Komatsu WA600-6 Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Komatsu ➔
Model: WA600-6 ➔

Axles

Komatsu WA600-6 Wheel Loader Axles specifications
Drive System	Four-wheel drive
Front	Fixed, semi-floating
Rear	Center-pin support, semi-floating, 24 ? total oscillation

Brakes

Komatsu WA600-6 Wheel Loader Brakes specifications
Emergency Brake	Parking brake is commonly used
Parking Brake	Wet
Service Brake	Hydraulically actuated

Capacities

Komatsu WA600-6 Wheel Loader Capacities specifications
Cooling System	38.90 gal (147.24 l)
Engine Oil	22.80 gal (86.30 l)
Front Axle	9,458.70 cu in (155,000.66 cu cm)
Fuel Tank - Diesel	189.70 gal (718.01 l)
Hydraulic System	117.10 gal (443.22 l)
Rear Axle	41.00 gal (155.19 l)
Torque Converter, Transmission And Retarder Cooling	22.00 gal (83.27 l)

Dimensions

Komatsu WA600-6 Wheel Loader Dimensions specifications
Ground Clearance	1.73 ft (0.53 m)
Height To Top Of Cab	14.64 ft (4.46 m)
Length	471.86 in (1,198.52 cm)
Turning Circle	56.47 ft (17.21 m)
Wheelbase	14.77 ft (4.50 m)
Width Over Tires	11.62 ft (3.54 m)

Driveline

Komatsu WA600-6 Wheel Loader Driveline specifications
Brake	Hydraulic, Wet disc
Maximum Speeds/Fwd Mph (Km/H)	37
Maximum Speeds/Rev Mph (Km/H)	37
Number Of Speeds - Forward	4
Number Of Speeds - Reverse	4
Ride Control System	Standard
Transmission	Automatic Powershift

Engine

Komatsu WA600-6 Wheel Loader Engine specifications
Air Cleaner	Dry type
Aspiration	Turbocharged, after cooledEGR
Bore	6.70 in (17.02 cm)
Displacement	1,412.70 cu in (23,150.06 cu cm)
Engine Make	2238
Engine Model	SAA6D170E-5
Engine Type	Water-cooled, 4-cycle
Fan Drive Method	?Hydraulic
Filter	Full-flow type
Fuel System	Direct injection
Governor	All-speed, electronic
Horsepower, Gross-Sae J1995	531.10 hp (396.05 kw)
Horsepower, Net-Iso 9249	527.10 hp (393.06 kw)
Lubrication Method	Gear pump, force-lubricatio
Number Of Cylinders	6
Piston Displacement	1,412.70 cu in (23,150.06 cu cm)
Stroke	6.70 in (17.02 cm)

Final Drive

Komatsu WA600-6 Wheel Loader Final Drive specifications
Differential Gear	Torque proportioning
Final Reduction Gear	Planetary gear, single reduction
Reduction Gear	Spiral bevel gear

Hydraulic System

Komatsu WA600-6 Wheel Loader Hydraulic System specifications
Bore	4.60 in (11.68 cm)
Bucket Cylinde Bore	8.90 in (22.61 cm)
Bucket Cylinde Stroke	30.60 in (77.72 cm)
Control Positions Boom	Raise, hold, lower, and float
Control Positions Bucket	Tilt-back, hold, and dump
Control Valve	2-spool type
Dump Time	2.3 sec
Hydraulic Cylinders Type	Double-acting, piston type
Lift Cylinder	2
Lift Cylinder Bore	7.90 in (20.07 cm)
Lift Cylinder Stroke	42.10 in (106.93 cm)
Loader Control Capacity	126.30 gpm (478.05 lpm)
Loader Control Type	Piston Pump
Lower Time	4.1 sec
No.Of.Bucket Cylinders	1
Number Of Cylinders	2
Pump Flow Capacity	43.10 gpm (163.13 lpm)
Pump Type	Piston Pump
Raise Time	9.3 sec
Relief Valve Setting	34.3 MPa 350 kgf/cm 4,980 PSI
Steering Pump Type	Piston Pump
Stroke	20.10 in (51.05 cm)

Operational

Komatsu WA600-6 Wheel Loader Operational specifications
Breakout Force	25000 kgf
Bucket Capacity Range – Sae	6.4 - 7.0 m3
Bucket Description	GP Bucket, Bolt Edge
Bucket Link Type	Z-bar
Bucket Width	9.00 ft (2.74 m)
Dump Clearance, @45 Degrees Dump Angle	10.90 ft (3.32 m)
Dump Reach, @45 Degrees Dump Angle	5.00 ft (1.52 m)
Standard Bucket Capacity – Sae	8.4 cu yd
Static Tipping Load,Full Turn	50,510.20 lbs (22,911.07 kg)

Steering System

Komatsu WA600-6 Wheel Loader Steering System specifications
Minimum Turning Radius At The Centre Of Outside Tire	23.30 ft (7.10 m)
Steering System Type	Articulated

Tires

Komatsu WA600-6 Wheel Loader Tires specifications
Standard Fitment Size	35/65 R33 2star L5

Transmission

Komatsu WA600-6 Wheel Loader Transmission specifications
Max Speed - Forward	21.10 mph (33.96 kph)
Max Speed - Reverse	23.00 mph (37.01 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	4
Transmission Type	Full-power shift, planetary type

Weights

Komatsu WA600-6 Wheel Loader Weights specifications
Operating Weight	119,049.70 lbs (54,000.10 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon