Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 26,519.00 lbs (12,028.83 kg) |
| Bucket Capacity - heaped | 4.00 cu yd (3.06 cu m) |
| Bucket Capacity - struck | 3.50 cu yd (2.68 cu m) |
| Bucket Width | 10.00 ft (3.05 m) |
| Dump Clearance at Max Raise | 9.20 ft (2.80 m) |
| Ground Clearance | 1.60 ft (0.49 m) |
| Height - Top of Cab | 11.30 ft (3.44 m) |
| Hinge Pin - Max Height | 13.60 ft (4.15 m) |
| Length with Bucket on Ground | 28.00 ft (8.53 m) |
| Reach at Max Lift and Dump | 4.00 ft (1.22 m) |
| Wheelbase | 10.70 ft (3.26 m) |
| Width Over Tires | 9.50 ft (2.90 m) |
| Aspiration | Turbocharged charge air cooled |
| Displacement | 414.00 cu in (6,784.26 cu cm) |
| Engine Model | 6068H Tier III certified |
| Net Power | 232.00 hp (173.01 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1700 rpm |
| Torque Measured @ | 1400 rpm |
| Torque Rise | 55% |
| Dump Time | 1.9 seconds |
| Lower Time | 2.8 seconds |
| Pump Flow Capacity | 81.90 gpm (309.99 lpm) |
| Pump Type | Variable axial piston |
| Raise Time | 6.1 seconds |
| Relief Valve Setting | 3650 psi |
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 7.80 gal (29.52 l) |
| Engine Oil Fluid Capacity | 6.50 gal (24.60 l) |
| Front Axle/Diff Fluid Capacity | 5.90 gal (22.33 l) |
| Fuel Capacity | 93.00 gal (352.01 l) |
| Hydraulic System Fluid Capacity | 29.10 gal (110.14 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 43,563.40 lbs (19,760.05 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 5.90 gal (22.33 l) |
| Static Tipping Weight | 29,034.90 lbs (13,170.03 kg) |
| Tire Size | 23.5 R25 |
| Transmission Fluid Capacity | 6.10 gal (23.09 l) |
| Turning Radius | 18.30 ft (5.58 m) |
| Max Speed - Forward | 22.80 mph (36.69 kph) |
| Max Speed - Reverse | 15.50 mph (24.94 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | Countershaft powershift |