Komatsu WA700-3 Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Komatsu ➔
Model: WA700-3 ➔

Brakes

Komatsu WA700-3 Wheel Loader Brakes specifications
Emergency Brake	Uses parking brake
Parking Brake	Dry-disc type, hydraulic released, spring applied on front drive shaft
Service Brake	4-wheel, systematic brake for front/rear wheel, hydraulically actuated, wet multiple-disc

Capacities

Komatsu WA700-3 Wheel Loader Capacities specifications
Axle Each (Front & Rear)	64.80 gal (245.27 l)
Cooling System	55.30 gal (209.31 l)
Engine Oil	13.80 gal (52.23 l)
Fuel Tank	290.60 gal (1,099.92 l)
Hydraulic System	124.20 gal (470.10 l)
Torque Converter, Transmission And Retarder Cooling	27.80 gal (105.22 l)

Dimensions

Komatsu WA700-3 Wheel Loader Dimensions specifications
Ground Clearance	1.92 ft (0.59 m)
Height To Top Of Cab	15.87 ft (4.84 m)
Length	12,160.00 mm (478.74 in)
Wheelbase	188.98 in (480.01 cm)
Width Over Tyres	163.78 in (416.00 cm)

Driveline

Komatsu WA700-3 Wheel Loader Driveline specifications
Brake	Hydraulic, Wet disc
Maximum Speeds Fwd	21.70 mph (34.92 kph)
Maximum Speeds Rev	23.40 mph (37.66 kph)
Number Of Speeds - Forward	4
Number Of Speeds - Reverse	4
Ride Control System	Standard
Transmission Type	Automatic Powershift

Engine

Komatsu WA700-3 Wheel Loader Engine specifications
Air Cleaner	Dry type with double elements and dust evacuator, plus dust indicator
Aspiration	Turbocharged and aftercooled
Bore	6.70 in (17.02 cm)
Displacement	1,412.70 cu in (23,150.06 cu cm)
Engine Model	Komatsu SAA6D170E-3
Engine Type	Water-cooled, 4-cycle
Fan Drive Method	Hydraulic
Filter	Full-flow type
Fuel Type	Direct injection
Governor	Electronic, all-speed control
Horsepower, Net-Iso 9249	673.20 hp (502.01 kw)
Horsepower, Net-Sae J1349	673.20 hp (502.01 kw)
Lubrication Method	Gear pump, force-lubrication
Number Of Cylinders	?6
Rated Power	?2000
Stroke	6.70 in (17.02 cm)

Final Drive

Komatsu WA700-3 Wheel Loader Final Drive specifications
Differential Gear	Straight bevel gear
Drive System	Four-wheel drive
Final Reduction Gear	Planetary gear, single reduction, oil bath
Front	Fixed, full-floating
Rear	Center-pin-support, fullfloating 22° total oscillation
Reduction Gear	Spiral bevel gear

Hydraulic System

Komatsu WA700-3 Wheel Loader Hydraulic System specifications
Boom	Raise, hold, lower, and float
Bore	5.20 in (13.21 cm)
Bucket	Tilt-back, hold, and dump
Control Positions Boom	Raise, hold, lower, and float
Control Positions Bucket	Tilt-back, hold, and dump
Control Valve	2-spool type
Dump Time	2.5 sec
Hydraulic Cylinders Type	Double-acting, piston type
Hydraulic Pump	Piston pump
Loader Control Capacity	107.00 gpm (405.00 lpm)
Loader Control Type	Piston Pump
Lower Time	3.6 sec
Number Of Cylinders	2
Raise Time	9.7 sec
Relief Valve Setting	4550 psi
Steering Pump Type	Piston Pump
Steering System Capacity	53.70 gpm (203.25 lpm)
Stroke	532.00 mm (20.94 in)

Operational

Komatsu WA700-3 Wheel Loader Operational specifications
Breakout Force	52700 kgf
Bucket Capacity Range – Sae	8.7 - 9.4 m3
Bucket Description	Spade nose with teeth and segments
Bucket Link Type	Z-Bar
Bucket Width	14.30 ft (4.36 m)
Dump Clearance, @45 Degrees Dump Angle	13.50 ft (4.11 m)
Dump Reach, @45 Degrees Dump Angle	7.10 ft (2.16 m)
Standard Bucket Capacity – Sae	11.4 cu yd
Static Tipping Load,Full Turn	90,543.90 lbs (41,070.07 kg)

Steering System

Komatsu WA700-3 Wheel Loader Steering System specifications
Minimum Turning Radius At The Centre Of Outside Tire	26.60 ft (8.11 m)
Steering Angle	40 degrees
Steering System Type	Articulated type, fullhydraulic power steering

Transmission

Komatsu WA700-3 Wheel Loader Transmission specifications
Transmission Type	Automatic full-powershift, countershaft type

Tyres

Komatsu WA700-3 Wheel Loader Tyres specifications
Standard Fitment Size	Standard45/65 R39 L5

Weights

Komatsu WA700-3 Wheel Loader Weights specifications
Operating Weight	157,851.00 lbs (71,600.10 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon