Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout Force | 16592 lbs (7,526 kg) |
Bucket Capacity - heaped | 2.5 cu yd (2 cu m) |
Bucket Capacity - struck | 2.1 cu yd (2 cu m) |
Dump Clearance at Max Lift | 8.7 ft (3 m) |
Fork Tine Length | 4.1 ft (1 m) |
Ground Clearance | 1.2 ft (0 m) |
Height - Top of Cab | 10.3 ft (3 m) |
Hinge Pin Max Height | 11.9 ft (4 m) |
Hook Reach at Max Lift - extended | 11.6 ft (4 m) |
Length w/ Bucket on Ground | 22.1 ft (7 m) |
Length with out Forks on Ground | 19 ft (6 m) |
Max Lift Height | 11.2 ft (3 m) |
Reach at Max Height and Dump | 3.6 ft (1 m) |
Wheelbase | 9.1 ft (3 m) |
Width Over Tires | 7.7 ft (2 m) |
Aspiration | Turbocharged |
Displacement | 276 cu in (0 cu m) |
Engine Model | 4045T |
Gross Power | 115.4 hp (86 kw) |
Max Torque | 325 lbs ft |
Net Power | 110 hp (82 kw) |
Number of Cylinders | 4 |
Power Measured @ | 2200 rpm |
Torque Measured @ | 1400 rpm |
Dump Time | 1.1 seconds |
Lower Time | 2.6 seconds |
Pump Flow Capacity | 36 gpm (136 lpm) |
Pump Type | Piston Pump |
Raise Time | 5 seconds |
Relief Valve Setting | 3600 psi |
Alternator Supplied Amperage | 55 amps |
Cooling System Fluid Capacity | 5.1 gal (19 l) |
Engine Oil Capacity | 3.4 gal (13 l) |
Front Diff Fluid Capacity | 4 gal (15 l) |
Fuel Capacity | 48 gal (182 l) |
Hydraulic System Fluid Capacity | 28.1 gal (106 l) |
Operating Voltage | 24 volts |
Operating Weight | 21457 lbs (9,733 kg) |
Rear Axle Oscillation | 24 degrees |
Rear Diff Fluid Capacity | 4 gal (15 l) |
Static Tipping Load - Bucket | 16021 lbs (7,267 kg) |
Static Tipping Load - Forks | 9621 lbs (4,364 kg) |
Static Tipping Load - Material Handler | 7145 lbs (3,241 kg) |
Tire Size | 17.5-25 |
Transmission Fluid Capacity | 3.4 gal (13 l) |
Turning Radius | 15.5 ft (5 m) |
Max Speed Forward | 24.8 mph (40 kph) |
Max Speed Reverse | 16.3 mph (26 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 3 |
Transmission Type | Power Shift |