Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Emergency Brake | Parking brake is commonly used |
|---|---|
| Parking Brake | Wet, multi-disc brake on transfer output shaft |
| Service Brake | Hydraulically actuated, wet disc brakes actuate on four wheels |
| Axle Each (Front & Rear) | 4.80 gal (18.17 l) |
|---|---|
| Cooling System | 4.50 gal (17.03 l) |
| Engine Oil | 4.10 gal (15.52 l) |
| Fuel Tank | 46.80 gal (177.14 l) |
| Hydraulic System | 15.40 gal (58.29 l) |
| Torque Converter, Transmission And Retarder Cooling | 1.40 gal (5.30 l) |
| Ground Clearance | 1.63 ft (0.50 m) |
|---|---|
| Height To Top Of Cab | 10.44 ft (3.18 m) |
| Length | 7,310.00 mm (287.80 in) |
| Wheelbase | 111.82 in (284.02 cm) |
| Width Over Tyres | 97.25 in (247.01 cm) |
| Brake | Hydraulic, Wet disc |
|---|---|
| Maximum Speeds, Fwd / Rev | 23.70 mph (38.14 kph) |
| Number Of Speeds - Forward | 4 |
| Number Of Speeds - Reverse | 4 |
| Ride Control System | Standard |
| Transmission Type | Hydrostatic |
| Air Cleaner | Dry type with double elements and dust evacuator, plus dust indicator |
|---|---|
| Aspiration | Turbocharged, aftercooled |
| Bore | 4.30 in (10.92 cm) |
| Displacement | 272.20 cu in (4,460.57 cu cm) |
| Engine Model | Komatsu SAA4D107E-1 |
| Engine Type | Water-cooled, 4-cycle |
| Fan Drive Method | Hydraulic |
| Filter | Full-flow type |
| Fuel Type | Direct injection |
| Governor | All-speed, electronic |
| Horsepower, Gross-Sae J1995 | 127.40 hp (95.00 kw) |
| Horsepower, Net-Iso 9249 | 126.10 hp (94.03 kw) |
| Horsepower, Net-Sae J1349 | 126.10 hp (94.03 kw) |
| Lubrication Method | Gear pump, force-lubrication |
| Number Of Cylinders | 4 |
| Rated Power | ?2000 rpm |
| Stroke | 4.90 in (12.45 cm) |
| Differential Gear | Torque proportioning |
|---|---|
| Drive System | Four-wheel drive |
| Final Reduction Gear | Planetary gear, single reduction |
| Front | Fixed, semi-floating |
| Rear | Center-pin support, semi-floating, 24? total oscillation |
| Reduction Gear | Spiral bevel gear |
| Bore | 70.00 mm (2.76 in) |
|---|---|
| Control Positions Boom | Raise, hold, lower, and float |
| Control Positions Bucket | Tilt-back, hold, and dump |
| Control Valve | 3-spool type |
| Dump Time | 1.6 sec |
| Hydraulic Cylinders Type | Double-acting, piston type |
| Hydraulic Pump | Gear type pump |
| Loader Control Capacity | 14.30 gpm (54.13 lpm) |
| Loader Control Type | Gear |
| Lower Time | 3.3 sec |
| Raise Time | 5.7 sec |
| Relief Valve Setting | 20.6 MPa 210 kgf/cm2 3,000 psi |
| Steering Pump Type | Gear |
| Steering System Capacity | 22.50 gpm (85.16 lpm) |
| Stroke | 453.00 mm (17.83 in) |
| Breakout Force | 9810 kgf |
|---|---|
| Bucket Capacity Range – Sae | On request |
| Bucket Description | GP Bucket, bolt on edge |
| Bucket Link Type | Z-Bar |
| Bucket Width | 8.40 ft (2.56 m) |
| Dump Clearance, @45 Degrees Dump Angle | 32.20 ft (9.81 m) |
| Dump Reach, @45 Degrees Dump Angle | 3.60 ft (1.10 m) |
| Standard Bucket Capacity – Sae | 2.7 cu yd |
| Static Tipping Load,Full Turn | 15,730.00 lbs (7,135.02 kg) |
| Minimum Turning Radius At The Centre Of Outside Tire | 16.80 ft (5.12 m) |
|---|---|
| Steering Angle | 38 degrees |
| Steering System Type | Full-hydraulic power steering |
| Transmission Type | Hydrostatic, 1 pump, 2 motors with speed range select |
|---|
| Standard Fitment Size | 20.5 R25 L3 |
|---|
| Operating Weight | 25,606.70 lbs (11,615.02 kg) |
|---|