John Deere 904 X-Tier Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: John Deere ➔
Model: 904 X-Tier ➔

Axles And Brakes

John Deere 904 X-Tier Wheel Loader Axles And Brakes specifications
Final Drives	Heavy-duty mid-board planetary - Starting 2026
Parking Brake (ISO 3450)	Automatic spring applied, hydraulically released, sealed wet multi disc - Starting 2026
Rear Axle Oscillation, Distance Each Direction	8.0 degrees - Starting 2026
Rear Axle Oscillation, Stop To Stop	16.0 degrees - Starting 2026
Service Brakes (ISO 3450)	Outboard, forced oil cooled, multi disc - Starting 2026
Standard Differentials Front	Conventional front and rear axles - Starting 2026
Standard Differentials Rear	Conventional front and rear axles - Starting 2026
Tire Size Used To Measure Oscillation	875/65R29 L3 - Starting 2026

Cooling

John Deere 904 X-Tier Wheel Loader Cooling specifications
Fan Drive Type	Hydraulically driven, proportionally controlled, fan aft of coolers, automatic reversing fan drive - Starting 2026

Electrical And Lighting

John Deere 904 X-Tier Wheel Loader Electrical And Lighting specifications
Battery Capacity Per Each	1400.0 CCA - Starting 2026
Battery Voltage	12.0 v - Starting 2026
Number Of Batteries	2 - Starting 2026
Standard Alternator Rating	150.0 amp - Starting 2026
System Type	24 volt with 150-amp alternator - Starting 2026

Engine

John Deere 904 X-Tier Wheel Loader Engine specifications
Air Cleaner	Dual-element dry type, restriction indicator in cab monitor for service; additional centrifugal engine pre-cleaner - Starting 2026
Aspiration	Single turbocharged, charge air cooled - Starting 2026
Cylinders	6 - Starting 2026
Displacement	827.00 cu in (13,552.13 cu cm) - Starting 2026
Fuel System (Electronically Controlled)	Electronic High Pressure Common Rail (HPCR) - Starting 2026
Lubrication	Full-flow spin-on filter and integral cooler - Starting 2026
Manufacturer	John Deere - Starting 2026
Net Peak Power	1400.0 rpm - Starting 2026
Net Peak Power At Rated RPM (ISO 9249)	442.00 hp (329.60 kw) - Starting 2026
Net Peak Torque	1300.0 rpm - Starting 2026
Net Peak Torque At Rated RPM (ISO 9249)	1,725.00 lbs ft (2,338.76 nm) - Starting 2026
Net Torque Rise	53.0 % - Starting 2026
Non-Road Emission Standards	EPA Tier 4/EU Stage V - Starting 2026
Valves Per Cylinder	4 - Starting 2026

Hydraulic System And Steering

John Deere 904 X-Tier Wheel Loader Hydraulic System And Steering specifications
Hydraulic Dump Cycle Time	2.3 s - Starting 2026
Hydraulic Lower (Power Down) Cycle Time	3.6 s - Starting 2026
Hydraulic Raise Cycle Time	5.9 s - Starting 2026
Hydraulic Total Cycle Time	11.8 s - Starting 2026
Loader Controls	2-function valve; single- or dual-lever controls; control lever lockout feature - Starting 2026
Max Rated Flow At Rated RPM	52.70 gpm (199.47 lpm) - Starting 2026
Pump (Steering)	1 variable-displacement, load-sensing axial-piston pumps; closed-center system - Starting 2026
Pump Type And System (Loader And Steering)	2 variable-displacement, load-sensing axial-piston pumps; closed-center system - Starting 2026
Rated RPM	2000.0 rpm - Starting 2026
Steering Articulation Angle Each Direction	40.0 degrees - Starting 2026
Steering Articulation Full Arc Angle	80.0 degrees - Starting 2026
Steering Type (ISO 5010)	Power, fully hydraulic; single-lever control and adjustable wristrest with conventional steering wheel override - Starting 2026
System Pressure At Max Rated Flow	1000.0 psi - Starting 2026
System Relief Pressure (Loader And Steering)	3611.0 psi - Starting 2026
Turning Radius (Measured To Centerline Of Outside Tire)	20.67 ft, in. - Starting 2026

Key Specs

John Deere 904 X-Tier Wheel Loader Key Specs specifications
Net Peak Power	1400.0 rpm - Starting 2026
Net Peak Power At Rated RPM (ISO 9249)	442.00 hp (329.60 kw) - Starting 2026
Net Peak Torque	1300.0 rpm - Starting 2026
Net Peak Torque At Rated RPM (ISO 9249)	1,725.00 lbs ft (2,338.76 nm) - Starting 2026

Serviceability

John Deere 904 X-Tier Wheel Loader Serviceability specifications
Axle Oil Without Coolers (Front And Rear, Each) Refill Capacity	18.00 gal (68.13 l) - Starting 2026
Cooling System Refill Capacity	64.0 qt - Starting 2026
Diesel-Exhaust Fluid (DEF) Refill Capacity	27.6 qt - Starting 2026
Engine Oil With Vertical Spin-On Filter Refill Capacity	64.4 qt - Starting 2026
Fuel Tank (With Lockable Cap) Refill Capacity	141.00 gal (533.69 l) - Starting 2026
Hydraulic Reservoir With Filter Refill Capacity	51.70 gal (195.68 l) - Starting 2026
Parking Brake Oil (Wet Disc) Refill Capacity	11.84 oz. - Starting 2026
Transmission Reservoir With Vertical Filter Refill Capacity	14.00 gal (52.99 l) - Starting 2026

Transmission System

John Deere 904 X-Tier Wheel Loader Transmission System specifications
Operator Interface	Steering-column or joystick-mounted F-N-R and gear-select lever; quick-shift button on hydraulic lever - Starting 2026
Shift Control	Electronically modulated, adaptive, load and speed dependent - Starting 2026
Shift Modes	Auto (1st–4th or 2nd–4th); quick-shift button with 2 selectable modes: kick-down or kick-up/down - Starting 2026
Type	Electric Variable Transmission (EVT) - Starting 2026

Wheels And Tires

John Deere 904 X-Tier Wheel Loader Wheels And Tires specifications
Tire Size Used To Measure	875/65R29, 1 Star L-3 - Starting 2026
Tread Width On Standard Tires	96.10 in (244.09 cm) - Starting 2026
Width Over Tires On Standard Tires	129.50 in (328.93 cm) - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon