Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 27,426.70 lbs (12,440.56 kg) |
|---|---|
| Bucket Capacity - heaped | 2.40 cu yd (1.83 cu m) |
| Bucket Width | 8.20 ft (2.50 m) |
| Dump Clearance at Max Raise | 9.50 ft (2.90 m) |
| Ground Clearance | 1.30 ft (0.40 m) |
|---|---|
| Height - Top of Cab | 10.40 ft (3.17 m) |
| Hinge Pin - Max Height | 12.60 ft (3.84 m) |
| Length with Bucket on Ground | 21.50 ft (6.55 m) |
| Reach at Max Lift and Dump | 3.30 ft (1.01 m) |
| Wheelbase | 9.60 ft (2.93 m) |
| Width Over Tires | 7.90 ft (2.41 m) |
| Aspiration | turbocharged |
|---|---|
| Displacement | 365.30 cu in (5,986.21 cu cm) |
| Engine Model | 1006-60T |
| Gross Power | 144.00 hp (107.38 kw) |
| Net Power | 132.00 hp (98.43 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2200 rpm |
| Torque Measured @ | 1400 rpm |
| Dump Time | 1.5 seconds |
|---|---|
| Lower Time | 3.4 seconds |
| Pump Flow Capacity | 58.20 gpm (220.29 lpm) |
| Pump Type | variable displacement piston pumps with load sensing system |
| Raise Time | 4.8 seconds |
| Relief Valve Setting | 3212 psi |
| Alternator Supplied Amperage | 55 amps |
|---|---|
| Cooling System Fluid Capacity | 13.30 gal (50.34 l) |
| Engine Oil Fluid Capacity | 3.90 gal (14.76 l) |
| Front Axle/Diff Fluid Capacity | 6.90 gal (26.12 l) |
| Fuel Capacity | 56.10 gal (212.34 l) |
| Hydraulic System Fluid Capacity | 55.50 gal (210.07 l) |
| Operating Voltage | 24 volts |
| Rear Axle Oscillation | 25 degrees |
| Rear Axle/Diff Fluid Capacity | 6.90 gal (26.12 l) |
| Tire Size | 17.5x25x12 ply (L2) |
| Transmission Fluid Capacity | 6.10 gal (23.09 l) |
| Max Speed - Forward | 23.60 mph (37.98 kph) |
|---|---|
| Max Speed - Reverse | 16.80 mph (27.04 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4 wheel drive semi-autoshift full powershift |