JCB 419S HT Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 419S HT ➔

Bucket

JCB 419S HT Wheel Loader Bucket specifications
Breakout Force	20,682.50 lbs (9,381.44 kg)
Bucket Capacity - heaped	2.10 cu yd (1.61 cu m)
Bucket Capacity - struck	1.80 cu yd (1.38 cu m)
Bucket Width	7.90 ft (2.41 m)
Dump Clearance at Max Raise	9.10 ft (2.77 m)

Dimensions

JCB 419S HT Wheel Loader Dimensions specifications
Ground Clearance	1.70 ft (0.52 m)
Height - Top of Cab	10.50 ft (3.20 m)
Hinge Pin - Max Height	12.20 ft (3.72 m)
Length with Bucket on Ground	21.80 ft (6.64 m)
Reach at Max Lift and Dump	2.80 ft (0.85 m)
Wheelbase	9.40 ft (2.87 m)
Width Over Tires	8.80 ft (2.68 m)

Engine

JCB 419S HT Wheel Loader Engine specifications
Air cleaner	Cyclonic pre-filter with engine fan scavenge system
Aspiration	Turbo Charged
Displacement	408.90 cu in (6,700.69 cu cm)
Emission Tier Level	EU Stage IV US EPA Tier 4F
Engine Model	QSB
Engine Type	Cummins
Fan drive type	Hydraulically driven cooling fan
Gross Power	173.00 hp (129.01 kw)
Net Power	183.00 hp (136.47 kw)
No. of Valves	4
Number of Cylinders	6
Power Measured @	2100 rpm
Torque Measured @	1500 rpm

Hydraulic System

JCB 419S HT Wheel Loader Hydraulic System specifications
3335.9	230 bar psi
Dump Time	1.6 seconds
Lower Time	2.4 seconds
Pump Flow Capacity	47.60 gpm (180.17 lpm)
Pump Type	Variable placement
Raise Time	3.9 seconds
Relief Valve Setting	3190 psi
Total cycle	7.8 seconds

Operating Specifications

JCB 419S HT Wheel Loader Operating Specifications specifications
Alternator Supplied Amperage	120 amps
Articulation Angle	38 degrees
Auxiliary fuel tank	66.10 gal (250.19 l)
DEF tank capacity	6.30 gal (23.85 l)
Fuel Capacity	66.10 gal (250.19 l)
Full turn tipping load	15,366.30 lbs (6,970.05 kg)
Hydraulic System Fluid Capacity	41.00 gal (155.19 l)
Operating Voltage	24 volts
Operating Weight	23,397.70 lbs (10,613.03 kg)
Payload	7,683.20 lbs (3,485.05 kg)
Rear Axle Oscillation	9 degrees
Turning Radius	18.90 ft (5.76 m)

Transmission

JCB 419S HT Wheel Loader Transmission specifications
Max Speed - Forward	24.90 mph (40.07 kph)
Max Speed - Reverse	20.00 mph (32.19 kph)
Number of Forward Gears	6
Number of Reverse Gears	3
Transmission Type	6 speed non-lock up converter ZF

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon