JCB 426HT Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 426HT ➔

Bucket

JCB 426HT Wheel Loader Bucket specifications
Breakout Force	31,023.70 lbs (14,072.13 kg)
Bucket Capacity - heaped	2.50 cu yd (1.91 cu m)
Bucket Capacity - struck	2.20 cu yd (1.68 cu m)

Dimensions

JCB 426HT Wheel Loader Dimensions specifications
Dump Clearance at Max Lift	9.70 ft (2.96 m)
Fork Tine Length	4.10 ft (1.25 m)
Ground Clearance	1.50 ft (0.46 m)
Height - Top of Cab	11.00 ft (3.35 m)
Hinge Pin Max Height	12.90 ft (3.93 m)
Length w/ Bucket on Ground	22.50 ft (6.86 m)
Max Lift Height	12.20 ft (3.72 m)
Reach at Max Height and Dump	3.20 ft (0.98 m)
Wheelbase	9.90 ft (3.02 m)
Width Over Tires	8.20 ft (2.50 m)

Engine

JCB 426HT Wheel Loader Engine specifications
Aspiration	Turbocharged wastegated
Displacement	408.90 cu in (6,700.69 cu cm)
Engine Model	QB6.7
Gross Power	165.00 hp (123.04 kw)
Max Torque	540.00 lbs ft (732.13 nm)
Net Power	152.00 hp (113.35 kw)
Number of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1400 rpm

Hydraulic System

JCB 426HT Wheel Loader Hydraulic System specifications
Dump Time	1 seconds
Lower Time	2.7 seconds
Pump Flow Capacity	69.80 gpm (264.19 lpm)
Pump Type	Twin variable displacement piston pumps
Raise Time	4.4 seconds
Relief Valve Setting	3625 psi

Operating Specifications

JCB 426HT Wheel Loader Operating Specifications specifications
Alternator Supplied Amperage	70 amps
Cooling System Fluid Capacity	55.00 gal (208.18 l)
Engine Oil Capacity	3.70 gal (14.00 l)
Front Diff Fluid Capacity	10.30 gal (38.99 l)
Fuel Capacity	61.00 gal (230.89 l)
Hydraulic System Fluid Capacity	9.00 gal (34.07 l)
Operating Voltage	24 volts
Operating Weight	28,841.00 lbs (13,082.07 kg)
Rear Axle Oscillation	21 degrees
Rear Diff Fluid Capacity	9.80 gal (37.09 l)
Static Tipping Load - Bucket	23,205.90 lbs (10,526.03 kg)
Static Tipping Load - Forks	16,691.00 lbs (7,570.92 kg)
Tire Size	Michelin 20.5R25 XHA (L3)
Transmission Fluid Capacity	7.00 gal (26.50 l)
Turning Radius	19.00 ft (5.79 m)

Transmission

JCB 426HT Wheel Loader Transmission specifications
Max Speed Forward	23.50 mph (37.82 kph)
Max Speed Reverse	15.60 mph (25.11 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	Smooth shift powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon