JCB 457 ZX Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 457 ZX ➔

The JCB 457 ZX is a heavy-duty wheel loader designed for material handling, aggregate, quarry, and construction applications. It is part of JCB's large wheel loader range and is built for high productivity, strong breakout force, and efficient cycle times. The machine typically features a powerful diesel engine, hydrostatic or torque-converter driveline depending on specification, and a reinforced loader arm and chassis for demanding site conditions. The 457 ZX is commonly used for loading trucks, stockpiling, and bulk material movement. Operator comfort, visibility, and service access are key design elements. Specifications vary by market and configuration.

General Specifications

JCB 457 ZX Wheel Loader General Specifications specifications
Bucket Capacity cu. yd. (cu m)	4.6 (3.5) — Starting 2026 Model Year
Engine Power Gross hp (kW)	282 (210) — Starting 2026 Model Year
Engine type	Cummins B Series — Starting 2026 Model Year
Max Dump Height ft. (m)	9' 4" (2848) — Starting 2026 Model Year
OperatingWeight lbs. (kg)	43,982 ( 19,950) — Starting 2026 Model Year

Bucket

JCB 457 ZX Wheel Loader Bucket specifications
Breakout Force	38,667.20 lbs (17,539.17 kg)
Bucket Capacity - heaped	4.10 cu yd (3.13 cu m)
Bucket Capacity - struck	3.70 cu yd (2.83 cu m)
Bucket Width	9.40 ft (2.87 m)
Dump Clearance at Max Raise	9.00 ft (2.74 m)

Dimensions

JCB 457 ZX Wheel Loader Dimensions specifications
Ground Clearance	1.60 ft (0.49 m)
Height - Top of Cab	11.30 ft (3.44 m)
Hinge Pin - Max Height	13.50 ft (4.11 m)
Length with Bucket on Ground	26.20 ft (7.99 m)
Reach at Max Lift and Dump	4.30 ft (1.31 m)
Wheelbase	10.90 ft (3.32 m)
Width Over Tires	8.90 ft (2.71 m)

Engine

JCB 457 ZX Wheel Loader Engine specifications
Air cleaner	Intergrated pre-cleaner scavenged
Aspiration	Turbo Charged
Displacement	469.90 cu in (7,700.30 cu cm)
Emission Tier Level	EPA 40 CFR 89 / Tier 4 Final EU 97/68/EC/STAGE IV
Engine Model	6R1000
Engine Type	MTU
Fan drive type	Hydraulic
Gross Power	258.00 hp (192.39 kw)
No. of Valves	4
Number of Cylinders	6
Power Measured @	1600 rpm
Torque Measured @	1600 rpm

Hydraulic System

JCB 457 ZX Wheel Loader Hydraulic System specifications
3190.8	220 bar psi
Dump Time	1.2 seconds
Lower Time	4.1 seconds
Pump Flow Capacity	40.50 gpm (153.29 lpm)
Pump Type	Variable displacement
Raise Time	5.8 seconds
Relief Valve Setting	3190 psi
Total cycle	11.1 seconds

Operating Specifications

JCB 457 ZX Wheel Loader Operating Specifications specifications
Alternator Supplied Amperage	100 amps
Articulation Angle	40 degrees
Cooling System Fluid Capacity	11.10 gal (42.01 l)
DEF tank capacity	11.10 gal (42.01 l)
Engine Oil Fluid Capacity	6.70 gal (25.36 l)
Front Axle/Diff Fluid Capacity	9.30 gal (35.20 l)
Fuel Capacity	79.30 gal (300.15 l)
Full turn tipping load	30,717.10 lbs (13,933.06 kg)
Hydraulic System Fluid Capacity	35.70 gal (135.12 l)
Operating Voltage	24 volts
Operating Weight	43,594.30 lbs (19,774.07 kg)
Payload	15,359.70 lbs (6,967.05 kg)
Rated Bucket Capacity	4.10 cu yd (3.13 cu m)
Rear Axle Oscillation	11.5 degrees
Rear Axle/Diff Fluid Capacity	9.30 gal (35.20 l)
Transmission Fluid Capacity	10.90 gal (41.26 l)
Turning Radius	21.60 ft (6.58 m)

Transmission

JCB 457 ZX Wheel Loader Transmission specifications
Max Speed - Forward	22.50 mph (36.21 kph)
Max Speed - Reverse	14.70 mph (23.66 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	4 speed non-lock up converter ZF 4WG210

Weights

JCB 457 ZX Wheel Loader Weights specifications
Operating Weight	42,289.00 lbs (19,181.99 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon