Kawasaki 65TM-2 Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Kawasaki ➔
Model: 65TM-2 ➔

Bucket

Kawasaki 65TM-2 Wheel Loader Bucket specifications
Breakout Force	22,597.00 lbs (10,249.84 kg)
Bucket Capacity - Heaped	2.7 cu yd
Bucket Capacity - Struck	2.3 cu yd

Dimensions

Kawasaki 65TM-2 Wheel Loader Dimensions specifications
Dump Clearance At Max Lift	9.06 ft (2.76 m)
Fork Tine Length	4.00 ft (1.22 m)
Ground Clearance	1.46 ft (0.45 m)
Height At Hook Max Reach	6.80 ft (2.07 m)
Height To Top Of Cab	10.73 ft (3.27 m)
Hinge Pin Max Height	12.75 ft (3.89 m)
Hook Height At Max Lift - Extended	22.13 ft (6.75 m)
Hook Height At Max Lift - Standard	18.66 ft (5.69 m)
Hook Max Reach - Extended	19.82 ft (6.04 m)
Hook Max Reach - Standard	14.82 ft (4.52 m)
Hook Reach At Max Lift - Extended	13.51 ft (4.12 m)
Hook Reach At Max Lift - Standard	9.91 ft (3.02 m)
Length W/ Bucket On Ground	23.56 ft (7.18 m)
Length With Out Forks On Ground	25.04 ft (7.63 m)
Max Lift Height	12.16 ft (3.71 m)
Reach At Max Height And Dump	4.19 ft (1.28 m)
Wheelbase	9.52 ft (2.90 m)
Width Over Tires	7.90 ft (2.41 m)

Engine

Kawasaki 65TM-2 Wheel Loader Engine specifications
Aspiration	turbocharged
Displacement	359.00 cu in (5,882.97 cu cm)
Engine Make	2347
Engine Model	B5.9-C
Max Torque	383.00 lbs ft (519.27 nm)
Net Power	134.00 hp (99.93 kw)
Number Of Cylinders	6
Power Measured @	2400 rpm
Torque Measured @	1400 rpm

Hydraulic System

Kawasaki 65TM-2 Wheel Loader Hydraulic System specifications
Dump Time	2.2 sec
Lower Time	2.9 sec
Pump Flow Capacity	16.10 gpm (60.94 lpm)
Pump Type	gear type
Raise Time	5.8 sec
Relief Valve Setting	2770 psi

Operational

Kawasaki 65TM-2 Wheel Loader Operational specifications
Alternator Supplied Amperage	50 amps
Cooling System Fluid Capacity	11.20 gal (42.39 l)
Engine Oil Capacity	3.80 gal (14.38 l)
Front Diff Fluid Capacity	5.30 gal (20.06 l)
Fuel Capacity	46.30 gal (175.25 l)
Hydraulic System Fluid Capacity	26.50 gal (100.30 l)
Operating Voltage	24 V
Operating Weight	25,375.30 lbs (11,510.06 kg)
Rear Axle Oscillation	12 degrees
Rear Diff Fluid Capacity	5.30 gal (20.06 l)
Static Tipping Load - Bucket	16,953.60 lbs (7,690.03 kg)
Static Tipping Load - Forks	12,875.00 lbs (5,840.01 kg)
Static Tipping Load - Material Handler	8,620.10 lbs (3,910.02 kg)
Tire Size	20.5x25-12PR (L-2)
Transmission Fluid Capacity	8.00 gal (30.28 l)
Turning Radius	18.80 ft (5.73 m)

Transmission

Kawasaki 65TM-2 Wheel Loader Transmission specifications
Max Speed Forward	23.10 mph (37.18 kph)
Max Speed Reverse	23.10 mph (37.18 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	4
Transmission Type	full powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon