operating Specifications

Cooling System Fluid Capacity	1.80 gal (6.81 l)
Engine Oil Fluid Capacity	1.80 gal (6.81 l)
Fuel Capacity	12.70 gal (48.07 l)
Hydraulic System Fluid Capacity	10.60 gal (40.12 l)
Operating Weight	5,527.00 lbs (2,507.01 kg)

Transmission

Max Speed - Forward	18.70 mph (30.09 kph)
Max Speed - Reverse	18.70 mph (30.09 kph)
Transmission Type	ZF / Bosch-Rexroth

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon