Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout Force | 33047 lbs (14,990 kg) |
Bucket Capacity - heaped | 3.1 cu yd (2 cu m) |
Bucket Capacity - struck | 2.6 cu yd (2 cu m) |
Bucket Width | 9 ft (3 m) |
Dump Clearance at Max Raise | 11.4 ft (3 m) |
Ground Clearance | 1.6 ft (0 m) |
Height - Top of Cab | 11.1 ft (3 m) |
Hinge Pin - Max Height | 15.4 ft (5 m) |
Length with Bucket on Ground | 26.1 ft (8 m) |
Reach at Max Lift and Dump | 3.7 ft (1 m) |
Wheelbase | 10.1 ft (3 m) |
Width Over Tires | 8.6 ft (3 m) |
Air cleaner | Cyclonic pre filter with engine fan scavenge system |
Aspiration | Turbo Charged |
Displacement | 408.9 cu in (0 cu m) |
Emission Tier Level | EU Stage IV, US EPA Tier 4F |
Engine Model | QSB |
Engine Type | Cummins |
Fan drive type | Hydraulically driven cooling fan |
Gross Power | 183 hp (136 kw) |
Net Power | 161 hp (120 kw) |
No. of Valves | 4 |
Number of Cylinders | 6 |
Power Measured @ | 2100 rpm |
Torque Measured @ | 1500 rpm |
3626 | 250 bar psi |
Dump Time | 2 seconds |
Lower Time | 4.7 seconds |
Pump Flow Capacity | 33.3 gpm (126 lpm) |
Pump Type | Variable displacement |
Raise Time | 6.3 seconds |
Relief Valve Setting | 3190 psi |
Total cycle | 12.9 seconds |
Alternator Supplied Amperage | 120 amps |
Articulation Angle | 40 degrees |
DEF tank capacity | 10.6 gal (40 l) |
Fuel Capacity | 71.4 gal (270 l) |
Full turn tipping load | 16402.4 lbs (7,440 kg) |
Hydraulic System Fluid Capacity | 55.5 gal (210 l) |
Operating Voltage | 24 volts |
Operating Weight | 33545.6 lbs (15,216 kg) |
Payload | 8201.2 lbs (3,720 kg) |
Rear Axle Oscillation | 10.5 degrees |
Turning Radius | 20.7 ft (6 m) |
Max Speed - Forward | 23.6 mph (38 kph) |
Max Speed - Reverse | 16 mph (26 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 3 |
Transmission Type | 4 speed non-lock up converter 4WG |