Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Emergency Brake | Parking brake is commonly used |
|---|---|
| Parking Brake | Wet, multi-disc brake on transfer output shaft |
| Service Brake | Hydraulically actuated, wet disc brakes actuate on four wheels |
| Axle Each (Front & Rear) | 4.80 gal (18.17 l) |
|---|---|
| Cooling System | 5.90 gal (22.33 l) |
| Engine Oil | 6.10 gal (23.09 l) |
| Fuel Tank | 49.20 gal (186.22 l) |
| Hydraulic System | 17.70 gal (66.99 l) |
| Torque Converter, Transmission And Retarder Cooling | 1.40 gal (5.30 l) |
| Ground Clearance | 1.53 ft (0.47 m) |
|---|---|
| Height To Top Of Cab | 10.50 ft (3.20 m) |
| Length | 7,205.00 mm (283.66 in) |
| Wheelbase | 114.18 in (290.02 cm) |
| Width Over Tyres | 97.25 in (247.01 cm) |
| Brake | Hydraulic, Wet disc |
|---|---|
| Maximum Speeds, Fwd / Rev | 23.70 mph (38.14 kph) |
| Number Of Speeds - Forward | 4 |
| Number Of Speeds - Reverse | 4 |
| Ride Control System | Standard |
| Transmission Type | Hydrostatic |
| Air Cleaner | Dry type with double elements and dust evacuator, plus dust indicator |
|---|---|
| Aspiration | Turbocharged, aftercooled |
| Bore | 4.30 in (10.92 cm) |
| Displacement | 408.30 cu in (6,690.85 cu cm) |
| Engine Model | Komatsu SAA6D107E-1 |
| Engine Type | Water-cooled, 4-cycle |
| Fan Drive Method | Hydraulic |
| Filter | Full-flow type |
| Fuel Type | Direct injection |
| Governor | All-speed, electronic |
| Horsepower, Gross-Sae J1995 | 139.50 hp (104.03 kw) |
| Horsepower, Net-Iso 9249 | 138.20 hp (103.06 kw) |
| Horsepower, Net-Sae J1349 | 138.20 hp (103.06 kw) |
| Lubrication Method | Gear pump, force-lubrication |
| Number Of Cylinders | 6 |
| Rated Power | ?2000 |
| Stroke | 4.90 in (12.45 cm) |
| Differential Gear | Torque proportioning |
|---|---|
| Drive System | Four-wheel drive |
| Final Reduction Gear | Planetary gear, single reduction |
| Front | Fixed, semi-floating |
| Rear | Center-pin support, semi-floating, 24? total oscillation |
| Reduction Gear | Spiral bevel gear |
| Bore | 2.80 in (7.11 cm) |
|---|---|
| Control Positions Boom | Raise, hold, lower, and float |
| Control Positions Bucket | Tilt-back, hold, and dump |
| Control Valve | 3-spool type |
| Dump Time | 1.6 sec |
| Hydraulic Cylinders Type | Double-acting, piston type |
| Hydraulic Pump | Gear type pump |
| Loader Control Capacity | 20.70 gpm (78.35 lpm) |
| Loader Control Relief Valve Setting | 3000 psi |
| Loader Control Type | Gear |
| Lower Time | 3.3 sec |
| Number Of Cylinders | 2 |
| Raise Time | 5.7 sec |
| Steering Pump Type | Gear |
| Steering System Capacity | 29.10 gpm (110.14 lpm) |
| Steering System Relief Valve Setting | 2700 psi |
| Stroke | 453.00 mm (17.83 in) |
| Breakout Force | 10730 kgf |
|---|---|
| Bucket Capacity Range – Sae | On request |
| Bucket Description | GP Bucket, bolt on edge |
| Bucket Link Type | Z-Bar |
| Bucket Width | 8.40 ft (2.56 m) |
| Dump Clearance, @45 Degrees Dump Angle | 9.30 ft (2.83 m) |
| Dump Reach, @45 Degrees Dump Angle | 3.60 ft (1.10 m) |
| Standard Bucket Capacity – Sae | 3.3 cu yd |
| Static Tipping Load,Full Turn | 17,714.20 lbs (8,035.04 kg) |
| Minimum Turning Radius At The Centre Of Outside Tire | 17.00 ft (5.18 m) |
|---|---|
| Steering Angle | 38 degrees |
| Steering System Type | Full-hydraulic power steering |
| Transmission Type | Hydrostatic, 1 pump, 2 motors with speed range select |
|---|
| Standard Fitment Size | 20.5 R25 L3 |
|---|
| Operating Weight | 28,340.50 lbs (12,855.05 kg) |
|---|