Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 29,225.17 lbs (13,256.33 kg) |
|---|---|
| Bucket Capacity - Heaped | 4.58 cu yd |
| Bucket Width | 8.86 ft (2.70 m) |
| Dump Clearance At Max Raise | 10.13 ft (3.09 m) |
| Ground Clearance | 1.74 ft (0.53 m) |
|---|---|
| Height To Top Of Cab | 11.01 ft (3.36 m) |
| Hinge Pin - Max Height | 13.72 ft (4.18 m) |
| Length With Bucket On Ground | 26.68 ft (8.13 m) |
| Reach At Max Lift And Dump | 3.52 ft (1.07 m) |
| Wheelbase | 10.34 ft (3.15 m) |
| Aspiration | Inline engine, water-cooled exhaust-turbo charged with intercooler |
|---|---|
| Displacement | 405.20 cu in (6,640.05 cu cm) |
| Engine Make | 2245 |
| Engine Model | D 924 TI-E A2 |
| Gross Power | 198.00 hp (147.65 kw) |
| Max Torque | 591.60 lbs ft (802.09 nm) |
| Number Of Cylinders | 4 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1200 rpm |
| Dump Time | 2.3 sec |
|---|---|
| Lower Time | 2.7 sec |
| Pump Flow Capacity | 60.80 gpm (230.13 lpm) |
| Pump Type | Load-sensing variable axial piston pump with output control and pressure cutoff |
| Raise Time | 5.5 sec |
| Relief Valve Setting | 4786.3 psi |
| Alternator Supplied Amperage | 55 amps |
|---|---|
| Engine Oil Fluid Capacity | 5.50 gal (20.82 l) |
| Front Axle/Diff Fluid Capacity | 13.50 gal (51.10 l) |
| Fuel Capacity | 68.70 gal (260.03 l) |
| Hydraulic System Fluid Capacity | 58.20 gal (220.29 l) |
| Operating Voltage | 24 V |
| Operating Weight | 38,140.00 lbs (17,300.03 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 7.40 gal (28.01 l) |
| Static Tipping Weight | 30,699.40 lbs (13,925.03 kg) |
| Tire Size | 23.5 R 25 |
| Turning Radius | 20.90 ft (6.37 m) |
| Max Speed - Forward | 24.90 mph (40.07 kph) |
|---|---|
| Max Speed - Reverse | 24.90 mph (40.07 kph) |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Transmission Type | Stepless hydrostatic travel drive 2plus2 |