John Deere 824K Z-Bar Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: John Deere ➔
Model: 824K Z-Bar ➔

Bucket

John Deere 824K Z-Bar Wheel Loader Bucket specifications
Breakout Force	41,678.00 lbs (18,904.85 kg)
Bucket Capacity - Heaped	6.02 cu yd
Bucket Capacity - Struck	5.24 cu yd
Bucket Width	10.73 ft (3.27 m)
Dump Clearance At Max Raise	10.47 ft (3.19 m)

Dimensions

John Deere 824K Z-Bar Wheel Loader Dimensions specifications
Ground Clearance	1.51 ft (0.46 m)
Height To Top Of Cab	11.49 ft (3.50 m)
Hinge Pin - Max Height	14.70 ft (4.48 m)
Length With Bucket On Ground	30.39 ft (9.26 m)
Reach At Max Lift And Dump	4.20 ft (1.28 m)
Wheelbase	11.36 ft (3.46 m)
Width Over Tires	10.06 ft (3.07 m)

Engine

John Deere 824K Z-Bar Wheel Loader Engine specifications
Aspiration	Turbocharged charge air cooled
Displacement	824.00 cu in (13,502.97 cu cm)
Engine Make	2240
Engine Model	6135H, Tier III certified
Max Torque	1,194.00 lbs ft (1,618.83 nm)
Net Power	333.00 hp (248.32 kw)
Number Of Cylinders	6
Power Measured @	1600 rpm
Torque Measured @	900 rpm
Torque Rise	59 %

Hydraulic System

John Deere 824K Z-Bar Wheel Loader Hydraulic System specifications
Dump Time	1.3 sec
Lower Time	2.5 sec
Pump Flow Capacity	135.60 gpm (513.25 lpm)
Pump Type	two variable displacement, load-sensing axial piston
Raise Time	5.9 sec
Relief Valve Setting	3650 psi

Operational

John Deere 824K Z-Bar Wheel Loader Operational specifications
Alternator Supplied Amperage	80 amps
Cooling System Fluid Capacity	12.60 gal (47.69 l)
Engine Oil Fluid Capacity	10.10 gal (38.23 l)
Front Axle/Diff Fluid Capacity	12.20 gal (46.18 l)
Fuel Capacity	124.10 gal (469.72 l)
Hydraulic System Fluid Capacity	42.10 gal (159.35 l)
Operating Voltage	24 V
Operating Weight	57,783.20 lbs (26,210.05 kg)
Rear Axle Oscillation	26 degrees
Rear Axle/Diff Fluid Capacity	12.20 gal (46.18 l)
Static Tipping Weight	45,212.40 lbs (20,508.03 kg)
Tire Size	26.5 R 25
Transmission Fluid Capacity	7.40 gal (28.01 l)
Turning Radius	19.50 ft (5.94 m)

Transmission

John Deere 824K Z-Bar Wheel Loader Transmission specifications
Max Speed - Forward	24.90 mph (40.07 kph)
Max Speed - Reverse	18.80 mph (30.26 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	3
Transmission Type	Countershaft, powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon