John Deere 844K Z-Bar Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: John Deere ➔
Model: 844K Z-Bar ➔

Bucket

John Deere 844K Z-Bar Wheel Loader Bucket specifications
Breakout Force	47,860.00 lbs (21,708.96 kg)
Bucket Capacity - Heaped	7.2 cu yd
Bucket Capacity - Struck	6.15 cu yd
Bucket Width	11.36 ft (3.46 m)
Dump Clearance At Max Raise	10.90 ft (3.32 m)

Dimensions

John Deere 844K Z-Bar Wheel Loader Dimensions specifications
Ground Clearance	1.51 ft (0.46 m)
Height To Top Of Cab	12.34 ft (3.76 m)
Hinge Pin - Max Height	15.16 ft (4.62 m)
Length With Bucket On Ground	31.67 ft (9.65 m)
Reach At Max Lift And Dump	4.89 ft (1.49 m)
Wheelbase	12.14 ft (3.70 m)
Width Over Tires	10.48 ft (3.19 m)

Engine

John Deere 844K Z-Bar Wheel Loader Engine specifications
Aspiration	Turbocharged charge air cooled
Displacement	824.00 cu in (13,502.97 cu cm)
Engine Make	2240
Engine Model	6135H, Tier III certified
Max Torque	1,323.00 lbs ft (1,793.72 nm)
Net Power	380.00 hp (283.37 kw)
Number Of Cylinders	6
Power Measured @	1600 rpm
Torque Measured @	900 rpm
Torque Rise	44 %

Hydraulic System

John Deere 844K Z-Bar Wheel Loader Hydraulic System specifications
Dump Time	1.9 sec
Lower Time	3.5 sec
Pump Flow Capacity	164.10 gpm (621.12 lpm)
Pump Type	two variable displacement, load sensing axial piston
Raise Time	5.9 sec
Relief Valve Setting	3500 psi

Operational

John Deere 844K Z-Bar Wheel Loader Operational specifications
Alternator Supplied Amperage	80 amps
Cooling System Fluid Capacity	13.80 gal (52.23 l)
Engine Oil Fluid Capacity	10.10 gal (38.23 l)
Front Axle/Diff Fluid Capacity	14.60 gal (55.26 l)
Fuel Capacity	146.10 gal (552.99 l)
Hydraulic System Fluid Capacity	64.50 gal (244.13 l)
Operating Voltage	24 V
Operating Weight	70,629.50 lbs (32,037.04 kg)
Rear Axle Oscillation	26 degrees
Rear Axle/Diff Fluid Capacity	15.60 gal (59.05 l)
Static Tipping Weight	51,489.00 lbs (23,355.05 kg)
Tire Size	29.5 R 25
Transmission Fluid Capacity	12.00 gal (45.42 l)
Turning Radius	20.70 ft (6.31 m)

Transmission

John Deere 844K Z-Bar Wheel Loader Transmission specifications
Max Speed - Forward	25.20 mph (40.56 kph)
Max Speed - Reverse	17.00 mph (27.36 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	3
Transmission Type	Countershaft, powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon