Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Bucket Capacity - heaped | 4.80 cu yd (3.67 cu m) |
| Bucket Width | 8.90 ft (2.71 m) |
| Dump Clearance at Max Raise | 9.40 ft (2.87 m) |
| Ground Clearance | 1.80 ft (0.55 m) |
| Height - Top of Cab | 11.10 ft (3.38 m) |
| Hinge Pin - Max Height | 12.90 ft (3.93 m) |
| Length with Bucket on Ground | 27.10 ft (8.26 m) |
| Wheelbase | 10.80 ft (3.29 m) |
| Aspiration | turbo-charged |
| Displacement | 427.80 cu in (7,010.40 cu cm) |
| Engine Model | D 934 L A6 |
| Gross Power | 187.80 hp (140.04 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1300 rpm |
| Dump Time | 2.3 seconds |
| Lower Time | 2.7 seconds |
| Pump Flow Capacity | 61.90 gpm (234.29 lpm) |
| Pump Type | Load-sensing swash plate type variable flow pump with output and flow control and pressure cut-off in the control block |
| Raise Time | 5.5 seconds |
| Relief Valve Setting | 4786.3 psi |
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 11.90 gal (45.04 l) |
| Engine Oil Fluid Capacity | 8.20 gal (31.04 l) |
| Front Axle/Diff Fluid Capacity | 10.10 gal (38.23 l) |
| Fuel Capacity | 79.30 gal (300.15 l) |
| Hydraulic System Fluid Capacity | 63.50 gal (240.35 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 38,073.90 lbs (17,270.05 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 8.00 gal (30.28 l) |
| Tire Size | 23.5R25 |
| Transmission Fluid Capacity | 3.10 gal (11.73 l) |
| Max Speed - Forward | 24.90 mph (40.07 kph) |
| Max Speed - Reverse | 24.90 mph (40.07 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Transmission Type | hydrostatic |