Liebherr L542 Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Liebherr ➔
Model: L542 ➔

Bucket

Liebherr L542 Wheel Loader Bucket specifications
Arm length	8.20 ft (2.50 m)
Breakout Force	24,054.60 lbs (10,911.00 kg)
Bucket Capacity - heaped	3.70 cu yd (2.83 cu m)
Bucket Width	8.20 ft (2.50 m)
Digging depth	2.00 ft (0.61 m)
Dump Clearance at Max Raise	8.10 ft (2.47 m)

Dimensions

Liebherr L542 Wheel Loader Dimensions specifications
Ground Clearance	1.70 ft (0.52 m)
Height - Top of Cab	10.80 ft (3.29 m)
Hinge Pin - Max Height	12.90 ft (3.93 m)
Length with Bucket on Ground	24.10 ft (7.35 m)
Reach at Max Lift and Dump	3.80 ft (1.16 m)
Wheelbase	9.90 ft (3.02 m)

Electrical System

Liebherr L542 Wheel Loader Electrical System specifications
Alternator	24/100 (V/A)
Battery	2 x 135 Ah
Starter	24/10.5 (V/HP)
Voltage	24 V

Engine

Liebherr L542 Wheel Loader Engine specifications
Air cleaner	Dry air filter with main and safety element pre-cleaner service indicator on the display
Aspiration	Water-cooled with exhaust turbo charging externally cooled exhaust gas recirculation and diesel particulate filter
Bore	4.20 in (10.67 cm)
Displacement	275.00 cu in (4,506.45 cu cm)
Engine Model	4045HFL93
Fuel injection	Electronic Common Rail high-pressure injection
Gross Power	161.00 hp (120.06 kw)
Max Torque	476.00 lbs ft (645.36 nm)
Number of Cylinders	4
Power Measured @	2000 rpm
Stroke	5.00 in (12.70 cm)
Torque Measured @	1600 rpm

Hydraulic System

Liebherr L542 Wheel Loader Hydraulic System specifications
Dump Time	1.6 seconds
Lower Time	4 seconds
Pump Flow Capacity	45.00 gpm (170.33 lpm)
Pump Type	Load-sensing variable axial piston pump with output and flow control and pressure cut-off in the control block
Raise Time	5.3 seconds
Relief Valve Setting	4351.2 psi

Operating Specifications

Liebherr L542 Wheel Loader Operating Specifications specifications
Cooling System Fluid Capacity	10.00 gal (37.85 l)
Engine Oil Fluid Capacity	5.40 gal (20.44 l)
Front Axle/Diff Fluid Capacity	4.30 gal (16.28 l)
Fuel Capacity	54.20 gal (205.15 l)
Hydraulic Fluid Capacity	29.00 gal (109.77 l)
Hydraulic System Fluid Capacity	47.60 gal (180.17 l)
Operating Weight	29,540.00 lbs (13,399.14 kg)
Rear Axle/Diff Fluid Capacity	4.00 gal (15.14 l)
Static Tipping Weight	22,485.00 lbs (10,199.04 kg)
Tire Size	20.5R25 L3
Transmission Fluid Capacity	1.00 gal (3.79 l)
Turning Radius	20.20 ft (6.16 m)

Transmission

Liebherr L542 Wheel Loader Transmission specifications
Max Speed - Forward	24.90 mph (40.07 kph)
Max Speed - Reverse	24.90 mph (40.07 kph)
Number of Forward Gears	3
Number of Reverse Gears	3

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon