Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Drive System | Four-wheel drive |
|---|---|
| Front | Fixed, semi-floating |
| Rear | Center-pin support, semi-floating, 24 ? total oscillation |
| Emergency Brake | Parking brake is commonly used |
|---|---|
| Parking Brake | Wet |
| Service Brake | Hydraulically actuated |
| Cooling System | 8.50 gal (32.17 l) |
|---|---|
| Engine Oil | 8.00 gal (30.28 l) |
| Front Axle | 2,990.20 cu in (49,000.71 cu cm) |
| Fuel Tank | 85.90 gal (325.13 l) |
| Hydraulic System | 36.80 gal (139.29 l) |
| Rear Axle | 10.60 gal (40.12 l) |
| Torque Converter, Transmission And Retarder Cooling | 14.30 gal (54.13 l) |
| Ground Clearance | 1.50 ft (0.46 m) |
|---|---|
| Height | 11.08 ft (3.38 m) |
| Height To Top Of Cab | 11.13 ft (3.39 m) |
| Length | 27.67 ft (8.43 m) |
| Length With Bucket On Ground | 24.30 ft (7.41 m) |
| Turning Circle | 48.13 ft (14.67 m) |
| Weight | 41,000.00 lbs (18,597.31 kg) |
| Wheelbase | 10.83 ft (3.30 m) |
| Width | 9.25 ft (2.82 m) |
| Width Over Tires | 9.26 ft (2.82 m) |
| Brake | Hydraulic, Wet disc |
|---|---|
| Maximum Speeds/Fwd Mph (Km/H) | 37.2 |
| Maximum Speeds/Rev Mph (Km/H) | 37.2 |
| Number Of Speeds - Forward | 4 |
| Number Of Speeds - Reverse | 4 |
| Ride Control System | Standard |
| Transmission | Automatic Powershift |
| Air Cleaner | Dry type |
|---|---|
| Aspiration | Turbocharged, after cooled |
| Bore | 4.50 in (11.43 cm) |
| Displacement | 504.70 cu in (8,270.57 cu cm) |
| Engine Make | 2238 |
| Engine Model | SAA6D114E-3 |
| Engine Type | Water-cooled, 4-cycle |
| Fan Drive Method | ?Hydraulic |
| Filter | Full-flow type |
| Fuel System | Direct injection |
| Governor | All-speed, electronic |
| Horsepower, Gross-Sae J1995 | 232.00 hp (173.01 kw) |
| Horsepower, Net-Iso 9249 | 230.70 hp (172.04 kw) |
| Lubrication Method | Gear pump, force-lubricatio |
| Number Of Cylinders | 6 |
| Piston Displacement | 504.70 cu in (8,270.57 cu cm) |
| Power Measured @ | 2100 rpm |
| Stroke | 5.40 in (13.72 cm) |
| Differential Gear | Torque proportioning |
|---|---|
| Final Reduction Gear | Planetary gear, single reduction |
| Reduction Gear | Spiral bevel gear |
| Bore | 3.00 in (7.62 cm) |
|---|---|
| Bucket Cylinde Bore | 6.30 in (16.00 cm) |
| Bucket Cylinde Stroke | 21.10 in (53.59 cm) |
| Control Positions Boom | Raise, hold, lower, and float |
| Control Positions Bucket | Tilt-back, hold, and dump |
| Control Valve | 2-spool type |
| Dump Time | 2 sec |
| Hydraulic Cylinders Type | Double-acting, piston type |
| Lift Cylinder | 2 |
| Lift Cylinder Bore | 5.20 in (13.21 cm) |
| Lift Cylinder Stroke | 30.60 in (77.72 cm) |
| Loader Control Type | Piston Pump |
| Loader Control_Capcity | 54.20 gal (205.15 l) |
| Lower Time | 3.3 sec |
| No.Of.Bucket Cylinders | 1 |
| Number Of Cylinders | 2 |
| Pump Flow Capacity | 36.20 gpm (137.02 lpm) |
| Pump Type | Gear type pump |
| Raise Time | 6.1 sec |
| Relief Valve Setting | 24.5 MPa 250 kgf/cm 2 3,555 psi |
| Steering Pump Type | Piston Pump |
| Stroke | 17.50 in (44.45 cm) |
| Breakout Force | 18400 kgf |
|---|---|
| Bucket Capacity Range – Sae | 3.1 - 4.6 |
| Bucket Description | GP Bucket, Bolt Edge |
| Bucket Link Type | Z-Bar |
| Bucket Width | 10.10 ft (3.08 m) |
| Dump Clearance, @45 Degrees Dump Angle | 10.00 ft (3.05 m) |
| Dump Reach, @45 Degrees Dump Angle | 4.00 ft (1.22 m) |
| Standard Bucket Capacity – Sae | 5 cu yd |
| Static Tipping Load,Full Turn | 30,225.40 lbs (13,710.03 kg) |
| Minimum Turning Radius At The Centre Of Outside Tire | 20.80 ft (6.34 m) |
|---|---|
| Steering System Type | Articulated |
| Standard Fitment Size | 23.5 R25 L3 |
|---|
| Max Speed - Forward | 21.20 mph (34.12 kph) |
|---|---|
| Max Speed - Reverse | 22.10 mph (35.57 kph) |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Transmission Type | Automatic full-power shift |
| Operating Weight | 41,072.20 lbs (18,630.06 kg) |
|---|