Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Arm length | 8.6 ft (3 m) |
Breakout Force | 28101.2 lbs (12,747 kg) |
Bucket Capacity - heaped | 3.9 cu yd (3 cu m) |
Bucket Width | 8.1 ft (2 m) |
Digging depth | 3 ft (1 m) |
Dump Clearance at Max Raise | 9.5 ft (3 m) |
Ground Clearance | 1.7 ft (1 m) |
Height - Top of Cab | 11.1 ft (3 m) |
Hinge Pin - Max Height | 13.4 ft (4 m) |
Length with Bucket on Ground | 28.1 ft (9 m) |
Reach at Max Lift and Dump | 3.9 ft (1 m) |
Wheelbase | 11.2 ft (3 m) |
Alternator | 28/140 (V/A) |
Battery | 2 x 180 Ah |
Starter | 24/10.5 (V/HP) |
Voltage | 24 V |
Air cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
Bore | 4.8 in (12 cm) |
Displacement | 428 cu in (0 cu m) |
Engine Model | D934 A7 |
Fuel injection | Electronic Common Rail high-pressure injection |
Gross Power | 192 hp (143 kw) |
Max Torque | 896 lbs ft |
Net Power | 188 hp (140 kw) |
Number of Cylinders | 4 |
Power Measured @ | 1800 rpm |
Stroke | 6 in (15 cm) |
Torque Measured @ | 1100 rpm |
Dump Time | 2.3 seconds |
Lower Time | 2.7 seconds |
Pump Flow Capacity | 62 gpm (235 lpm) |
Pump Type | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
Raise Time | 5.5 seconds |
Relief Valve Setting | 4351.2 psi |
Cooling System Fluid Capacity | 17.7 gal (67 l) |
Engine Oil Fluid Capacity | 6.9 gal (26 l) |
Front Axle/Diff Fluid Capacity | 9.2 gal (35 l) |
Fuel Capacity | 74 gal (280 l) |
Hydraulic Fluid Capacity | 27.7 gal (105 l) |
Hydraulic System Fluid Capacity | 46.2 gal (175 l) |
Operating Weight | 39020 lbs (17,699 kg) |
Rear Axle/Diff Fluid Capacity | 9.2 gal (35 l) |
Static Tipping Weight | 26895 lbs (12,199 kg) |
Tire Size | 23.5R25 L3 |
Turning Radius | 21.9 ft (7 m) |