Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 39,570.00 lbs (17,948.67 kg) |
| Bucket Capacity - heaped | 6.10 cu yd (4.66 cu m) |
| Bucket Capacity - struck | 5.30 cu yd (4.05 cu m) |
| Bucket Width | 10.80 ft (3.29 m) |
| Dump Clearance at Max Raise | 12.00 ft (3.66 m) |
| Ground Clearance | 1.60 ft (0.49 m) |
| Height - Top of Cab | 11.50 ft (3.51 m) |
| Hinge Pin - Max Height | 16.00 ft (4.88 m) |
| Length with Bucket on Ground | 32.10 ft (9.78 m) |
| Reach at Max Lift and Dump | 5.40 ft (1.65 m) |
| Wheelbase | 11.40 ft (3.47 m) |
| Width Over Tires | 10.10 ft (3.08 m) |
| Aspiration | Turbocharged charge air cooled |
| Displacement | 824.00 cu in (13,502.97 cu cm) |
| Engine Model | 6135H Tier III certified |
| Net Power | 333.00 hp (248.32 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1600 rpm |
| Torque Measured @ | 900 rpm |
| Torque Rise | 59% |
| Dump Time | 1.3 seconds |
| Lower Time | 2.6 seconds |
| Pump Flow Capacity | 135.60 gpm (513.25 lpm) |
| Pump Type | two variable displacement load-sensing axial piston |
| Raise Time | 5.9 seconds |
| Relief Valve Setting | 3650 psi |
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 12.60 gal (47.69 l) |
| Engine Oil Fluid Capacity | 10.10 gal (38.23 l) |
| Front Axle/Diff Fluid Capacity | 12.20 gal (46.18 l) |
| Fuel Capacity | 124.10 gal (469.72 l) |
| Hydraulic System Fluid Capacity | 42.10 gal (159.35 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 56,634.60 lbs (25,689.05 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 12.20 gal (46.18 l) |
| Static Tipping Weight | 37,983.50 lbs (17,229.05 kg) |
| Tire Size | 26.5 R 25 |
| Transmission Fluid Capacity | 7.40 gal (28.01 l) |
| Turning Radius | 19.50 ft (5.94 m) |
| Max Speed - Forward | 24.90 mph (40.07 kph) |
| Max Speed - Reverse | 18.80 mph (30.26 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | Countershaft powershift |