Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 14,330.00 lbs (6,499.99 kg) |
| Bucket Capacity - heaped | 1.90 cu yd (1.45 cu m) |
| Bucket Capacity - struck | 1.60 cu yd (1.22 cu m) |
| Bucket Width | 7.80 ft (2.38 m) |
| Dump Clearance at Max Raise | 9.00 ft (2.74 m) |
| Ground Clearance | 1.40 ft (0.43 m) |
| Height - Top of Cab | 10.30 ft (3.14 m) |
| Hinge Pin - Max Height | 11.50 ft (3.51 m) |
| Length with Bucket on Ground | 20.00 ft (6.10 m) |
| Reach at Max Lift and Dump | 3.20 ft (0.98 m) |
| Wheelbase | 8.60 ft (2.62 m) |
| Width Over Tires | 7.50 ft (2.29 m) |
| Aspiration | natural |
| Displacement | 274.40 cu in (4,496.62 cu cm) |
| Engine Model | B4.5T |
| Make | Cummins |
| Net Power | 96.00 hp (71.59 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1500 rpm |
| Dump Time | 1.2 seconds |
| Lower Time | 3 seconds |
| Pump Flow Capacity | 27.00 gpm (102.20 lpm) |
| Pump Type | gear type |
| Raise Time | 6 seconds |
| Relief Valve Setting | 3000 psi |
| Alternator Supplied Amperage | 50 amps |
| Cooling System Fluid Capacity | 10.50 gal (39.74 l) |
| Engine Oil Fluid Capacity | 3.00 gal (11.36 l) |
| Front Axle/Diff Fluid Capacity | 4.80 gal (18.17 l) |
| Fuel Capacity | 31.80 gal (120.36 l) |
| Hydraulic System Fluid Capacity | 22.50 gal (85.16 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 17,504.80 lbs (7,940.05 kg) |
| Rated Bucket Capacity | 1.80 cu yd (1.38 cu m) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 4.80 gal (18.17 l) |
| Static Tipping Weight | 14,837.20 lbs (6,730.05 kg) |
| Tire Size | 17.5x25-12PR (L-2) |
| Transmission Fluid Capacity | 5.30 gal (20.06 l) |
| Turning Radius | 17.10 ft (5.21 m) |
| Max Speed - Forward | 21.10 mph (33.96 kph) |
| Max Speed - Reverse | 21.10 mph (33.96 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Transmission Type | full power shift |
| Operating Weight | 17,500.00 lbs (7,937.88 kg) |