Kawasaki 65TMV Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Kawasaki ➔
Model: 65TMV ➔

Bucket

Kawasaki 65TMV Wheel Loader Bucket specifications
Breakout Force	24,100.00 lbs (10,931.59 kg)
Bucket Capacity - Heaped	2.8 cu yd
Bucket Capacity - Struck	2.3 cu yd

Dimensions

Kawasaki 65TMV Wheel Loader Dimensions specifications
Dump Clearance At Max Lift	9.68 ft (2.95 m)
Fork Tine Length	4.00 ft (1.22 m)
Ground Clearance	1.46 ft (0.45 m)
Height	10.58 ft (3.23 m)
Height At Hook Max Reach	6.81 ft (2.08 m)
Height To Top Of Cab	10.73 ft (3.27 m)
Hinge Pin Max Height	13.06 ft (3.98 m)
Hook Height At Max Lift - Extended	23.46 ft (7.15 m)
Hook Height At Max Lift - Standard	19.08 ft (5.82 m)
Hook Max Reach - Extended	13.67 ft (4.17 m)
Hook Max Reach - Standard	7.49 ft (2.28 m)
Hook Reach At Max Lift - Extended	13.83 ft (4.22 m)
Hook Reach At Max Lift - Standard	9.42 ft (2.87 m)
Length	23.58 ft (7.19 m)
Length W/ Bucket On Ground	23.66 ft (7.21 m)
Length With Out Forks On Ground	25.10 ft (7.65 m)
Max Lift Height	12.59 ft (3.84 m)
Reach At Max Height And Dump	3.60 ft (1.10 m)
Weight	26,410.00 lbs (11,979.39 kg)
Wheelbase	9.52 ft (2.90 m)
Width	7.75 ft (2.36 m)
Width Over Tires	7.90 ft (2.41 m)

Engine

Kawasaki 65TMV Wheel Loader Engine specifications
Aspiration	turbocharged 7 intercooler
Displacement	359.00 cu in (5,882.97 cu cm)
Engine Make	2347
Engine Model	6BTAA5.9
Max Torque	401.00 lbs ft (543.68 nm)
Net Power	134.00 hp (99.93 kw)
Number Of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1500 rpm

Hydraulic System

Kawasaki 65TMV Wheel Loader Hydraulic System specifications
Dump Time	2.2 sec
Lower Time	2.9 sec
Pump Flow Capacity	27.70 gpm (104.84 lpm)
Pump Type	gear type
Raise Time	5.8 sec
Relief Valve Setting	3000 psi

Operational

Kawasaki 65TMV Wheel Loader Operational specifications
Alternator Supplied Amperage	50 amps
Cooling System Fluid Capacity	11.40 gal (43.15 l)
Engine Oil Capacity	4.30 gal (16.28 l)
Front Diff Fluid Capacity	6.70 gal (25.36 l)
Fuel Capacity	58.70 gal (222.18 l)
Hydraulic System Fluid Capacity	26.50 gal (100.30 l)
Operating Voltage	24 V
Operating Weight	26,411.40 lbs (11,980.02 kg)
Rear Axle Oscillation	12 degrees
Rear Diff Fluid Capacity	6.70 gal (25.36 l)
Static Tipping Load - Bucket	18,166.10 lbs (8,240.01 kg)
Static Tipping Load - Forks	13,602.60 lbs (6,170.04 kg)
Static Tipping Load - Material Handler	8,862.60 lbs (4,020.01 kg)
Tire Size	20.5x25-12PR (L-2)
Transmission Fluid Capacity	8.00 gal (30.28 l)
Turning Radius	18.70 ft (5.70 m)

Transmission

Kawasaki 65TMV Wheel Loader Transmission specifications
Max Speed Forward	24.70 mph (39.75 kph)
Max Speed Reverse	24.70 mph (39.75 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	4
Transmission Type	full power shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon