JCB 409 ZX Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 409 ZX ➔

Bucket

JCB 409 ZX Wheel Loader Bucket specifications
Bucket Capacity - heaped	1.20 cu yd (0.92 cu m)
Bucket Capacity - struck	1.00 cu yd (0.76 cu m)
Bucket Width	6.30 ft (1.92 m)
Dump Clearance at Max Raise	8.30 ft (2.53 m)

Dimensions

JCB 409 ZX Wheel Loader Dimensions specifications
Dump Clearance at Max Lift	8.30 ft (2.53 m)
Fork Tine Length	4.00 ft (1.22 m)
Ground Clearance	1.40 ft (0.43 m)
Height - Top of Cab	8.80 ft (2.68 m)
Hinge Pin - Max Height	10.40 ft (3.17 m)
Hinge Pin Max Height	10.40 ft (3.17 m)
Length w/ Bucket on Ground	16.70 ft (5.09 m)
Length with Bucket on Ground	16.70 ft (5.09 m)
Max Lift Height	10.00 ft (3.05 m)
Reach at Max Height and Dump	2.10 ft (0.64 m)
Reach at Max Lift and Dump	2.10 ft (0.64 m)
Wheelbase	6.60 ft (2.01 m)

Engine

JCB 409 ZX Wheel Loader Engine specifications
Engine Model	1104C-44
Gross Power	75.00 hp (55.93 kw)
Max Torque	223.00 lbs ft (302.34 nm)
Net Power	67.00 hp (49.96 kw)
Number of Cylinders	4
Torque Measured @	1400 rpm

Hydraulic System

JCB 409 ZX Wheel Loader Hydraulic System specifications
Dump Time	1 seconds
Lower Time	3.2 seconds
Pump Flow Capacity	17.50 gpm (66.24 lpm)
Pump Type	Gear
Raise Time	5 seconds

Operating Specifications

JCB 409 ZX Wheel Loader Operating Specifications specifications
Alternator Supplied Amperage	75 amps
Cooling System Fluid Capacity	4.10 gal (15.52 l)
Engine Oil Capacity	2.50 gal (9.46 l)
Engine Oil Fluid Capacity	2.50 gal (9.46 l)
Front Axle/Diff Fluid Capacity	2.60 gal (9.84 l)
Front Diff Fluid Capacity	2.60 gal (9.84 l)
Fuel Capacity	26.50 gal (100.30 l)
Hydraulic System Fluid Capacity	22.50 gal (85.16 l)
Operating Voltage	12 volts
Rear Axle/Diff Fluid Capacity	2.80 gal (10.60 l)
Rear Diff Fluid Capacity	2.80 gal (10.60 l)
Static Tipping Load - Bucket	9,191.00 lbs (4,168.97 kg)
Static Tipping Load - Forks	6,710.90 lbs (3,044.02 kg)
Static Tipping Weight	9,193.30 lbs (4,170.02 kg)
Tire Size	14.5x20

Transmission

JCB 409 ZX Wheel Loader Transmission specifications
Max Speed - Forward	12.50 mph (20.12 kph)
Max Speed - Reverse	12.50 mph (20.12 kph)
Max Speed Forward	12.50 mph (20.12 kph)
Max Speed Reverse	12.50 mph (20.12 kph)
Number of Forward Gears	2
Number of Reverse Gears	2
Transmission Type	Hydrostatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon