JCB 435S HL Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 435S HL ➔

Bucket

JCB 435S HL Wheel Loader Bucket specifications
Breakout Force	31,023.70 lbs (14,072.13 kg)
Bucket Capacity - heaped	2.50 cu yd (1.91 cu m)
Bucket Capacity - struck	2.20 cu yd (1.68 cu m)
Bucket Width	8.40 ft (2.56 m)
Dump Clearance at Max Raise	11.20 ft (3.41 m)

Dimensions

JCB 435S HL Wheel Loader Dimensions specifications
Ground Clearance	1.70 ft (0.52 m)
Height - Top of Cab	12.30 ft (3.75 m)
Hinge Pin - Max Height	14.30 ft (4.36 m)
Length with Bucket on Ground	24.70 ft (7.53 m)
Reach at Max Lift and Dump	3.20 ft (0.98 m)
Wheelbase	10.10 ft (3.08 m)
Width Over Tires	9.80 ft (2.99 m)

Engine

JCB 435S HL Wheel Loader Engine specifications
Air cleaner	Cyclonic pre-filter with engine fan scavenge system
Aspiration	Turbo Charged
Displacement	408.90 cu in (6,700.69 cu cm)
Emission Tier Level	EU Stage IV US EPA Tier 4F
Engine Model	QSB
Engine Type	Cummins
Fan drive type	Hydraulically driven cooling fan
Gross Power	230.00 hp (171.51 kw)
Net Power	206.00 hp (153.62 kw)
No. of Valves	4
Number of Cylinders	6
Power Measured @	2100 rpm
Torque Measured @	1500 rpm

Hydraulic System

JCB 435S HL Wheel Loader Hydraulic System specifications
3626	250 bar psi
Dump Time	1.8 seconds
Lower Time	2.8 seconds
Pump Flow Capacity	34.90 gpm (132.10 lpm)
Pump Type	Twin variable displacement piston pumps
Raise Time	4.7 seconds
Relief Valve Setting	3190 psi
Total cycle	9.3 seconds

Operating Specifications

JCB 435S HL Wheel Loader Operating Specifications specifications
Alternator Supplied Amperage	120 amps
Articulation Angle	40 degrees
Auxiliary fuel tank	105.70 gal (400.07 l)
DEF tank capacity	10.60 gal (40.12 l)
Fuel Capacity	105.70 gal (400.07 l)
Full turn tipping load	17,357.00 lbs (7,873.01 kg)
Hydraulic System Fluid Capacity	55.50 gal (210.07 l)
Operating Voltage	24 volts
Operating Weight	31,449.00 lbs (14,265.04 kg)
Payload	8,679.60 lbs (3,937.01 kg)
Rear Axle Oscillation	10.5 degrees
Turning Radius	19.80 ft (6.04 m)

Transmission

JCB 435S HL Wheel Loader Transmission specifications
Max Speed - Forward	32.50 mph (52.30 kph)
Max Speed - Reverse	22.50 mph (36.21 kph)
Number of Forward Gears	6
Number of Reverse Gears	3
Transmission Type	6 speed with lock up converter ZF 6WG210

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon